[src/trunk]: src/sys/dev/mii - Add some bit definitions:

[msaitoh <msaitoh%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/7b83acea6b61
branches:  trunk
changeset: 824494:7b83acea6b61
user:      msaitoh <msaitoh%NetBSD.org@localhost>
date:      Wed Jun 07 03:21:31 2017 +0000

description:
- Add some bit definitions:
   - Unidirectional enable
   - Unidirectional ability
   - Extended Next Page
   - Receive Next Page Location Able
   - Received Next Page Storage Location
   - Data Link Layer Classification capability
   - Enable Physical Layer Classification
   - Invalid Class in PD Class
   - PSE Status bit definitions
- Sort registers
- Modify comments.

diffstat:

 sys/dev/mii/mii.h |  22 ++++++++++++++++++----
 1 files changed, 18 insertions(+), 4 deletions(-)

diffs (92 lines):

diff -r a0cafdafb770 -r 7b83acea6b61 sys/dev/mii/mii.h
--- a/sys/dev/mii/mii.h Wed Jun 07 03:08:44 2017 +0000
+++ b/sys/dev/mii/mii.h Wed Jun 07 03:21:31 2017 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: mii.h,v 1.21 2017/06/07 03:08:44 msaitoh Exp $ */
+/*     $NetBSD: mii.h,v 1.22 2017/06/07 03:21:31 msaitoh Exp $ */
 
 /*
  * Copyright (c) 1997 Manuel Bouyer.  All rights reserved.
@@ -58,6 +58,7 @@
 #define        BMCR_FDX        0x0100  /* Set duplex mode */
 #define        BMCR_CTEST      0x0080  /* collision test */
 #define        BMCR_SPEED1     0x0040  /* speed selection (MSB) */
+#define        BMCR_UNIDIR     0x0020  /* Unidirectional enable */
 
 #define        BMCR_S10        0x0000          /* 10 Mb/s */
 #define        BMCR_S100       BMCR_SPEED0     /* 100 Mb/s */
@@ -74,6 +75,7 @@
 #define        BMSR_100T2FDX   0x0400  /* 100 base T2 full duplex capable */
 #define        BMSR_100T2HDX   0x0200  /* 100 base T2 half duplex capable */
 #define        BMSR_EXTSTAT    0x0100  /* Extended status in register 15 */
+#define        BMSR_UNIDIR     0x0080  /* Unidirectional ability */
 #define        BMSR_MFPS       0x0040  /* MII Frame Preamble Suppression */
 #define        BMSR_ACOMP      0x0020  /* Autonegotiation complete */
 #define        BMSR_RFAULT     0x0010  /* Link partner fault */
@@ -109,6 +111,7 @@
 #define ANAR_NP                0x8000  /* Next page (ro) */
 #define        ANAR_ACK        0x4000  /* link partner abilities acknowledged (ro) */
 #define ANAR_RF                0x2000  /* remote fault (ro) */
+#define ANAR_ENP       0x1000  /* Extended Next Page */
                /* Annex 28B.2 */
 #define        ANAR_FC         0x0400  /* local device supports PAUSE */
 #define ANAR_T4                0x0200  /* local device supports 100bT4 */
@@ -130,7 +133,7 @@
 #define        ANAR_X_PAUSE_ASYM       (2 << 7)
 #define        ANAR_X_PAUSE_TOWARDS    (3 << 7)
 
-#define        MII_ANLPAR      0x05    /* Autonegotiation link partner abilities (rw) */
+#define        MII_ANLPAR      0x05    /* ANEG Link Partner Base Page abilities (rw)*/
                /* section 28.2.4.1 and 37.2.6.1 */
 #define ANLPAR_NP      0x8000  /* Next page (ro) */
 #define        ANLPAR_ACK      0x4000  /* link partner accepted ACK (ro) */
@@ -158,13 +161,15 @@
 
 #define        MII_ANER        0x06    /* Autonegotiation expansion (ro) */
                /* section 28.2.4.1 and 37.2.6.1 */
+#define ANER_RNPLA     0x0040  /* Receive Next Page Location Able */
+#define ANER_RNPSL     0x0020  /* Received Next Page Storage Location */
 #define ANER_MLF       0x0010  /* multiple link detection fault */
 #define ANER_LPNP      0x0008  /* link partner next page-able */
 #define ANER_NP                0x0004  /* next page-able */
 #define ANER_PAGE_RX   0x0002  /* Page received */
 #define ANER_LPAN      0x0001  /* link partner autoneg-able */
 
-#define        MII_ANNP        0x07    /* Autonegotiation next page */
+#define        MII_ANNP        0x07    /* Autonegotiation next page (rw) */
                /* section 28.2.4.1 and 37.2.6.1 */
 
 #define        MII_ANLPRNP     0x08    /* Autonegotiation link partner rx next page */
@@ -191,10 +196,12 @@
 #define        GTSR_IDLE_ERR   0x00ff  /* IDLE error count */
 
 #define        MII_PSECR       0x0b    /* PSE control register */
+#define        PSECR_DLLC      0x0020  /* Data Link Layer Classification capability */
+#define        PSECR_EPLC      0x0010  /* Enable Physical Layer Classification */
 #define        PSECR_PACTLMASK 0x000c  /* pair control mask */
-#define        PSECR_PSEENMASK 0x0003  /* PSE enable mask */
 #define        PSECR_PINOUTB   0x0008  /* PSE pinout Alternative B */
 #define        PSECR_PINOUTA   0x0004  /* PSE pinout Alternative A */
+#define        PSECR_PSEENMASK 0x0003  /* PSE enable mask */
 #define        PSECR_FOPOWTST  0x0002  /* Force Power Test Mode */
 #define        PSECR_PSEEN     0x0001  /* PSE Enabled */
 #define        PSECR_PSEDIS    0x0000  /* PSE Disabled */
@@ -209,11 +216,18 @@
 #define        PSESR_PDCLMASK  0x0070  /* PD Class mask */
 #define        PSESR_STATMASK  0x000e  /* PSE Status mask */
 #define        PSESR_PAIRCTABL 0x0001  /* PAIR Control Ability */
+#define        PSESR_PDCL_INVALID      (5 << 4)        /* Invalid Class */
 #define        PSESR_PDCL_4            (4 << 4)        /* Class 4 */
 #define        PSESR_PDCL_3            (3 << 4)        /* Class 3 */
 #define        PSESR_PDCL_2            (2 << 4)        /* Class 2 */
 #define        PSESR_PDCL_1            (1 << 4)        /* Class 1 */
 #define        PSESR_PDCL_0            (0 << 4)        /* Class 0 */
+#define        PSESR_STAT_ISFLT        (5 << 1)        /* Implement specific fault */
+#define        PSESR_STAT_TSTERR       (4 << 1)        /* Test Error */
+#define        PSESR_STAT_TSTMODE      (3 << 1)        /* Test Mode */
+#define        PSESR_STAT_DELVPWR      (2 << 1)        /* Delivering power */
+#define        PSESR_STAT_SEARCH       (1 << 1)        /* Searching */
+#define        PSESR_STAT_DIS          (0 << 1)        /* Disabled */
 
 #define        MII_MMDACR      0x0d    /* MMD access control register */
 #define        MMDACR_FUNCMASK 0xc000  /* function */