Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/i2c Add AXP806 and AXP809 power management controlle...
details: https://anonhg.NetBSD.org/src/rev/5f6bc3ffae8b
branches: trunk
changeset: 804928:5f6bc3ffae8b
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Sun Dec 07 00:33:26 2014 +0000
description:
Add AXP806 and AXP809 power management controller drivers.
diffstat:
sys/dev/i2c/axp806.c | 404 ++++++++++++++++++++++++++++++++++++++++++++++++++
sys/dev/i2c/axp806.h | 41 +++++
sys/dev/i2c/axp809.c | 337 +++++++++++++++++++++++++++++++++++++++++
sys/dev/i2c/axp809.h | 41 +++++
sys/dev/i2c/files.i2c | 12 +-
5 files changed, 834 insertions(+), 1 deletions(-)
diffs (truncated from 862 to 300 lines):
diff -r 74283c97cef3 -r 5f6bc3ffae8b sys/dev/i2c/axp806.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/i2c/axp806.c Sun Dec 07 00:33:26 2014 +0000
@@ -0,0 +1,404 @@
+/* $NetBSD: axp806.c,v 1.1 2014/12/07 00:33:26 jmcneill Exp $ */
+
+/*-
+ * Copyright (c) 2014 Jared D. McNeill <jmcneill%invisible.ca@localhost>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define AXP_DEBUG
+
+#include <sys/cdefs.h>
+__KERNEL_RCSID(0, "$NetBSD: axp806.c,v 1.1 2014/12/07 00:33:26 jmcneill Exp $");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/device.h>
+#include <sys/conf.h>
+#include <sys/bus.h>
+#include <sys/kmem.h>
+
+#include <dev/i2c/i2cvar.h>
+#include <dev/i2c/axp806.h>
+
+#define AXP_STARTUP_SOURCE_REG 0x00
+#define AXP_IC_TYPE_REG 0x03
+#define AXP_DATA0_REG 0x04
+#define AXP_DATA1_REG 0x05
+#define AXP_DATA2_REG 0x06
+#define AXP_DATA3_REG 0x07
+#define AXP_OUT_CTRL1_REG 0x10
+#define AXP_OUT_CTRL2_REG 0x11
+#define AXP_DCDCA_CTRL_REG 0x12
+#define AXP_DCDCB_CTRL_REG 0x13
+#define AXP_DCDCC_CTRL_REG 0x14
+#define AXP_DCDCD_CTRL_REG 0x15
+#define AXP_DCDCE_CTRL_REG 0x16
+#define AXP_ALDO1_CTRL_REG 0x17
+#define AXP_ALDO2_CTRL_REG 0x18
+#define AXP_ALDO3_CTRL_REG 0x19
+#define AXP_DCDC_MODE_CTRL1_REG 0x1a
+#define AXP_DCDC_MODE_CTRL2_REG 0x1b
+#define AXP_DCDC_FREQ_REG 0x1c
+#define AXP_OUTPUT_MON_CTRL_REG 0x1d
+#define AXP_IRQ_PWROK_REG 0x1f
+#define AXP_BLDO1_CTRL_REG 0x20
+#define AXP_BLDO2_CTRL_REG 0x21
+#define AXP_BLDO3_CTRL_REG 0x22
+#define AXP_BLDO4_CTRL_REG 0x23
+#define AXP_CLDO1_CTRL_REG 0x24
+#define AXP_CLDO2_CTRL_REG 0x25
+#define AXP_CLDO3_CTRL_REG 0x26
+#define AXP_POWER_WAKE_CTRL_REG 0x31
+#define AXP_POWER_DISABLE_REG 0x32
+#define AXP_WAKEUP_PINFUNC_REG 0x35
+#define AXP_POK_SETTING_REG 0x36
+#define AXP_MODE_SEL_REG 0x3e
+#define AXP_SPECIAL_CTRL_REG 0x3f
+#define AXP_IRQ_ENABLE1_REG 0x40
+#define AXP_IRQ_ENABLE2_REG 0x41
+#define AXP_IRQ_STATUS1_REG 0x48
+#define AXP_IRQ_STATUS2_REG 0x49
+#define AXP_VREF_TEMP_WARN_REG 0xf3
+#define AXP_SI_ADDR_EXT_REG 0xfe
+#define AXP_REG_ADDR_EXT_REG 0xff
+
+struct axp806_ctrl {
+ device_t c_dev;
+
+ const char * c_name;
+ u_int c_min;
+ u_int c_max;
+ u_int c_step1;
+ u_int c_step1cnt;
+ u_int c_step2;
+ u_int c_step2cnt;
+
+ uint8_t c_enable_reg;
+ uint8_t c_enable_mask;
+
+ uint8_t c_voltage_reg;
+ uint8_t c_voltage_mask;
+};
+
+#define AXP_CTRL(name, min, max, step, ereg, emask, vreg, vmask) \
+ { .c_name = (name), .c_min = (min), .c_max = (max), \
+ .c_step1 = (step), .c_step1cnt = (((max) - (min)) / (step)) + 1, \
+ .c_step2 = 0, .c_step2cnt = 0, \
+ .c_enable_reg = AXP_##ereg##_REG, .c_enable_mask = (emask), \
+ .c_voltage_reg = AXP_##vreg##_REG, .c_voltage_mask = (vmask) }
+
+#define AXP_CTRL2(name, min, max, step1, step1cnt, step2, step2cnt, ereg, emask, vreg, vmask) \
+ { .c_name = (name), .c_min = (min), .c_max = (max), \
+ .c_step1 = (step1), .c_step1cnt = (step1cnt), \
+ .c_step2 = (step2), .c_step2cnt = (step2cnt), \
+ .c_enable_reg = AXP_##ereg##_REG, .c_enable_mask = (emask), \
+ .c_voltage_reg = AXP_##vreg##_REG, .c_voltage_mask = (vmask) }
+
+static const struct axp806_ctrl axp806_ctrls[] = {
+ AXP_CTRL2("DCDCA", 600, 1520, 10, 51, 20, 21,
+ OUT_CTRL1, __BIT(0), DCDCA_CTRL, __BITS(6,0)),
+ AXP_CTRL("DCDCB", 1000, 2550, 50,
+ OUT_CTRL1, __BIT(1), DCDCB_CTRL, __BITS(4,0)),
+ AXP_CTRL2("DCDCC", 600, 1520, 10, 51, 20, 21,
+ OUT_CTRL1, __BIT(2), DCDCC_CTRL, __BITS(6,0)),
+ AXP_CTRL2("DCDCD", 600, 3300, 20, 46, 100, 18,
+ OUT_CTRL1, __BIT(3), DCDCD_CTRL, __BITS(5,0)),
+ AXP_CTRL("DCDCE", 1100, 3400, 100,
+ OUT_CTRL1, __BIT(4), DCDCE_CTRL, __BITS(4,0)),
+ AXP_CTRL("ALDO1", 700, 3300, 100,
+ OUT_CTRL1, __BIT(5), ALDO1_CTRL, __BITS(4,0)),
+ AXP_CTRL("ALDO2", 700, 3400, 100,
+ OUT_CTRL1, __BIT(6), ALDO2_CTRL, __BITS(4,0)),
+ AXP_CTRL("ALDO3", 700, 3300, 100,
+ OUT_CTRL1, __BIT(7), ALDO3_CTRL, __BITS(4,0)),
+ AXP_CTRL("BLDO1", 700, 1900, 100,
+ OUT_CTRL2, __BIT(0), BLDO1_CTRL, __BITS(3,0)),
+ AXP_CTRL("BLDO2", 700, 1900, 100,
+ OUT_CTRL2, __BIT(1), BLDO2_CTRL, __BITS(3,0)),
+ AXP_CTRL("BLDO3", 700, 1900, 100,
+ OUT_CTRL2, __BIT(2), BLDO3_CTRL, __BITS(3,0)),
+ AXP_CTRL("BLDO4", 700, 1900, 100,
+ OUT_CTRL2, __BIT(3), BLDO4_CTRL, __BITS(3,0)),
+ AXP_CTRL("CLDO1", 700, 3300, 100,
+ OUT_CTRL2, __BIT(4), CLDO1_CTRL, __BITS(4,0)),
+ AXP_CTRL2("CLDO2", 700, 4200, 100, 28, 200, 4,
+ OUT_CTRL2, __BIT(5), CLDO2_CTRL, __BITS(4,0)),
+ AXP_CTRL("CLDO3", 700, 3300, 100,
+ OUT_CTRL2, __BIT(6), CLDO3_CTRL, __BITS(4,0)),
+};
+
+struct axp806_softc {
+ device_t sc_dev;
+ i2c_tag_t sc_i2c;
+ i2c_addr_t sc_addr;
+
+ u_int sc_nctrl;
+ struct axp806_ctrl *sc_ctrl;
+};
+
+static int axp806_match(device_t, cfdata_t, void *);
+static void axp806_attach(device_t, device_t, void *);
+
+static int axp806_read(struct axp806_softc *, uint8_t, uint8_t *);
+static int axp806_write(struct axp806_softc *, uint8_t, uint8_t);
+
+static void axp806_print(struct axp806_ctrl *c);
+
+CFATTACH_DECL_NEW(axp806pm, sizeof(struct axp806_softc),
+ axp806_match, axp806_attach, NULL, NULL);
+
+static int
+axp806_match(device_t parent, cfdata_t match, void *aux)
+{
+ return 1;
+}
+
+static void
+axp806_attach(device_t parent, device_t self, void *aux)
+{
+ struct axp806_softc *sc = device_private(self);
+ struct i2c_attach_args *ia = aux;
+ u_int n;
+
+ sc->sc_dev = self;
+ sc->sc_i2c = ia->ia_tag;
+ sc->sc_addr = ia->ia_addr;
+
+ aprint_naive("\n");
+ aprint_normal("\n");
+
+ sc->sc_nctrl = __arraycount(axp806_ctrls);
+ sc->sc_ctrl = kmem_alloc(sizeof(axp806_ctrls), KM_SLEEP);
+ memcpy(sc->sc_ctrl, axp806_ctrls, sizeof(axp806_ctrls));
+ for (n = 0; n < sc->sc_nctrl; n++) {
+ sc->sc_ctrl[n].c_dev = self;
+ }
+
+#ifdef AXP_DEBUG
+ for (n = 0; n < sc->sc_nctrl; n++) {
+ axp806_print(&sc->sc_ctrl[n]);
+ }
+#endif
+}
+
+static int
+axp806_read(struct axp806_softc *sc, uint8_t reg, uint8_t *val)
+{
+ return iic_smbus_read_byte(sc->sc_i2c, sc->sc_addr, reg, val,
+ cold ? I2C_F_POLL : 0);
+}
+
+static int
+axp806_write(struct axp806_softc *sc, uint8_t reg, uint8_t val)
+{
+ return iic_smbus_write_byte(sc->sc_i2c, sc->sc_addr, reg, val,
+ cold ? I2C_F_POLL : 0);
+}
+
+static void
+axp806_print(struct axp806_ctrl *c)
+{
+ struct axp806_softc *sc = device_private(c->c_dev);
+ u_int voltage;
+ bool enabled;
+
+ device_printf(sc->sc_dev, "%s:", c->c_name);
+ if (c->c_voltage_reg) {
+ if (axp806_get_voltage(c, &voltage)) {
+ printf(" [??? V]");
+ } else {
+ printf(" [%d.%03dV]", voltage / 1000,
+ voltage % 1000);
+ }
+ }
+ if (c->c_enable_reg) {
+ if (axp806_is_enabled(c, &enabled)) {
+ printf(" [unknown state]");
+ } else {
+ printf(" [%s]", enabled ? "ON" : "OFF");
+ }
+ }
+ printf("\n");
+}
+
+struct axp806_ctrl *
+axp806_lookup(device_t dev, const char *name)
+{
+ struct axp806_softc *sc = device_private(dev);
+ struct axp806_ctrl *c;
+ u_int n;
+
+ for (n = 0; n < sc->sc_nctrl; n++) {
+ c = &sc->sc_ctrl[n];
+ if (strcmp(c->c_name, name) == 0) {
+ return c;
+ }
+ }
+
+ return NULL;
+}
+
+int
+axp806_set_voltage(struct axp806_ctrl *c, u_int min, u_int max)
+{
+ struct axp806_softc *sc = device_private(c->c_dev);
+ u_int vol, reg_val;
+ int nstep, error;
+ uint8_t val;
+
+ if (!c->c_voltage_mask)
+ return EINVAL;
+
+ if (min < c->c_min || min > c->c_max)
+ return EINVAL;
+
+ reg_val = 0;
+ nstep = 1;
+ vol = c->c_min;
+
+ for (nstep = 0; nstep < c->c_step1cnt && vol < min; nstep++) {
+ ++reg_val;
+ vol += c->c_step1;
+ }
+ for (nstep = 0; nstep < c->c_step2cnt && vol < min; nstep++) {
+ ++reg_val;
+ vol += c->c_step2;
+ }
+
+ if (vol > max)
+ return EINVAL;
+
+ iic_acquire_bus(sc->sc_i2c, 0);
+ if ((error = axp806_read(sc, c->c_voltage_reg, &val)) != 0)
+ goto done;
+ val &= ~c->c_voltage_mask;
Home |
Main Index |
Thread Index |
Old Index