Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/pci Fix a bug that sc_mediatype is evaluated incorre...
details: https://anonhg.NetBSD.org/src/rev/0398928e8b4c
branches: trunk
changeset: 806247:0398928e8b4c
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Fri Feb 13 09:00:50 2015 +0000
description:
Fix a bug that sc_mediatype is evaluated incorrectly. The real problem
might be occured only on fiber and serdes cases.
diffstat:
sys/dev/pci/if_wm.c | 64 ++++++++++++++++++++++++++++------------------------
1 files changed, 34 insertions(+), 30 deletions(-)
diffs (213 lines):
diff -r ed0e89bfc9f6 -r 0398928e8b4c sys/dev/pci/if_wm.c
--- a/sys/dev/pci/if_wm.c Fri Feb 13 00:31:42 2015 +0000
+++ b/sys/dev/pci/if_wm.c Fri Feb 13 09:00:50 2015 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: if_wm.c,v 1.310 2015/01/29 02:59:17 msaitoh Exp $ */
+/* $NetBSD: if_wm.c,v 1.311 2015/02/13 09:00:50 msaitoh Exp $ */
/*
* Copyright (c) 2001, 2002, 2003, 2004 Wasabi Systems, Inc.
@@ -81,7 +81,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.310 2015/01/29 02:59:17 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: if_wm.c,v 1.311 2015/02/13 09:00:50 msaitoh Exp $");
#ifdef _KERNEL_OPT
#include "opt_net_mpsafe.h"
@@ -281,6 +281,10 @@
int sc_rev; /* MAC revision */
wm_phy_type sc_phytype; /* PHY type */
uint32_t sc_mediatype; /* Media type (Copper, Fiber, SERDES)*/
+#define WM_MEDIATYPE_UNKNOWN 0x00
+#define WM_MEDIATYPE_FIBER 0x01
+#define WM_MEDIATYPE_COPPER 0x02
+#define WM_MEDIATYPE_SERDES 0x03 /* Internal SERDES */
int sc_funcid; /* unit number of the chip (0 to 3) */
int sc_flags; /* flags; see below */
int sc_if_flags; /* last if_flags */
@@ -727,10 +731,10 @@
const char *wmp_name;
wm_chip_type wmp_type;
uint32_t wmp_flags;
-#define WMP_F_UNKNOWN 0x00
-#define WMP_F_FIBER 0x01
-#define WMP_F_COPPER 0x02
-#define WMP_F_SERDES 0x03 /* Internal SERDES */
+#define WMP_F_UNKNOWN WM_MEDIATYPE_UNKNOWN
+#define WMP_F_FIBER WM_MEDIATYPE_FIBER
+#define WMP_F_COPPER WM_MEDIATYPE_COPPER
+#define WMP_F_SERDES WM_MEDIATYPE_SERDES
#define WMP_MEDIATYPE(x) ((x) & 0x03)
} wm_products[] = {
{ PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_82542,
@@ -2119,10 +2123,10 @@
wm_gmii_mediainit(sc, wmp->wmp_product);
} else if (sc->sc_type < WM_T_82543 ||
(CSR_READ(sc, WMREG_STATUS) & STATUS_TBIMODE) != 0) {
- if (sc->sc_mediatype & WMP_F_COPPER) {
+ if (sc->sc_mediatype == WM_MEDIATYPE_COPPER) {
aprint_error_dev(sc->sc_dev,
"WARNING: TBIMODE set on 1000BASE-T product!\n");
- sc->sc_mediatype = WMP_F_FIBER;
+ sc->sc_mediatype = WM_MEDIATYPE_FIBER;
}
wm_tbi_mediainit(sc);
} else {
@@ -2139,45 +2143,45 @@
switch (link_mode) {
case CTRL_EXT_LINK_MODE_1000KX:
aprint_verbose_dev(sc->sc_dev, "1000KX\n");
- sc->sc_mediatype = WMP_F_SERDES;
+ sc->sc_mediatype = WM_MEDIATYPE_SERDES;
break;
case CTRL_EXT_LINK_MODE_SGMII:
if (wm_sgmii_uses_mdio(sc)) {
aprint_verbose_dev(sc->sc_dev,
"SGMII(MDIO)\n");
sc->sc_flags |= WM_F_SGMII;
- sc->sc_mediatype = WMP_F_COPPER;
+ sc->sc_mediatype = WM_MEDIATYPE_COPPER;
break;
}
aprint_verbose_dev(sc->sc_dev, "SGMII(I2C)\n");
/*FALLTHROUGH*/
case CTRL_EXT_LINK_MODE_PCIE_SERDES:
sc->sc_mediatype = wm_sfp_get_media_type(sc);
- if (sc->sc_mediatype == WMP_F_UNKNOWN) {
+ if (sc->sc_mediatype == WM_MEDIATYPE_UNKNOWN) {
if (link_mode
== CTRL_EXT_LINK_MODE_SGMII) {
sc->sc_mediatype
- = WMP_F_COPPER;
+ = WM_MEDIATYPE_COPPER;
sc->sc_flags |= WM_F_SGMII;
} else {
sc->sc_mediatype
- = WMP_F_SERDES;
+ = WM_MEDIATYPE_SERDES;
aprint_verbose_dev(sc->sc_dev,
"SERDES\n");
}
break;
}
- if (sc->sc_mediatype == WMP_F_SERDES)
+ if (sc->sc_mediatype == WM_MEDIATYPE_SERDES)
aprint_verbose_dev(sc->sc_dev,
"SERDES\n");
/* Change current link mode setting */
reg &= ~CTRL_EXT_LINK_MODE_MASK;
switch (sc->sc_mediatype) {
- case WMP_F_COPPER:
+ case WM_MEDIATYPE_COPPER:
reg |= CTRL_EXT_LINK_MODE_SGMII;
break;
- case WMP_F_SERDES:
+ case WM_MEDIATYPE_SERDES:
reg |= CTRL_EXT_LINK_MODE_PCIE_SERDES;
break;
default:
@@ -2188,7 +2192,7 @@
case CTRL_EXT_LINK_MODE_GMII:
default:
aprint_verbose_dev(sc->sc_dev, "Copper\n");
- sc->sc_mediatype = WMP_F_COPPER;
+ sc->sc_mediatype = WM_MEDIATYPE_COPPER;
break;
}
@@ -2199,16 +2203,16 @@
reg &= ~CTRL_EXT_I2C_ENA;
CSR_WRITE(sc, WMREG_CTRL_EXT, reg);
- if (sc->sc_mediatype == WMP_F_COPPER)
+ if (sc->sc_mediatype == WM_MEDIATYPE_COPPER)
wm_gmii_mediainit(sc, wmp->wmp_product);
else
wm_tbi_mediainit(sc);
break;
default:
- if (sc->sc_mediatype & WMP_F_FIBER)
+ if (sc->sc_mediatype == WM_MEDIATYPE_FIBER)
aprint_error_dev(sc->sc_dev,
"WARNING: TBIMODE clear on 1000BASE-X product!\n");
- sc->sc_mediatype = WMP_F_COPPER;
+ sc->sc_mediatype = WM_MEDIATYPE_COPPER;
wm_gmii_mediainit(sc, wmp->wmp_product);
}
}
@@ -7249,7 +7253,7 @@
uint32_t status;
uint32_t sig;
- if (sc->sc_mediatype & WMP_F_SERDES) {
+ if (sc->sc_mediatype == WM_MEDIATYPE_SERDES) {
sc->sc_tbi_linkup = 1;
return 0;
}
@@ -7348,7 +7352,7 @@
*/
sc->sc_ctrl |= CTRL_SWDPIO(0);
sc->sc_ctrl &= ~CTRL_SWDPIO(1);
- if (sc->sc_mediatype & WMP_F_SERDES)
+ if (sc->sc_mediatype == WM_MEDIATYPE_SERDES)
sc->sc_ctrl &= ~CTRL_LRST;
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
@@ -7428,7 +7432,7 @@
uint32_t status;
int i;
- if (sc->sc_mediatype & WMP_F_SERDES)
+ if (sc->sc_mediatype == WM_MEDIATYPE_SERDES)
return 0;
if ((sc->sc_type == WM_T_82571) || (sc->sc_type == WM_T_82572)
@@ -7558,7 +7562,7 @@
KASSERT(WM_TX_LOCKED(sc));
- if (sc->sc_mediatype & WMP_F_SERDES) {
+ if (sc->sc_mediatype == WM_MEDIATYPE_SERDES) {
sc->sc_tbi_linkup = 1;
return;
}
@@ -7647,7 +7651,7 @@
uint32_t ctrl_ext;
uint8_t val = 0;
int timeout = 3;
- uint32_t mediatype = WMP_F_UNKNOWN;
+ uint32_t mediatype = WM_MEDIATYPE_UNKNOWN;
int rv = -1;
ctrl_ext = CSR_READ(sc, WMREG_CTRL_EXT);
@@ -7685,13 +7689,13 @@
}
if ((val & (SFF_SFP_ETH_FLAGS_1000SX | SFF_SFP_ETH_FLAGS_1000LX)) != 0)
- mediatype = WMP_F_SERDES;
+ mediatype = WM_MEDIATYPE_SERDES;
else if ((val & SFF_SFP_ETH_FLAGS_1000T) != 0){
sc->sc_flags |= WM_F_SGMII;
- mediatype = WMP_F_COPPER;
+ mediatype = WM_MEDIATYPE_COPPER;
} else if ((val & SFF_SFP_ETH_FLAGS_100FX) != 0){
sc->sc_flags |= WM_F_SGMII;
- mediatype = WMP_F_SERDES;
+ mediatype = WM_MEDIATYPE_SERDES;
}
out:
@@ -9184,8 +9188,8 @@
}
/* Keep the laser running on fiber adapters */
- if (((sc->sc_mediatype & WMP_F_FIBER) != 0)
- || (sc->sc_mediatype & WMP_F_SERDES) != 0) {
+ if ((sc->sc_mediatype == WM_MEDIATYPE_FIBER)
+ || (sc->sc_mediatype == WM_MEDIATYPE_SERDES)) {
reg = CSR_READ(sc, WMREG_CTRL_EXT);
reg |= CTRL_EXT_SWDPIN(3);
CSR_WRITE(sc, WMREG_CTRL_EXT, reg);
Home |
Main Index |
Thread Index |
Old Index