Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-7]: src/sys/arch/arm/arm32 Pull up following revision(s) (request...
details: https://anonhg.NetBSD.org/src/rev/1e608f175805
branches: netbsd-7
changeset: 799156:1e608f175805
user: martin <martin%NetBSD.org@localhost>
date: Fri Mar 27 11:27:39 2015 +0000
description:
Pull up following revision(s) (requested by skrll in ticket #646):
sys/arch/arm/arm32/genassym.cf: revision 1.70
sys/arch/arm/arm32/cpuswitch.S: revision 1.86-1.89
Only set vfp & tpid registers and do ras lookups if new
lwp is not LW_SYSTEM.
diffstat:
sys/arch/arm/arm32/cpuswitch.S | 112 ++++++++++++++++++++++------------------
sys/arch/arm/arm32/genassym.cf | 5 +-
2 files changed, 65 insertions(+), 52 deletions(-)
diffs (265 lines):
diff -r 7925d059bbc7 -r 1e608f175805 sys/arch/arm/arm32/cpuswitch.S
--- a/sys/arch/arm/arm32/cpuswitch.S Thu Mar 26 16:15:38 2015 +0000
+++ b/sys/arch/arm/arm32/cpuswitch.S Fri Mar 27 11:27:39 2015 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: cpuswitch.S,v 1.84 2014/06/15 02:27:15 ozaki-r Exp $ */
+/* $NetBSD: cpuswitch.S,v 1.84.2.1 2015/03/27 11:27:39 martin Exp $ */
/*
* Copyright 2003 Wasabi Systems, Inc.
@@ -87,7 +87,7 @@
#include <arm/asm.h>
#include <arm/locore.h>
- RCSID("$NetBSD: cpuswitch.S,v 1.84 2014/06/15 02:27:15 ozaki-r Exp $")
+ RCSID("$NetBSD: cpuswitch.S,v 1.84.2.1 2015/03/27 11:27:39 martin Exp $")
/* LINTSTUB: include <sys/param.h> */
@@ -137,18 +137,18 @@
mov r4, r0
#ifdef TPIDRPRW_IS_CURCPU
- GET_CURCPU(r3)
+ GET_CURCPU(r5)
#elif defined(TPIDRPRW_IS_CURLWP)
mrc p15, 0, r0, c13, c0, 4 /* get old lwp (r4 maybe 0) */
- ldr r3, [r0, #(L_CPU)] /* get cpu from old lwp */
+ ldr r5, [r0, #(L_CPU)] /* get cpu from old lwp */
#elif !defined(MULTIPROCESSOR)
- ldr r3, [r6, #L_CPU] /* get cpu from new lwp */
+ ldr r5, [r6, #L_CPU] /* get cpu from new lwp */
#else
#error curcpu() method not defined
#endif
- /* rem: r3 = curcpu() */
/* rem: r4 = old lwp */
+ /* rem: r5 = curcpu() */
/* rem: r6 = new lwp */
#ifndef __HAVE_UNNESTED_INTRS
@@ -156,7 +156,7 @@
#endif
#ifdef MULTIPROCESSOR
- str r3, [r6, #(L_CPU)]
+ str r5, [r6, #(L_CPU)]
#else
/* l->l_cpu initialized in fork1() for single-processor */
#endif
@@ -165,20 +165,16 @@
mcr p15, 0, r6, c13, c0, 4 /* set current lwp */
#endif
/* We have a new curlwp now so make a note it */
- str r6, [r3, #(CI_CURLWP)]
-
- /* Get the new pcb */
- ldr r7, [r6, #(L_PCB)]
+ str r6, [r5, #(CI_CURLWP)]
/* At this point we can allow IRQ's again. */
#ifndef __HAVE_UNNESTED_INTRS
IRQenable
#endif
- /* rem: r3 = curcpu() */
/* rem: r4 = old lwp */
+ /* rem: r5 = curcpu() */
/* rem: r6 = new lwp */
- /* rem: r7 = new pcb */
/* rem: interrupts are enabled */
/*
@@ -190,24 +186,23 @@
teq r4, #0
beq .Ldo_switch
- /* rem: r3 = curcpu() */
/* rem: r4 = old lwp */
+ /* rem: r5 = curcpu() */
/* rem: r6 = new lwp */
- /* rem: r7 = new pcb */
/* rem: interrupts are enabled */
/* Save old context */
/* Get the user structure for the old lwp. */
- ldr r5, [r4, #(L_PCB)]
+ ldr r7, [r4, #(L_PCB)]
/* Save all the registers in the old lwp's pcb */
#if defined(_ARM_ARCH_DWORD_OK)
- strd r8, r9, [r5, #(PCB_R8)]
- strd r10, r11, [r5, #(PCB_R10)]
- strd r12, r13, [r5, #(PCB_R12)]
+ strd r8, r9, [r7, #(PCB_R8)]
+ strd r10, r11, [r7, #(PCB_R10)]
+ strd r12, r13, [r7, #(PCB_R12)]
#else
- add r0, r5, #(PCB_R8)
+ add r0, r7, #(PCB_R8)
stmia r0, {r8-r13}
#endif
@@ -216,29 +211,38 @@
* Save user read/write thread/process id register
*/
mrc p15, 0, r0, c13, c0, 2
- str r0, [r5, #(PCB_USER_PID_RW)]
+ str r0, [r7, #(PCB_USER_PID_RW)]
#endif
/*
* NOTE: We can now use r8-r13 until it is time to restore
* them for the new process.
*/
- /* rem: r3 = curcpu() */
/* rem: r4 = old lwp */
- /* rem: r5 = old pcb */
+ /* rem: r5 = curcpu() */
/* rem: r6 = new lwp */
- /* rem: r7 = new pcb */
/* rem: interrupts are enabled */
/* Restore saved context */
.Ldo_switch:
- /* rem: r3 = curcpu() */
+ /* Get the new pcb */
+ ldr r7, [r6, #(L_PCB)]
+
/* rem: r4 = old lwp */
+ /* rem: r5 = curcpu() */
/* rem: r6 = new lwp */
/* rem: r7 = new pcb */
/* rem: interrupts are enabled */
+ /*
+ * If we are switching to a system lwp, don't bother restoring
+ * thread or vfp registers and skip the ras check.
+ */
+ ldr r0, [r6, #(L_FLAG)]
+ tst r0, #(LW_SYSTEM)
+ bne .Lswitch_do_restore
+
#ifdef _ARM_ARCH_6
/*
* Restore user thread/process id registers
@@ -253,14 +257,34 @@
/*
* If we have a VFP, we need to load FPEXC.
*/
- ldr r0, [r3, #(CI_VFP_ID)]
+ ldr r0, [r5, #(CI_VFP_ID)]
cmp r0, #0
ldrne r0, [r7, #(PCB_VFP_FPEXC)]
vmsrne fpexc, r0
#endif
- ldr r5, [r6, #(L_PROC)] /* fetch the proc for below */
+ /*
+ * Check for restartable atomic sequences (RAS).
+ */
+
+ ldr r0, [r6, #(L_PROC)] /* fetch the proc for ras_lookup */
+ ldr r2, [r0, #(P_RASLIST)]
+ cmp r2, #0 /* p->p_nras == 0? */
+ beq .Lswitch_do_restore
+ /* we can use r8 since we haven't restored saved registers yet. */
+ ldr r8, [r6, #(L_MD_TF)] /* r1 = trapframe (used below) */
+ ldr r1, [r8, #(TF_PC)] /* second ras_lookup() arg */
+ bl _C_LABEL(ras_lookup)
+ cmn r0, #1 /* -1 means "not in a RAS" */
+ strne r0, [r8, #(TF_PC)]
+
+ /* rem: r4 = old lwp */
+ /* rem: r5 = curcpu() */
+ /* rem: r6 = new lwp */
+ /* rem: r7 = new pcb */
+
+.Lswitch_do_restore:
/* Restore all the saved registers */
#ifdef __XSCALE__
ldr r8, [r7, #(PCB_R8)]
@@ -280,24 +304,9 @@
/* Record the old lwp for pmap_activate()'s benefit */
#ifndef ARM_MMU_EXTENDED
- str r4, [r3, #CI_LASTLWP]
+ str r4, [r5, #CI_LASTLWP]
#endif
- /* rem: r4 = old lwp */
- /* rem: r5 = new lwp's proc */
- /* rem: r6 = new lwp */
- /* rem: r7 = new pcb */
-
- /*
- * Check for restartable atomic sequences (RAS).
- */
-
- ldr r2, [r5, #(P_RASLIST)]
- ldr r1, [r6, #(L_MD_TF)] /* r1 = trapframe (used below) */
- teq r2, #0 /* p->p_nras == 0? */
- bne .Lswitch_do_ras /* no, check for one */
-
-.Lswitch_return:
/* cpu_switchto returns the old lwp */
mov r0, r4
/* lwp_trampoline expects new lwp as it's second argument */
@@ -313,14 +322,6 @@
*/
pop {r4-r7, ip, pc}
-.Lswitch_do_ras:
- ldr r1, [r1, #(TF_PC)] /* second ras_lookup() arg */
- mov r0, r5 /* first ras_lookup() arg */
- bl _C_LABEL(ras_lookup)
- cmn r0, #1 /* -1 means "not in a RAS" */
- ldrne r1, [r6, #(L_MD_TF)]
- strne r0, [r1, #(TF_PC)]
- b .Lswitch_return
END(cpu_switchto)
ENTRY_NP(lwp_trampoline)
@@ -397,6 +398,15 @@
stmia r3, {r8-r13}
#endif
+#ifdef _ARM_ARCH_6
+ /*
+ * Save user read/write thread/process id register in cause it was
+ * set in userland.
+ */
+ mrc p15, 0, r0, c13, c0, 2
+ str r0, [r2, #(PCB_USER_PID_RW)]
+#endif
+
/* this is an invariant so load before disabling intrs */
ldr r2, [r5, #(L_PCB)] /* get new lwp's pcb */
diff -r 7925d059bbc7 -r 1e608f175805 sys/arch/arm/arm32/genassym.cf
--- a/sys/arch/arm/arm32/genassym.cf Thu Mar 26 16:15:38 2015 +0000
+++ b/sys/arch/arm/arm32/genassym.cf Fri Mar 27 11:27:39 2015 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: genassym.cf,v 1.69 2014/04/10 02:48:40 matt Exp $
+# $NetBSD: genassym.cf,v 1.69.2.1 2015/03/27 11:27:39 martin Exp $
# Copyright (c) 1982, 1990 The Regents of the University of California.
# All rights reserved.
@@ -156,10 +156,13 @@
define L_PROC offsetof(struct lwp, l_proc)
define L_CTXSWTCH offsetof(struct lwp, l_ctxswtch)
define L_PRIVATE offsetof(struct lwp, l_private)
+define L_FLAG offsetof(struct lwp, l_flag)
define L_MD_FLAGS offsetof(struct lwp, l_md.md_flags)
define L_MD_TF offsetof(struct lwp, l_md.md_tf)
define MDLWP_NOALIGNFLT MDLWP_NOALIGNFLT
+define LW_SYSTEM LW_SYSTEM
+
define P_RASLIST offsetof(struct proc, p_raslist)
define PCB_R8 offsetof(struct pcb, pcb_un.un_32.pcb32_r8)
Home |
Main Index |
Thread Index |
Old Index