Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/mii No functional change:
details: https://anonhg.NetBSD.org/src/rev/4e3afc77942e
branches: trunk
changeset: 796753:4e3afc77942e
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Mon Jun 16 14:43:22 2014 +0000
description:
No functional change:
- Fix typo.
- Remove trailing white spaces.
- Capitalize comments.
- Tabify.
- KNF.
diffstat:
sys/dev/mii/bmtphy.c | 13 ++++++-------
sys/dev/mii/brgphyreg.h | 36 ++++++++++++++++++------------------
sys/dev/mii/ciphyreg.h | 10 +++++-----
sys/dev/mii/gentbi.c | 8 ++++----
sys/dev/mii/mii.h | 6 +++---
sys/dev/mii/nsphy.c | 6 +++---
sys/dev/mii/rlphy.c | 6 +++---
sys/dev/mii/ukphy_subr.c | 6 +++---
8 files changed, 45 insertions(+), 46 deletions(-)
diffs (truncated from 331 to 300 lines):
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/bmtphy.c
--- a/sys/dev/mii/bmtphy.c Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/bmtphy.c Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: bmtphy.c,v 1.30 2009/10/19 18:41:13 bouyer Exp $ */
+/* $NetBSD: bmtphy.c,v 1.31 2014/06/16 14:43:22 msaitoh Exp $ */
/*-
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
@@ -61,7 +61,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: bmtphy.c,v 1.30 2009/10/19 18:41:13 bouyer Exp $");
+__KERNEL_RCSID(0, "$NetBSD: bmtphy.c,v 1.31 2014/06/16 14:43:22 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -247,7 +247,7 @@
if (bmcr & BMCR_AUTOEN) {
/*
- * The media status bits are only valid of autonegotiation
+ * The media status bits are only valid if autonegotiation
* has completed (or it's disabled).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
@@ -272,7 +272,7 @@
mii->mii_media_active = ife->ifm_media;
}
-static void
+static void
bmtphy_reset(struct mii_softc *sc)
{
u_int16_t data;
@@ -288,8 +288,7 @@
data = PHY_READ(sc, MII_BMTPHY_AUX2);
PHY_WRITE(sc, MII_BMTPHY_AUX2, data | 0x0020);
- /* Enable clocks across APD for
- * Auto-MDIX functionality */
+ /* Enable clocks across APD for Auto-MDIX functionality */
data = PHY_READ(sc, MII_BMTPHY_INTR);
PHY_WRITE(sc, MII_BMTPHY_INTR, data | 0x0004);
@@ -297,4 +296,4 @@
data = PHY_READ(sc, 0x1f);
PHY_WRITE(sc, 0x1f, data & ~0x0080);
}
-}
+}
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/brgphyreg.h
--- a/sys/dev/mii/brgphyreg.h Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/brgphyreg.h Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: brgphyreg.h,v 1.7 2014/06/12 12:09:47 msaitoh Exp $ */
+/* $NetBSD: brgphyreg.h,v 1.8 2014/06/16 14:43:22 msaitoh Exp $ */
/*
* Copyright (c) 2000
@@ -52,7 +52,7 @@
#define BRGPHY_MII_PHY_EXTCTL 0x10 /* PHY extended control */
#define BRGPHY_PHY_EXTCTL_MAC_PHY 0x8000 /* 10BIT/GMI-interface */
#define BRGPHY_PHY_EXTCTL_DIS_CROSS 0x4000 /* Disable MDI crossover */
-#define BRGPHY_PHY_EXTCTL_TX_DIS 0x2000 /* Tx output disable d*/
+#define BRGPHY_PHY_EXTCTL_TX_DIS 0x2000 /* Tx output disabled */
#define BRGPHY_PHY_EXTCTL_INT_DIS 0x1000 /* Interrupts disabled */
#define BRGPHY_PHY_EXTCTL_F_INT 0x0800 /* Force interrupt */
#define BRGPHY_PHY_EXTCTL_BY_45 0x0400 /* Bypass 4B5B-Decoder */
@@ -85,7 +85,7 @@
#define BRGPHY_MII_RXERRCNT 0x12 /* RX error counter */
-#define BRGPHY_MII_FCERRCNT 0x13 /* false carrier sense counter */
+#define BRGPHY_MII_FCERRCNT 0x13 /* False carrier sense counter */
#define BGRPHY_FCERRCNT 0x00FF /* False carrier counter */
#define BRGPHY_MII_RXNOCNT 0x14 /* RX not OK counter */
@@ -140,14 +140,14 @@
#define BRGPHY_AUXCTL_DIAG_MODE 0x0004 /* Diagnostic mode */
#define BRGPHY_MII_AUXSTS 0x19 /* AUX status */
-#define BRGPHY_AUXSTS_ACOMP 0x8000 /* autoneg complete */
-#define BRGPHY_AUXSTS_AN_ACK 0x4000 /* autoneg complete ack */
-#define BRGPHY_AUXSTS_AN_ACK_D 0x2000 /* autoneg complete ack detect */
-#define BRGPHY_AUXSTS_AN_NPW 0x1000 /* autoneg next page wait */
-#define BRGPHY_AUXSTS_AN_RES 0x0700 /* AN HDC */
+#define BRGPHY_AUXSTS_ACOMP 0x8000 /* Autoneg complete */
+#define BRGPHY_AUXSTS_AN_ACK 0x4000 /* Autoneg complete ack */
+#define BRGPHY_AUXSTS_AN_ACK_D 0x2000 /* Autoneg complete ack detect */
+#define BRGPHY_AUXSTS_AN_NPW 0x1000 /* Autoneg next page wait */
+#define BRGPHY_AUXSTS_AN_RES 0x0700 /* Autoneg HCD */
#define BRGPHY_AUXSTS_PDF 0x0080 /* Parallel detect. fault */
-#define BRGPHY_AUXSTS_RF 0x0040 /* remote fault */
-#define BRGPHY_AUXSTS_ANP_R 0x0020 /* AN page received */
+#define BRGPHY_AUXSTS_RF 0x0040 /* Remote fault */
+#define BRGPHY_AUXSTS_ANP_R 0x0020 /* Autoneg page received */
#define BRGPHY_AUXSTS_LP_ANAB 0x0010 /* LP AN ability */
#define BRGPHY_AUXSTS_LP_NPAB 0x0008 /* LP Next page ability */
#define BRGPHY_AUXSTS_LINK 0x0004 /* Link status */
@@ -162,11 +162,11 @@
#define BRGPHY_RES_10FD 0x0200 /* 10baseT full duplex */
#define BRGPHY_RES_10HD 0x0100 /* 10baseT half duplex */
-#define BRGPHY_MII_ISR 0x1A /* interrupt status */
+#define BRGPHY_MII_ISR 0x1A /* Interrupt status */
#define BRGPHY_ISR_PSERR 0x4000 /* Pair swap error */
#define BRGPHY_ISR_MDXI_SC 0x2000 /* MDIX Status Change */
-#define BRGPHY_ISR_HCT 0x1000 /* counter above 32K */
-#define BRGPHY_ISR_LCT 0x0800 /* all counter below 128 */
+#define BRGPHY_ISR_HCT 0x1000 /* Counter above 32K */
+#define BRGPHY_ISR_LCT 0x0800 /* All counter below 128 */
#define BRGPHY_ISR_AN_PR 0x0400 /* Autoneg page received */
#define BRGPHY_ISR_NO_HDCL 0x0200 /* No HCD Link */
#define BRGPHY_ISR_NO_HDC 0x0100 /* No HCD */
@@ -177,13 +177,13 @@
#define BRGPHY_ISR_DUP_CHG 0x0008 /* Duplex mode change */
#define BRGPHY_ISR_LSP_CHG 0x0004 /* Link speed changed */
#define BRGPHY_ISR_LNK_CHG 0x0002 /* Link status change */
-#define BRGPHY_ISR_CRCERR 0x0001 /* CEC error */
+#define BRGPHY_ISR_CRCERR 0x0001 /* CRC error */
-#define BRGPHY_MII_IMR 0x1B /* interrupt mask */
+#define BRGPHY_MII_IMR 0x1B /* Interrupt mask */
#define BRGPHY_IMR_PSERR 0x4000 /* Pair swap error */
#define BRGPHY_IMR_MDXI_SC 0x2000 /* MDIX Status Change */
-#define BRGPHY_IMR_HCT 0x1000 /* counter above 32K */
-#define BRGPHY_IMR_LCT 0x0800 /* all counter below 128 */
+#define BRGPHY_IMR_HCT 0x1000 /* Counter above 32K */
+#define BRGPHY_IMR_LCT 0x0800 /* All counter below 128 */
#define BRGPHY_IMR_AN_PR 0x0400 /* Autoneg page received */
#define BRGPHY_IMR_NO_HDCL 0x0200 /* No HCD Link */
#define BRGPHY_IMR_NO_HDC 0x0100 /* No HCD */
@@ -194,7 +194,7 @@
#define BRGPHY_IMR_DUP_CHG 0x0008 /* Duplex mode change */
#define BRGPHY_IMR_LSP_CHG 0x0004 /* Link speed changed */
#define BRGPHY_IMR_LNK_CHG 0x0002 /* Link status change */
-#define BRGPHY_IMR_CRCERR 0x0001 /* CEC error */
+#define BRGPHY_IMR_CRCERR 0x0001 /* CRC error */
/*******************************************************/
/* Begin: PHY register values for the 5706 PHY */
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/ciphyreg.h
--- a/sys/dev/mii/ciphyreg.h Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/ciphyreg.h Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: ciphyreg.h,v 1.4 2006/03/12 22:41:41 chs Exp $ */
+/* $NetBSD: ciphyreg.h,v 1.5 2014/06/16 14:43:22 msaitoh Exp $ */
/*-
* Copyright (c) 2004
@@ -172,7 +172,7 @@
/* Vendor-specific PHY registers */
-/* 100baseTX status extention register */
+/* 100baseTX status extension register */
#define CIPHY_MII_100STS 0x10
#define CIPHY_100STS_DESLCK 0x8000 /* descrambler locked */
#define CIPHY_100STS_LKCERR 0x4000 /* lock error detected/lock lost */
@@ -183,7 +183,7 @@
#define CIPHY_100STS_SSDERR 0x0200 /* false carrier error detected */
#define CIPHY_100STS_ESDERR 0x0100 /* premature end of stream error */
-/* 1000BT status extention register #2 */
+/* 1000BT status extension register #2 */
#define CIPHY_MII_1000STS2 0x11
#define CIPHY_1000STS2_DESLCK 0x8000 /* descrambler locked */
#define CIPHY_1000STS2_LKCERR 0x4000 /* lock error detected/lock lost */
@@ -193,7 +193,7 @@
#define CIPHY_1000STS2_TXERR 0x0400 /* transmit error detected */
#define CIPHY_1000STS2_SSDERR 0x0200 /* false carrier error detected */
#define CIPHY_1000STS2_ESDERR 0x0100 /* premature end of stream error */
-#define CIPHY_1000STS2_CARREXT 0x0080 /* carrier extention err detected */
+#define CIPHY_1000STS2_CARREXT 0x0080 /* carrier extension err detected */
#define CIPHY_1000STS2_BCM5400 0x0040 /* non-complient BCM5400 detected */
/* Bypass control register */
@@ -334,7 +334,7 @@
#define CIPHY_LED_LINKACTBLINK 0x0004 /* enable link/activity LED blink */
#define CIPHY_LED_BLINKRATE 0x0002 /* blink rate 0=10hz, 1=5hz */
-/* Auxilliary control and status register */
+/* Auxiliary control and status register */
#define CIPHY_MII_AUXCSR 0x1C
#define CIPHY_AUXCSR_ANEGDONE 0x8000 /* Autoneg complete */
#define CIPHY_AUXCSR_ANEGOFF 0x4000 /* Autoneg disabled */
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/gentbi.c
--- a/sys/dev/mii/gentbi.c Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/gentbi.c Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: gentbi.c,v 1.25 2014/06/11 22:34:26 msaitoh Exp $ */
+/* $NetBSD: gentbi.c,v 1.26 2014/06/16 14:43:22 msaitoh Exp $ */
/*-
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
@@ -55,14 +55,14 @@
*/
/*
- * Driver for generic ten-bit (1000BASE-SX) interfaces, built in to
+ * Driver for generic ten-bit (1000BASE-SX) interfaces, built into
* many Gigabit Ethernet chips.
*
* All we have to do here is correctly report speed and duplex.
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: gentbi.c,v 1.25 2014/06/11 22:34:26 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: gentbi.c,v 1.26 2014/06/16 14:43:22 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -261,7 +261,7 @@
if (bmcr & BMCR_AUTOEN) {
/*
- * The media status bits are only valid of autonegotiation
+ * The media status bits are only valid if autonegotiation
* has completed (or it's disabled).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/mii.h
--- a/sys/dev/mii/mii.h Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/mii.h Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: mii.h,v 1.17 2013/06/16 06:29:08 msaitoh Exp $ */
+/* $NetBSD: mii.h,v 1.18 2014/06/16 14:43:22 msaitoh Exp $ */
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
@@ -45,7 +45,7 @@
#define MII_COMMAND_WRITE 0x01
#define MII_COMMAND_ACK 0x02
-#define MII_BMCR 0x00 /* Basic mode control register (rw) */
+#define MII_BMCR 0x00 /* Basic mode control register (rw) */
#define BMCR_RESET 0x8000 /* reset */
#define BMCR_LOOP 0x4000 /* loopback */
#define BMCR_SPEED0 0x2000 /* speed selection (LSB) */
@@ -83,7 +83,7 @@
/*
* Note that the EXTSTAT bit indicates that there is extended status
* info available in register 15, but 802.3 section 22.2.4.3 also
- * states that that all 1000 Mb/s capable PHYs will set this bit to 1.
+ * states that all 1000 Mb/s capable PHYs will set this bit to 1.
*/
#define BMSR_MEDIAMASK (BMSR_100T4|BMSR_100TXFDX|BMSR_100TXHDX| \
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/nsphy.c
--- a/sys/dev/mii/nsphy.c Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/nsphy.c Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: nsphy.c,v 1.57 2009/10/19 18:41:14 bouyer Exp $ */
+/* $NetBSD: nsphy.c,v 1.58 2014/06/16 14:43:22 msaitoh Exp $ */
/*-
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
@@ -60,7 +60,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: nsphy.c,v 1.57 2009/10/19 18:41:14 bouyer Exp $");
+__KERNEL_RCSID(0, "$NetBSD: nsphy.c,v 1.58 2014/06/16 14:43:22 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -264,7 +264,7 @@
if (bmcr & BMCR_AUTOEN) {
/*
- * The PAR status bits are only valid of autonegotiation
+ * The PAR status bits are only valid if autonegotiation
* has completed (or it's disabled).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
diff -r 914bd3d8be90 -r 4e3afc77942e sys/dev/mii/rlphy.c
--- a/sys/dev/mii/rlphy.c Mon Jun 16 12:54:42 2014 +0000
+++ b/sys/dev/mii/rlphy.c Mon Jun 16 14:43:22 2014 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: rlphy.c,v 1.27 2011/01/20 14:26:11 pooka Exp $ */
+/* $NetBSD: rlphy.c,v 1.28 2014/06/16 14:43:22 msaitoh Exp $ */
/* $OpenBSD: rlphy.c,v 1.20 2005/07/31 05:27:30 pvalchev Exp $ */
/*
@@ -38,7 +38,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: rlphy.c,v 1.27 2011/01/20 14:26:11 pooka Exp $");
+__KERNEL_RCSID(0, "$NetBSD: rlphy.c,v 1.28 2014/06/16 14:43:22 msaitoh Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -261,7 +261,7 @@
/*
* If the other side doesn't support NWAY, then the
* best we can do is determine if we have a 10Mbps or
- * 100Mbps link. There's no way to know if the link
Home |
Main Index |
Thread Index |
Old Index