[pkgsrc/trunk]: pkgsrc/archivers/xz xz: updated to 5.2.5

[adam <adam%pkgsrc.org@localhost>]

details:   https://anonhg.NetBSD.org/pkgsrc/rev/1168d1480da0
branches:  trunk
changeset: 430684:1168d1480da0
user:      adam <adam%pkgsrc.org@localhost>
date:      Sun May 03 10:10:43 2020 +0000

description:
xz: updated to 5.2.5

5.2.5:
* liblzma:

    - Fixed several C99/C11 conformance bugs. Now the code is clean
      under gcc/clang -fsanitize=undefined. Some of these changes
      might have a negative effect on performance with old GCC
      versions or compilers other than GCC and Clang. The configure
      option --enable-unsafe-type-punning can be used to (mostly)
      restore the old behavior but it shouldn't normally be used.

    - Improved API documentation of lzma_properties_decode().

    - Added a very minor encoder speed optimization.

* xz:

    - Fixed a crash in "xz -dcfv not_an_xz_file". All four options
      were required to trigger it. The crash occurred in the
      progress indicator code when xz was in passthru mode where
      xz works like "cat".

    - Fixed an integer overflow with 32-bit off_t. It could happen
      when decompressing a file that has a long run of zero bytes
      which xz would try to write as a sparse file. Since the build
      system enables large file support by default, off_t is
      normally 64-bit even on 32-bit systems.

    - Fixes for --flush-timeout:
        * Fix semi-busy-waiting.
        * Avoid unneeded flushes when no new input has arrived
          since the previous flush was completed.

    - Added a special case for 32-bit xz: If --memlimit-compress is
      used to specify a limit that exceeds 4020 MiB, the limit will
      be set to 4020 MiB. The values "0" and "max" aren't affected
      by this and neither is decompression. This hack can be
      helpful when a 32-bit xz has access to 4 GiB address space
      but the specified memlimit exceeds 4 GiB. This can happen
      e.g. with some scripts.

    - Capsicum sandbox is now enabled by default where available
      (FreeBSD >= 10). The sandbox debug messages (xz -vv) were
      removed since they seemed to be more annoying than useful.

    - DOS build now requires DJGPP 2.05 instead of 2.04beta.
      A workaround for a locale problem with DJGPP 2.05 was added.

* xzgrep and other scripts:

    - Added a configure option --enable-path-for-scripts=PREFIX.
      It is disabled by default except on Solaris where the default
      is /usr/xpg4/bin. See INSTALL for details.

    - Added a workaround for a POSIX shell detection problem on
      Solaris.

* Build systems:

    - Added preliminary build instructions for z/OS. See INSTALL
      section 1.2.9.

    - Experimental CMake support was added. It should work to build
      static liblzma on a few operating systems. It may or may not
      work to build shared liblzma. On some platforms it can build
      xz and xzdec too but those are only for testing. See the
      comment in the beginning of CMakeLists.txt for details.

    - Visual Studio project files were updated.
      WindowsTargetPlatformVersion was removed from VS2017 files
      and set to "10.0" in the added VS2019 files. In the future
      the VS project files will be removed when CMake support is
      good enough.

    - New #defines in config.h: HAVE___BUILTIN_ASSUME_ALIGNED,
      HAVE___BUILTIN_BSWAPXX, and TUKLIB_USE_UNSAFE_TYPE_PUNNING.

    - autogen.sh has a new optional dependency on po4a and a new
      option --no-po4a to skip that step. This matters only if one
      wants to remake the build files. po4a is used to update the
      translated man pages but as long as the man pages haven't
      been modified, there's nothing to update and one can use
      --no-po4a to avoid the dependency on po4a.

* Translations:

    - XZ Utils translations are now handled by the Translation
      Project: https://translationproject.org/domain/xz.html

    - All man pages are now included in German too.

    - New xz translations: Brazilian Portuguese, Finnish,
      Hungarian, Chinese (simplified), Chinese (traditional),
      and Danish (partial translation)

    - Updated xz translations: French, German, Italian, and Polish

    - Unfortunately a few new xz translations weren't included due
      to technical problems like too long lines in --help output or
      misaligned column headings in tables. In the future, many of
      these strings will be split and e.g. the table column
      alignment will be handled in software. This should make the
      strings easier to translate.

diffstat:

 archivers/xz/Makefile |   4 ++--
 archivers/xz/PLIST    |  30 +++++++++++++++++++++++++++++-
 archivers/xz/distinfo |  10 +++++-----
 3 files changed, 36 insertions(+), 8 deletions(-)

diffs (81 lines):

diff -r 494834c0c447 -r 1168d1480da0 archivers/xz/Makefile
--- a/archivers/xz/Makefile     Sun May 03 10:10:05 2020 +0000
+++ b/archivers/xz/Makefile     Sun May 03 10:10:43 2020 +0000
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.28 2018/09/02 21:03:22 maya Exp $
+# $NetBSD: Makefile,v 1.29 2020/05/03 10:10:43 adam Exp $
 
-DISTNAME=      xz-5.2.4
+DISTNAME=      xz-5.2.5
 CATEGORIES=    archivers
 MASTER_SITES=  https://tukaani.org/xz/
 EXTRACT_SUFX=  .tar.bz2
diff -r 494834c0c447 -r 1168d1480da0 archivers/xz/PLIST
--- a/archivers/xz/PLIST        Sun May 03 10:10:05 2020 +0000
+++ b/archivers/xz/PLIST        Sun May 03 10:10:43 2020 +0000
@@ -1,4 +1,4 @@
-@comment $NetBSD: PLIST,v 1.9 2014/12/30 06:37:35 adam Exp $
+@comment $NetBSD: PLIST,v 1.10 2020/05/03 10:10:44 adam Exp $
 bin/lzcat
 bin/lzcmp
 bin/lzdiff
@@ -39,6 +39,28 @@
 include/lzma/vli.h
 lib/liblzma.la
 lib/pkgconfig/liblzma.pc
+${PLIST.nls}man/de/man1/lzcat.1
+${PLIST.nls}man/de/man1/lzcmp.1
+${PLIST.nls}man/de/man1/lzdiff.1
+${PLIST.nls}man/de/man1/lzegrep.1
+${PLIST.nls}man/de/man1/lzfgrep.1
+${PLIST.nls}man/de/man1/lzgrep.1
+${PLIST.nls}man/de/man1/lzless.1
+${PLIST.nls}man/de/man1/lzma.1
+${PLIST.nls}man/de/man1/lzmadec.1
+${PLIST.nls}man/de/man1/lzmore.1
+${PLIST.nls}man/de/man1/unlzma.1
+${PLIST.nls}man/de/man1/unxz.1
+${PLIST.nls}man/de/man1/xz.1
+${PLIST.nls}man/de/man1/xzcat.1
+${PLIST.nls}man/de/man1/xzcmp.1
+${PLIST.nls}man/de/man1/xzdec.1
+${PLIST.nls}man/de/man1/xzdiff.1
+${PLIST.nls}man/de/man1/xzegrep.1
+${PLIST.nls}man/de/man1/xzfgrep.1
+${PLIST.nls}man/de/man1/xzgrep.1
+${PLIST.nls}man/de/man1/xzless.1
+${PLIST.nls}man/de/man1/xzmore.1
 man/man1/lzcat.1
 man/man1/lzcmp.1
 man/man1/lzdiff.1
@@ -82,8 +104,14 @@
 share/doc/xz/lzma-file-format.txt
 share/doc/xz/xz-file-format.txt
 ${PLIST.nls}share/locale/cs/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/da/LC_MESSAGES/xz.mo
 ${PLIST.nls}share/locale/de/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/fi/LC_MESSAGES/xz.mo
 ${PLIST.nls}share/locale/fr/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/hu/LC_MESSAGES/xz.mo
 ${PLIST.nls}share/locale/it/LC_MESSAGES/xz.mo
 ${PLIST.nls}share/locale/pl/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/pt_BR/LC_MESSAGES/xz.mo
 ${PLIST.nls}share/locale/vi/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/zh_CN/LC_MESSAGES/xz.mo
+${PLIST.nls}share/locale/zh_TW/LC_MESSAGES/xz.mo
diff -r 494834c0c447 -r 1168d1480da0 archivers/xz/distinfo
--- a/archivers/xz/distinfo     Sun May 03 10:10:05 2020 +0000
+++ b/archivers/xz/distinfo     Sun May 03 10:10:43 2020 +0000
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.18 2018/06/05 22:28:38 adam Exp $
+$NetBSD: distinfo,v 1.19 2020/05/03 10:10:44 adam Exp $
 
-SHA1 (xz-5.2.4.tar.bz2) = 50ad451279404fb5206e23c7b1ba9c4aa858c994
-RMD160 (xz-5.2.4.tar.bz2) = 0c5a6ffd47d657fed0c7192f413422e503b79c69
-SHA512 (xz-5.2.4.tar.bz2) = 25a548c34a304ba51cdaa63813df0fa4ac2f3cf0ec6dc2d181ec5b62fe586090cd0f1c866ee7ba19e9b264ecabf9ca9f2f1dda7f95313546da4152f3cfaa7e6e
-Size (xz-5.2.4.tar.bz2) = 1287922 bytes
+SHA1 (xz-5.2.5.tar.bz2) = 19f83fb33dc51df87169864decd4b3de75dee1df
+RMD160 (xz-5.2.5.tar.bz2) = e8c9343d2a1d4aafda92f0b2d94962f16b46688d
+SHA512 (xz-5.2.5.tar.bz2) = 89e25ddf72427ee9608cbf2e9dbc24d592cb67a27f44ccf7d47e4d9405774444e9cfcd02ac4bcb92064860371ed31d3cfbecd5fe063f296ead607714c0a664a1
+Size (xz-5.2.5.tar.bz2) = 1473322 bytes
 SHA1 (patch-src_xz_Makefile.in) = b9360c7b2b34159028fb8b84339aa2faf3922287