Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/tests/net/if_pppoe Add test cases for AC-Name and Service-Name



details:   https://anonhg.NetBSD.org/src/rev/ed2f2957f282
branches:  trunk
changeset: 955248:ed2f2957f282
user:      yamaguchi <yamaguchi%NetBSD.org@localhost>
date:      Fri Sep 25 06:07:31 2020 +0000

description:
Add test cases for AC-Name and Service-Name

diffstat:

 tests/net/if_pppoe/t_pppoe.sh |  330 +++++++++++++++++++++++++++++++++++++++--
 1 files changed, 311 insertions(+), 19 deletions(-)

diffs (truncated from 368 to 300 lines):

diff -r 2e71fabd92d7 -r ed2f2957f282 tests/net/if_pppoe/t_pppoe.sh
--- a/tests/net/if_pppoe/t_pppoe.sh     Fri Sep 25 06:06:15 2020 +0000
+++ b/tests/net/if_pppoe/t_pppoe.sh     Fri Sep 25 06:07:31 2020 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: t_pppoe.sh,v 1.21 2020/09/23 06:18:20 yamaguchi Exp $
+#      $NetBSD: t_pppoe.sh,v 1.22 2020/09/25 06:07:31 yamaguchi Exp $
 #
 # Copyright (c) 2016 Internet Initiative Japan Inc.
 # All rights reserved.
@@ -62,6 +62,35 @@
        cleanup
 }
 
+setup_ifaces()
+{
+
+       rump_server_add_iface $SERVER shmif0 $BUS
+       rump_server_add_iface $CLIENT shmif0 $BUS
+       rump_server_add_iface $SERVER pppoe0
+       rump_server_add_iface $CLIENT pppoe0
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 rump.ifconfig shmif0 up
+       $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \
+           inet $SERVER_IP $CLIENT_IP down
+       atf_check -s exit:0 rump.ifconfig pppoe0 link0
+
+       $DEBUG && rump.ifconfig
+       $DEBUG && $HIJACKING pppoectl -d pppoe0
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig shmif0 up
+
+       $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \
+           inet 0.0.0.0 0.0.0.1 down
+
+       $DEBUG && rump.ifconfig
+       $DEBUG && $HIJACKING pppoectl -d pppoe0
+       unset RUMP_SERVER
+}
+
 setup()
 {
        inet=true
@@ -73,30 +102,13 @@
        rump_server_start $SERVER netinet6 pppoe
        rump_server_start $CLIENT netinet6 pppoe
 
-       rump_server_add_iface $SERVER shmif0 $BUS
-       rump_server_add_iface $CLIENT shmif0 $BUS
+       setup_ifaces
 
        export RUMP_SERVER=$SERVER
-       atf_check -s exit:0 rump.ifconfig shmif0 up
-
-       rump_server_add_iface $SERVER pppoe0
-       $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \
-           inet $SERVER_IP $CLIENT_IP down
-       atf_check -s exit:0 rump.ifconfig pppoe0 link0
-
-       $DEBUG && rump.ifconfig
-       $DEBUG && $HIJACKING pppoectl -d pppoe0
-
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
        unset RUMP_SERVER
 
        export RUMP_SERVER=$CLIENT
-       atf_check -s exit:0 rump.ifconfig shmif0 up
-
-       rump_server_add_iface $CLIENT pppoe0
-       $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \
-           inet 0.0.0.0 0.0.0.1 down
-
        atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
        unset RUMP_SERVER
 }
@@ -426,10 +438,290 @@
        cleanup
 }
 
+atf_test_case pppoe_params cleanup
+
+dump_bus()
+{
+
+       shmif_dumpbus -p - ${BUS} | tcpdump -n -e -r -
+}
+
+setup_auth_conf()
+{
+       local auth=chap
+
+       export RUMP_SERVER=$SERVER
+       local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \
+                                   'hisauthname=$AUTHNAME' \
+                                   'hisauthsecret=$SECRET' \
+                                   'myauthproto=none' \
+                                   $server_optparam"
+
+       atf_check -s exit:0 rump.ifconfig pppoe0 link0
+       atf_check -s exit:0 -x "$HIJACKING $setup_serverparam"
+       unset RUMP_SERVER
+
+       local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \
+                                   'myauthname=$AUTHNAME' \
+                                   'myauthsecret=$SECRET' \
+                                   'hisauthproto=none'"
+
+       export RUMP_SERVER=$CLIENT
+       $inet && atf_check -s exit:0 rump.ifconfig pppoe0 \
+           inet 0.0.0.0 0.0.0.1 down
+       atf_check -s exit:0 -x "$HIJACKING $setup_clientparam"
+       $DEBUG && rump.ifconfig
+       unset RUMP_SERVER
+}
+
+pppoe_params_head()
+{
+       atf_set "descr" "Set and clear access concentrator name and service name"
+       atf_set "require.progs" "rump_server pppoectl"
+}
+
+pppoe_params_body()
+{
+       local dumpcmd
+
+       dumpcmd="shmif_dumpbus -p - ${BUS}"
+       dumpcmd="${dumpcmd} | tcpdump -n -e -r -"
+
+       rump_server_start $SERVER netinet6 pppoe
+       rump_server_start $CLIENT netinet6 pppoe
+
+       setup_ifaces
+       setup_auth_conf
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADR"
+       atf_check -s exit:0 -o not-match:'AC-Name' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # set Remote access concentrator name (AC-NAME, -a option)
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[AC-Name "ACNAME-TEST0"\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # change AC-NAME
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -a ACNAME-TEST1 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[AC-Name "ACNAME-TEST1"\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # clear AC-NAME
+       rump_server_destroy_ifaces
+       rm ${BUS} 2> /dev/null
+       setup_ifaces
+       setup_auth_conf
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -a ACNAME-TEST2 -e shmif0 pppoe0"
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -a \"\" -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADR"
+       atf_check -s exit:0 -o match:'\[AC-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # set Service Name (Service-Name, -s option)
+       rump_server_destroy_ifaces
+       rm ${BUS} 2> /dev/null
+       setup_ifaces
+       setup_auth_conf
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -s SNAME-TEST0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[Service-Name "SNAME-TEST0"\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+       atf_check -s exit:0 -o match:'\[Service-Name "SNAME-TEST0"\]' -e ignore \
+           -x "${dumpcmd} | grep PADR"
+       atf_check -s exit:0 -o not-match:'AC-Name' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # change Service-Name
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 -s SNAME-TEST1 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[Service-Name "SNAME-TEST1"\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+       atf_check -s exit:0 -o match:'\[Service-Name "SNAME-TEST1"\]' -e ignore \
+           -x "${dumpcmd} | grep PADR"
+
+       # clear Service-Name
+       rump_server_destroy_ifaces
+       rm ${BUS} 2> /dev/null
+       setup_ifaces
+       setup_auth_conf
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -s SNAME-TEST2 -e shmif0 pppoe0"
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -s \"\" -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       $DEBUG && rump.ifconfig
+       wait_for_session_established
+       unset RUMP_SERVER
+
+       $DEBUG && dump_bus
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+       atf_check -s exit:0 -o match:'\[Service-Name\]' -e ignore \
+           -x "${dumpcmd} | grep PADR"
+       atf_check -s exit:0 -o not-match:'AC-Name' -e ignore \
+           -x "${dumpcmd} | grep PADI"
+
+       # set AC-NAME and Service-Name
+       rump_server_destroy_ifaces
+       rm ${BUS} 2> /dev/null
+       setup_ifaces
+       setup_auth_conf
+
+       export RUMP_SERVER=$SERVER
+       atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0"
+       atf_check -s exit:0 rump.ifconfig pppoe0 up
+       unset RUMP_SERVER
+
+       export RUMP_SERVER=$CLIENT
+       atf_check -s exit:0 rump.ifconfig pppoe0 down
+       wait_for_disconnected



Home | Main Index | Thread Index | Old Index