Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/netbsd-7]: src/sys Pull up following revision(s) (requested by bsiegert ...



details:   https://anonhg.NetBSD.org/src/rev/31faaccef754
branches:  netbsd-7
changeset: 800090:31faaccef754
user:      snj <snj%NetBSD.org@localhost>
date:      Fri Dec 23 06:33:56 2016 +0000

description:
Pull up following revision(s) (requested by bsiegert in ticket #1338):
        sys/arch/amd64/conf/GENERIC: revision 1.418
        sys/dev/pci/files.pci: revision 1.379
        sys/dev/pci/vioscsi.c: revisions 1.1-1.8
        sys/dev/pci/vioscsireg.h: revision 1.1
        sys/dev/pci/virtioreg.h: revisions 1.5, 1.6
add the common flag bits
--
Add vioscsi, compile tested only (toxic)
--
this is working now, remove debugging.
--
add vioscsi
--
kill some more debugging.
--
Fake mode sense data for illegal targets. qemu reports 256 targets...
--
fix the status return.
--
Use SCSIPI_CHAN_NOSETTLE.
--
vioscsi_req_get()/virtio_enqueue_prep() failing is actually perfectly
normal - observed failures included 10, 27, 61 in-flight commands,
so probably depends on particular command mix; return with
XS_RESOURCE_SHORTAGE rather then panic
do vioscsi_req_put() when initial bus_dmamap_load() fails, as suggested
by the XXX; the vq_done hook is called by virtio, but in that case we
never get to commit the request to it
--
react on ADAPTER_REQ_SET_XFER_MODE so that we set tagged queuing
pass tag type and set id

diffstat:

 sys/arch/amd64/conf/GENERIC |    6 +-
 sys/dev/pci/files.pci       |    8 +-
 sys/dev/pci/vioscsi.c       |  559 ++++++++++++++++++++++++++++++++++++++++++++
 sys/dev/pci/vioscsireg.h    |   72 +++++
 sys/dev/pci/virtioreg.h     |   13 +-
 5 files changed, 652 insertions(+), 6 deletions(-)

diffs (truncated from 723 to 300 lines):

diff -r 74f63c6663f1 -r 31faaccef754 sys/arch/amd64/conf/GENERIC
--- a/sys/arch/amd64/conf/GENERIC       Fri Dec 23 05:57:40 2016 +0000
+++ b/sys/arch/amd64/conf/GENERIC       Fri Dec 23 06:33:56 2016 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: GENERIC,v 1.392.2.8 2016/12/09 05:10:45 snj Exp $
+# $NetBSD: GENERIC,v 1.392.2.9 2016/12/23 06:33:56 snj Exp $
 #
 # GENERIC machine description file
 #
@@ -22,7 +22,7 @@
 
 options        INCLUDE_CONFIG_FILE     # embed config file in kernel binary
 
-#ident                 "GENERIC-$Revision: 1.392.2.8 $"
+#ident                 "GENERIC-$Revision: 1.392.2.9 $"
 
 maxusers       64              # estimated number of users
 
@@ -1188,7 +1188,7 @@
 ld*    at virtio?                      # Virtio disk device
 vioif* at virtio?                      # Virtio network device
 viornd*        at virtio?                      # Virtio entropy device
-
+vioscsi* at virtio?                    # Virtio SCSI device
 
 # Pull in optional local configuration
 cinclude "arch/amd64/conf/GENERIC.local"
diff -r 74f63c6663f1 -r 31faaccef754 sys/dev/pci/files.pci
--- a/sys/dev/pci/files.pci     Fri Dec 23 05:57:40 2016 +0000
+++ b/sys/dev/pci/files.pci     Fri Dec 23 06:33:56 2016 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: files.pci,v 1.371.4.3 2015/04/19 06:45:17 riz Exp $
+#      $NetBSD: files.pci,v 1.371.4.4 2016/12/23 06:33:56 snj Exp $
 #
 # Config file and device description for machine-independent PCI code.
 # Included by ports that need it.  Requires that the SCSI files be
@@ -1131,7 +1131,11 @@
 
 device viornd
 attach viornd at virtio
-file dev/pci/viornd.c          viornd
+file   dev/pci/viornd.c        viornd
+
+device vioscsi: scsi
+attach vioscsi at virtio
+file   dev/pci/vioscsi.c       vioscsi
 
 # Silicon Motion SM712(LynxEM+) frame buffer
 device lynxfb: wsemuldisplaydev, rasops16
diff -r 74f63c6663f1 -r 31faaccef754 sys/dev/pci/vioscsi.c
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/pci/vioscsi.c     Fri Dec 23 06:33:56 2016 +0000
@@ -0,0 +1,559 @@
+/*     $NetBSD: vioscsi.c,v 1.8.2.2 2016/12/23 06:33:56 snj Exp $      */
+/*     $OpenBSD: vioscsi.c,v 1.3 2015/03/14 03:38:49 jsg Exp $ */
+
+/*
+ * Copyright (c) 2013 Google Inc.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <sys/cdefs.h>
+__KERNEL_RCSID(0, "$NetBSD: vioscsi.c,v 1.8.2.2 2016/12/23 06:33:56 snj Exp $");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/device.h>
+#include <sys/bus.h>
+#include <sys/buf.h>
+
+#include <dev/pci/pcidevs.h>
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+
+#include <dev/pci/vioscsireg.h>
+#include <dev/pci/virtiovar.h>
+
+#include <dev/scsipi/scsi_all.h>
+#include <dev/scsipi/scsiconf.h>
+
+#ifdef VIOSCSI_DEBUG
+static int vioscsi_debug = 1;
+#define DPRINTF(f) do { if (vioscsi_debug) printf f; } while (/*CONSTCOND*/0)
+#else
+#define DPRINTF(f) ((void)0)
+#endif
+
+struct vioscsi_req {
+       struct virtio_scsi_req_hdr       vr_req;
+       struct virtio_scsi_res_hdr       vr_res;
+       struct scsipi_xfer              *vr_xs;
+       bus_dmamap_t                     vr_control;
+       bus_dmamap_t                     vr_data;
+};
+
+struct vioscsi_softc {
+       device_t                 sc_dev;
+       struct scsipi_adapter    sc_adapter;
+       struct scsipi_channel    sc_channel;
+
+       struct virtqueue         sc_vqs[3];
+       struct vioscsi_req      *sc_reqs;
+       bus_dma_segment_t        sc_reqs_segs[1];
+
+       u_int32_t                sc_seg_max;
+};
+
+/*      
+ * Each block request uses at least two segments - one for the header
+ * and one for the status.
+*/
+#define VIRTIO_SCSI_MIN_SEGMENTS 2
+
+static int      vioscsi_match(device_t, cfdata_t, void *);
+static void     vioscsi_attach(device_t, device_t, void *);
+
+static int      vioscsi_alloc_reqs(struct vioscsi_softc *,
+    struct virtio_softc *, int, uint32_t);
+static void     vioscsi_scsipi_request(struct scsipi_channel *,
+    scsipi_adapter_req_t, void *);
+static int      vioscsi_vq_done(struct virtqueue *);
+static void     vioscsi_req_done(struct vioscsi_softc *, struct virtio_softc *,
+    struct vioscsi_req *);
+static struct vioscsi_req *vioscsi_req_get(struct vioscsi_softc *);
+static void     vioscsi_req_put(struct vioscsi_softc *, struct vioscsi_req *);
+
+static const char *const vioscsi_vq_names[] = {
+       "control",
+       "event",
+       "request",
+};
+
+CFATTACH_DECL_NEW(vioscsi, sizeof(struct vioscsi_softc),
+    vioscsi_match, vioscsi_attach, NULL, NULL);
+
+static int
+vioscsi_match(device_t parent, cfdata_t match, void *aux)
+{
+       struct virtio_softc *va = aux;
+
+       if (va->sc_childdevid == PCI_PRODUCT_VIRTIO_SCSI)
+               return 1;
+       return 0;
+}
+
+static void
+vioscsi_attach(device_t parent, device_t self, void *aux)
+{
+       struct vioscsi_softc *sc = device_private(self);
+       struct virtio_softc *vsc = device_private(parent);
+       struct scsipi_adapter *adapt = &sc->sc_adapter;
+       struct scsipi_channel *chan = &sc->sc_channel;
+       uint32_t features;
+       char buf[256];
+       int rv;
+
+       if (vsc->sc_child != NULL) {
+               aprint_error(": parent %s already has a child\n",
+                   device_xname(parent));
+               return;
+       }
+
+       sc->sc_dev = self;
+
+       vsc->sc_child = self;
+       vsc->sc_ipl = IPL_BIO;
+       vsc->sc_vqs = sc->sc_vqs;
+       vsc->sc_nvqs = __arraycount(sc->sc_vqs);
+       vsc->sc_config_change = NULL;
+       vsc->sc_intrhand = virtio_vq_intr;
+       vsc->sc_flags = 0;
+
+       features = virtio_negotiate_features(vsc, 0);
+       snprintb(buf, sizeof(buf), VIRTIO_COMMON_FLAG_BITS, features);
+       aprint_normal(": Features: %s\n", buf);
+       aprint_naive("\n");
+
+       uint32_t cmd_per_lun = virtio_read_device_config_4(vsc,
+           VIRTIO_SCSI_CONFIG_CMD_PER_LUN);
+
+       uint32_t seg_max = virtio_read_device_config_4(vsc,
+           VIRTIO_SCSI_CONFIG_SEG_MAX);
+
+       uint16_t max_target = virtio_read_device_config_2(vsc,
+           VIRTIO_SCSI_CONFIG_MAX_TARGET);
+
+       uint16_t max_channel = virtio_read_device_config_2(vsc,
+           VIRTIO_SCSI_CONFIG_MAX_CHANNEL);
+
+       uint32_t max_lun = virtio_read_device_config_4(vsc,
+           VIRTIO_SCSI_CONFIG_MAX_LUN);
+
+       sc->sc_seg_max = seg_max;
+
+       for (size_t i = 0; i < __arraycount(sc->sc_vqs); i++) {
+               rv = virtio_alloc_vq(vsc, &sc->sc_vqs[i], i, MAXPHYS,
+                   1 + howmany(MAXPHYS, NBPG), vioscsi_vq_names[i]);
+               if (rv) {
+                       aprint_error_dev(sc->sc_dev,
+                           "failed to allocate virtqueue %zu\n", i);
+                       return;
+               }
+               sc->sc_vqs[i].vq_done = vioscsi_vq_done;
+       }
+
+       int qsize = sc->sc_vqs[2].vq_num;
+       aprint_normal_dev(sc->sc_dev, "qsize %d\n", qsize);
+       if (vioscsi_alloc_reqs(sc, vsc, qsize, seg_max))
+               return;
+
+       /*
+        * Fill in the scsipi_adapter.
+        */
+       memset(adapt, 0, sizeof(*adapt));
+       adapt->adapt_dev = sc->sc_dev;
+       adapt->adapt_nchannels = max_channel;
+       adapt->adapt_openings = cmd_per_lun;
+       adapt->adapt_max_periph = adapt->adapt_openings;
+       adapt->adapt_request = vioscsi_scsipi_request;
+       adapt->adapt_minphys = minphys;
+
+       /*
+        * Fill in the scsipi_channel.
+        */
+       memset(chan, 0, sizeof(*chan));
+       chan->chan_adapter = adapt;
+       chan->chan_bustype = &scsi_bustype;
+       chan->chan_channel = 0;
+       chan->chan_ntargets = max_target;
+       chan->chan_nluns = max_lun;
+       chan->chan_id = 0;
+       chan->chan_flags = SCSIPI_CHAN_NOSETTLE;
+
+       config_found(sc->sc_dev, &sc->sc_channel, scsiprint);
+}
+
+#define XS2DMA(xs) \
+    ((((xs)->xs_control & XS_CTL_DATA_IN) ? BUS_DMA_READ : BUS_DMA_WRITE) | \
+    (((xs)->xs_control & XS_CTL_NOSLEEP) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK) | \
+    BUS_DMA_STREAMING)
+
+#define XS2DMAPRE(xs) (((xs)->xs_control & XS_CTL_DATA_IN) ? \
+    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE)
+
+#define XS2DMAPOST(xs) (((xs)->xs_control & XS_CTL_DATA_IN) ? \
+    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE)
+
+static void
+vioscsi_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t
+    request, void *arg)
+{
+       struct vioscsi_softc *sc =
+           device_private(chan->chan_adapter->adapt_dev);
+       struct virtio_softc *vsc = device_private(device_parent(sc->sc_dev));
+       struct scsipi_xfer *xs; 
+       struct scsipi_periph *periph;
+       struct vioscsi_req *vr;
+       struct virtio_scsi_req_hdr *req;
+       struct virtqueue *vq = &sc->sc_vqs[2];
+       int slot, error;
+
+       DPRINTF(("%s: enter\n", __func__));
+
+       switch (request) {
+       case ADAPTER_REQ_RUN_XFER:
+               break;
+       case ADAPTER_REQ_SET_XFER_MODE:
+       {
+               struct scsipi_xfer_mode *xm = arg;
+               xm->xm_mode = PERIPH_CAP_TQING;
+               xm->xm_period = 0;
+               xm->xm_offset = 0;
+               scsipi_async_event(chan, ASYNC_EVENT_XFER_MODE, xm);
+               return;
+       }
+       default:
+               DPRINTF(("%s: unhandled %d\n", __func__, request));
+               return;
+       }
+       
+       xs = arg;
+       periph = xs->xs_periph;
+
+       vr = vioscsi_req_get(sc);
+       /*
+        * This can happen when we run out of queue slots.
+        */
+       if (vr == NULL) {
+               xs->error = XS_RESOURCE_SHORTAGE;



Home | Main Index | Thread Index | Old Index