Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-8]: src/sys/dev/scsipi Pull up following revision(s) (requested b...
details: https://anonhg.NetBSD.org/src/rev/3fbd31632963
branches: netbsd-8
changeset: 851574:3fbd31632963
user: snj <snj%NetBSD.org@localhost>
date: Sun Apr 08 06:11:41 2018 +0000
description:
Pull up following revision(s) (requested by mlelstv in ticket #703):
sys/dev/scsipi/st.c: 1.234
sys/dev/scsipi/stvar.h: 1.26
Use separate lock to protect internal state and release locks when
calling biodone.
diffstat:
sys/dev/scsipi/st.c | 316 +++++++++++++++++++++++++++---------------------
sys/dev/scsipi/stvar.h | 5 +-
2 files changed, 183 insertions(+), 138 deletions(-)
diffs (truncated from 463 to 300 lines):
diff -r 4b853d5cfe99 -r 3fbd31632963 sys/dev/scsipi/st.c
--- a/sys/dev/scsipi/st.c Sun Apr 08 06:10:24 2018 +0000
+++ b/sys/dev/scsipi/st.c Sun Apr 08 06:11:41 2018 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: st.c,v 1.230.8.1 2017/06/21 18:18:55 snj Exp $ */
+/* $NetBSD: st.c,v 1.230.8.2 2018/04/08 06:11:41 snj Exp $ */
/*-
* Copyright (c) 1998, 2004 The NetBSD Foundation, Inc.
@@ -50,7 +50,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: st.c,v 1.230.8.1 2017/06/21 18:18:55 snj Exp $");
+__KERNEL_RCSID(0, "$NetBSD: st.c,v 1.230.8.2 2018/04/08 06:11:41 snj Exp $");
#ifdef _KERNEL_OPT
#include "opt_scsi.h"
@@ -343,6 +343,7 @@
static void st_unmount(struct st_softc *, boolean);
static int st_decide_mode(struct st_softc *, boolean);
static void ststart(struct scsipi_periph *);
+static int ststart1(struct scsipi_periph *, struct buf *);
static void strestart(void *);
static void stdone(struct scsipi_xfer *, int);
static int st_read(struct st_softc *, char *, int, int);
@@ -392,9 +393,11 @@
/* Set initial flags */
st->flags = ST_INIT_FLAGS;
- /* Set up the buf queue for this device */
+ /* Set up the buf queues for this device */
bufq_alloc(&st->buf_queue, "fcfs", 0);
+ bufq_alloc(&st->buf_defer, "fcfs", 0);
callout_init(&st->sc_callout, 0);
+ mutex_init(&st->sc_iolock, MUTEX_DEFAULT, IPL_VM);
/*
* Check if the drive is a known criminal and take
@@ -445,6 +448,7 @@
mutex_enter(chan_mtx(chan));
/* Kill off any queued buffers. */
+ bufq_drain(st->buf_defer);
bufq_drain(st->buf_queue);
/* Kill off any pending commands. */
@@ -452,7 +456,9 @@
mutex_exit(chan_mtx(chan));
+ bufq_free(st->buf_defer);
bufq_free(st->buf_queue);
+ mutex_destroy(&st->sc_iolock);
/* Nuke the vnodes for any open instances */
mn = STUNIT(device_unit(self));
@@ -609,6 +615,8 @@
*/
if ((st->flags & ST_MOUNTED) || ST_MOUNT_DELAY == 0 ||
(st->mt_key != SKEY_NOT_READY)) {
+ device_printf(st->sc_dev, "mount error (key=%d)\n",
+ st->mt_key);
goto bad;
}
@@ -629,11 +637,11 @@
periph->periph_flags = oflags; /* restore flags */
if (slpintr != 0 && slpintr != EWOULDBLOCK) {
+ device_printf(st->sc_dev, "load interrupted\n");
goto bad;
}
}
-
/*
* If the mode is 3 (e.g. minor = 3,7,11,15) then the device has
* been opened to set defaults and perform other, usually non-I/O
@@ -642,7 +650,9 @@
* as to whether or not we got a NOT READY for the above
* unit attention). If a tape is there, go do a mount sequence.
*/
- if (stmode == CTRL_MODE && st->mt_key == SKEY_NOT_READY) {
+ if (stmode == CTRL_MODE &&
+ st->mt_key != SKEY_NO_SENSE &&
+ st->mt_key != SKEY_UNIT_ATTENTION) {
periph->periph_flags |= PERIPH_OPEN;
return 0;
}
@@ -1107,160 +1117,187 @@
/*
* ststart looks to see if there is a buf waiting for the device
- * and that the device is not already busy. If both are true,
- * It dequeues the buf and creates a scsi command to perform the
- * transfer required. The transfer request will call scsipi_done
- * on completion, which will in turn call this routine again
- * so that the next queued transfer is performed.
- * The bufs are queued by the strategy routine (ststrategy)
+ * and that the device is not already busy. If the device is busy,
+ * the request is deferred and retried on the next attempt.
+ * If both are true, ststart creates a scsi command to perform
+ * the transfer required.
+ *
+ * The transfer request will call scsipi_done on completion,
+ * which will in turn call this routine again so that the next
+ * queued transfer is performed. The bufs are queued by the
+ * strategy routine (ststrategy)
*
* This routine is also called after other non-queued requests
* have been made of the scsi driver, to ensure that the queue
* continues to be drained.
* ststart() is called with channel lock held
*/
+static int
+ststart1(struct scsipi_periph *periph, struct buf *bp)
+{
+ struct st_softc *st = device_private(periph->periph_dev);
+ struct scsipi_channel *chan = periph->periph_channel;
+ struct scsi_rw_tape cmd;
+ struct scsipi_xfer *xs;
+ int flags, error;
+
+ SC_DEBUG(periph, SCSIPI_DB2, ("ststart1 "));
+
+ mutex_enter(chan_mtx(chan));
+
+ if (periph->periph_active >= periph->periph_openings) {
+ error = EAGAIN;
+ goto out;
+ }
+
+ /* if a special awaits, let it proceed first */
+ if (periph->periph_flags & PERIPH_WAITING) {
+ periph->periph_flags &= ~PERIPH_WAITING;
+ cv_broadcast(periph_cv_periph(periph));
+ error = EAGAIN;
+ goto out;
+ }
+
+ /*
+ * If the device has been unmounted by the user
+ * then throw away all requests until done.
+ */
+ if (__predict_false((st->flags & ST_MOUNTED) == 0 ||
+ (periph->periph_flags & PERIPH_MEDIA_LOADED) == 0)) {
+ error = EIO;
+ goto out;
+ }
+
+ /*
+ * only FIXEDBLOCK devices have pending I/O or space operations.
+ */
+ if (st->flags & ST_FIXEDBLOCKS) {
+ /*
+ * If we are at a filemark but have not reported it yet
+ * then we should report it now
+ */
+ if (st->flags & ST_AT_FILEMARK) {
+ if ((bp->b_flags & B_READ) == B_WRITE) {
+ /*
+ * Handling of ST_AT_FILEMARK in
+ * st_space will fill in the right file
+ * mark count.
+ * Back up over filemark
+ */
+ if (st_space(st, 0, SP_FILEMARKS, 0)) {
+ error = EIO;
+ goto out;
+ }
+ } else {
+ bp->b_resid = bp->b_bcount;
+ error = 0;
+ st->flags &= ~ST_AT_FILEMARK;
+ goto out;
+ }
+ }
+ }
+ /*
+ * If we are at EOM but have not reported it
+ * yet then we should report it now.
+ */
+ if (st->flags & (ST_EOM_PENDING|ST_EIO_PENDING)) {
+ error = EIO;
+ goto out;
+ }
+
+ /* Fill out the scsi command */
+ memset(&cmd, 0, sizeof(cmd));
+ flags = XS_CTL_NOSLEEP | XS_CTL_ASYNC;
+ if ((bp->b_flags & B_READ) == B_WRITE) {
+ cmd.opcode = WRITE;
+ st->flags &= ~ST_FM_WRITTEN;
+ flags |= XS_CTL_DATA_OUT;
+ } else {
+ cmd.opcode = READ;
+ flags |= XS_CTL_DATA_IN;
+ }
+
+ /*
+ * Handle "fixed-block-mode" tape drives by using the
+ * block count instead of the length.
+ */
+ if (st->flags & ST_FIXEDBLOCKS) {
+ cmd.byte2 |= SRW_FIXED;
+ _lto3b(bp->b_bcount / st->blksize, cmd.len);
+ } else
+ _lto3b(bp->b_bcount, cmd.len);
+
+ /* Clear 'position updated' indicator */
+ st->flags &= ~ST_POSUPDATED;
+
+ /* go ask the adapter to do all this for us */
+ xs = scsipi_make_xs_locked(periph,
+ (struct scsipi_generic *)&cmd, sizeof(cmd),
+ (u_char *)bp->b_data, bp->b_bcount,
+ 0, ST_IO_TIME, bp, flags);
+ if (__predict_false(xs == NULL)) {
+ /*
+ * out of memory. Keep this buffer in the queue, and
+ * retry later.
+ */
+ callout_reset(&st->sc_callout, hz / 2, strestart,
+ periph);
+ error = EAGAIN;
+ goto out;
+ }
+
+ error = scsipi_execute_xs(xs);
+ /* with a scsipi_xfer preallocated, scsipi_command can't fail */
+ KASSERT(error == 0);
+
+out:
+ mutex_exit(chan_mtx(chan));
+
+ return error;
+}
+
static void
ststart(struct scsipi_periph *periph)
{
struct st_softc *st = device_private(periph->periph_dev);
+ struct scsipi_channel *chan = periph->periph_channel;
struct buf *bp;
- struct scsi_rw_tape cmd;
- struct scsipi_xfer *xs;
- int flags, error __diagused;
+ int error;
SC_DEBUG(periph, SCSIPI_DB2, ("ststart "));
- /* See if there is a buf to do and we are not already doing one */
- while (periph->periph_active < periph->periph_openings) {
- /* if a special awaits, let it proceed first */
- if (periph->periph_flags & PERIPH_WAITING) {
- periph->periph_flags &= ~PERIPH_WAITING;
- cv_broadcast(periph_cv_periph(periph));
- return;
- }
- /*
- * If the device has been unmounted by the user
- * then throw away all requests until done.
- */
- if (__predict_false((st->flags & ST_MOUNTED) == 0 ||
- (periph->periph_flags & PERIPH_MEDIA_LOADED) == 0)) {
- if ((bp = bufq_get(st->buf_queue)) != NULL) {
- /* make sure that one implies the other.. */
- periph->periph_flags &= ~PERIPH_MEDIA_LOADED;
- bp->b_error = EIO;
- bp->b_resid = bp->b_bcount;
- biodone(bp);
- continue;
- } else
- return;
- }
+ mutex_exit(chan_mtx(chan));
+ mutex_enter(&st->sc_iolock);
- if ((bp = bufq_peek(st->buf_queue)) == NULL)
- return;
+ while ((bp = bufq_get(st->buf_defer)) != NULL
+ || (bp = bufq_get(st->buf_queue)) != NULL) {
iostat_busy(st->stats);
+ mutex_exit(&st->sc_iolock);
- /*
- * only FIXEDBLOCK devices have pending I/O or space operations.
- */
- if (st->flags & ST_FIXEDBLOCKS) {
- /*
- * If we are at a filemark but have not reported it yet
- * then we should report it now
- */
- if (st->flags & ST_AT_FILEMARK) {
- if ((bp->b_flags & B_READ) == B_WRITE) {
- /*
- * Handling of ST_AT_FILEMARK in
- * st_space will fill in the right file
Home |
Main Index |
Thread Index |
Old Index