Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/i2c Add driver for Microchip MCP9800/1/2/3 temperatu...
details: https://anonhg.NetBSD.org/src/rev/4bada700a63a
branches: trunk
changeset: 786670:4bada700a63a
user: rkujawa <rkujawa%NetBSD.org@localhost>
date: Mon May 06 22:04:12 2013 +0000
description:
Add driver for Microchip MCP9800/1/2/3 temperature sensors.
diffstat:
sys/dev/i2c/files.i2c | 7 +-
sys/dev/i2c/mcp980x.c | 228 +++++++++++++++++++++++++++++++++++++++++++++++
sys/dev/i2c/mcp980xreg.h | 57 +++++++++++
3 files changed, 291 insertions(+), 1 deletions(-)
diffs (truncated from 311 to 300 lines):
diff -r d21662079524 -r 4bada700a63a sys/dev/i2c/files.i2c
--- a/sys/dev/i2c/files.i2c Mon May 06 21:21:14 2013 +0000
+++ b/sys/dev/i2c/files.i2c Mon May 06 22:04:12 2013 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: files.i2c,v 1.48 2013/04/25 20:55:34 rkujawa Exp $
+# $NetBSD: files.i2c,v 1.49 2013/05/06 22:04:12 rkujawa Exp $
obsolete defflag opt_i2cbus.h I2C_SCAN
define i2cbus { }
@@ -182,3 +182,8 @@
attach tps65217pmic at iic
file dev/i2c/tps65217pmic.c tps65217pmic
+# Microchip MCP980x
+device mcp980x: sysmon_envsys
+attach mcp980x at iic
+file dev/i2c/mcp980x.c mcp980x
+
diff -r d21662079524 -r 4bada700a63a sys/dev/i2c/mcp980x.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/i2c/mcp980x.c Mon May 06 22:04:12 2013 +0000
@@ -0,0 +1,228 @@
+/* $NetBSD: mcp980x.c,v 1.1 2013/05/06 22:04:12 rkujawa Exp $ */
+
+/*-
+ * Copyright (c) 2013 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Radoslaw Kujawa.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Microchip MCP9800/1/2/3 2-Wire High-Accuracy Temperature Sensor driver.
+ * TODO: everything besides simple temperature read with default configuration.
+ *
+ * Note: MCP9805 is different and is supported by the sdtemp(4) driver.
+ */
+
+#include <sys/cdefs.h>
+__KERNEL_RCSID(0, "$NetBSD: mcp980x.c,v 1.1 2013/05/06 22:04:12 rkujawa Exp $");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/device.h>
+#include <sys/kernel.h>
+#include <sys/mutex.h>
+#include <sys/endian.h>
+
+#include <sys/bus.h>
+#include <dev/i2c/i2cvar.h>
+
+#include <dev/sysmon/sysmonvar.h>
+
+#include <dev/i2c/mcp980xreg.h>
+
+struct mcp980x_softc {
+ device_t sc_dev;
+
+ i2c_tag_t sc_tag;
+ i2c_addr_t sc_addr;
+
+ /* envsys(4) stuff */
+ struct sysmon_envsys *sc_sme;
+ envsys_data_t sc_sensor;
+ kmutex_t sc_lock;
+};
+
+
+static int mcp980x_match(device_t, cfdata_t, void *);
+static void mcp980x_attach(device_t, device_t, void *);
+
+/*static uint8_t mcp980x_reg_read_1(struct mcp980x_softc *sc, uint8_t);*/
+static uint16_t mcp980x_reg_read_2(struct mcp980x_softc *sc, uint8_t reg);
+
+static uint32_t mcp980x_temperature(struct mcp980x_softc *sc);
+
+static void mcp980x_envsys_register(struct mcp980x_softc *);
+static void mcp980x_envsys_refresh(struct sysmon_envsys *, envsys_data_t *);
+
+CFATTACH_DECL_NEW(mcp980x, sizeof (struct mcp980x_softc),
+ mcp980x_match, mcp980x_attach, NULL, NULL);
+
+static int
+mcp980x_match(device_t parent, cfdata_t cf, void *aux)
+{
+ /*
+ * No sane way to probe? Perhaps at least try to match constant part
+ * of the I2Caddress.
+ */
+
+ return 1;
+}
+
+static void
+mcp980x_attach(device_t parent, device_t self, void *aux)
+{
+ struct mcp980x_softc *sc = device_private(self);
+ struct i2c_attach_args *ia = aux;
+
+ sc->sc_dev = self;
+ sc->sc_addr = ia->ia_addr;
+ sc->sc_tag = ia->ia_tag;
+
+ aprint_normal(": Microchip MCP980x Temperature Sensor\n");
+
+ mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE);
+
+ mcp980x_envsys_register(sc);
+}
+
+static uint16_t
+mcp980x_reg_read_2(struct mcp980x_softc *sc, uint8_t reg)
+{
+ uint8_t wbuf[2];
+ uint16_t rv;
+
+ if (iic_acquire_bus(sc->sc_tag, I2C_F_POLL) != 0) {
+ aprint_error_dev(sc->sc_dev, "cannot acquire bus for read\n");
+ return 0;
+ }
+
+ wbuf[0] = reg;
+
+ if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, wbuf,
+ 1, &rv, 2, I2C_F_POLL)) {
+ aprint_error_dev(sc->sc_dev, "cannot execute operation\n");
+ iic_release_bus(sc->sc_tag, I2C_F_POLL);
+ return 0;
+ }
+ iic_release_bus(sc->sc_tag, I2C_F_POLL);
+
+ return be16toh(rv);
+}
+
+/* Will need that later for reading config register. */
+/*
+static uint8_t
+mcp980x_reg_read_1(struct mcp980x_softc *sc, uint8_t reg)
+{
+ uint8_t rv, wbuf[2];
+
+ if (iic_acquire_bus(sc->sc_tag, I2C_F_POLL) != 0) {
+ aprint_error_dev(sc->sc_dev, "cannot acquire bus for read\n");
+ return 0;
+ }
+
+ wbuf[0] = reg;
+
+ if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, wbuf,
+ 1, &rv, 1, I2C_F_POLL)) {
+ aprint_error_dev(sc->sc_dev, "cannot execute operation\n");
+ iic_release_bus(sc->sc_tag, I2C_F_POLL);
+ return 0;
+ }
+ iic_release_bus(sc->sc_tag, I2C_F_POLL);
+
+ return rv;
+}*/
+
+/* Get temperature in microKelvins. */
+static uint32_t
+mcp980x_temperature(struct mcp980x_softc *sc)
+{
+ uint16_t raw;
+ uint32_t rv, uk, basedegc;
+
+ raw = mcp980x_reg_read_2(sc, MCP980X_AMBIENT_TEMP);
+
+ basedegc = (raw & MCP980X_AMBIENT_TEMP_DEGREES) >>
+ MCP980X_AMBIENT_TEMP_DEGREES_SHIFT;
+
+ uk = 1000000 * basedegc;
+
+ if (raw & MCP980X_AMBIENT_TEMP_05DEGREE)
+ uk += 500000;
+ if (raw & MCP980X_AMBIENT_TEMP_025DEGREE)
+ uk += 250000;
+ if (raw & MCP980X_AMBIENT_TEMP_0125DEGREE)
+ uk += 125000;
+ if (raw & MCP980X_AMBIENT_TEMP_00625DEGREE)
+ uk += 62500;
+
+ if (raw & MCP980X_AMBIENT_TEMP_SIGN)
+ rv = 273150000U - uk;
+ else
+ rv = 273150000U + uk;
+
+ return rv;
+}
+
+static void
+mcp980x_envsys_register(struct mcp980x_softc *sc)
+{
+ sc->sc_sme = sysmon_envsys_create();
+
+ strlcpy(sc->sc_sensor.desc, "Ambient temp",
+ sizeof(sc->sc_sensor.desc));
+ sc->sc_sensor.units = ENVSYS_STEMP;
+ sc->sc_sensor.state = ENVSYS_SINVALID;
+
+ if (sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_sensor)) {
+ aprint_error_dev(sc->sc_dev,
+ "error attaching sensor\n");
+ return;
+ }
+
+ sc->sc_sme->sme_name = device_xname(sc->sc_dev);
+ sc->sc_sme->sme_cookie = sc;
+ sc->sc_sme->sme_refresh = mcp980x_envsys_refresh;
+
+ if (sysmon_envsys_register(sc->sc_sme)) {
+ aprint_error_dev(sc->sc_dev, "unable to register in sysmon\n");
+ sysmon_envsys_destroy(sc->sc_sme);
+ }
+}
+
+static void
+mcp980x_envsys_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
+{
+ struct mcp980x_softc *sc = sme->sme_cookie;
+
+ mutex_enter(&sc->sc_lock);
+
+ edata->value_cur = mcp980x_temperature(sc);
+ edata->state = ENVSYS_SVALID;
+
+ mutex_exit(&sc->sc_lock);
+}
diff -r d21662079524 -r 4bada700a63a sys/dev/i2c/mcp980xreg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/i2c/mcp980xreg.h Mon May 06 22:04:12 2013 +0000
@@ -0,0 +1,57 @@
+/* $NetBSD: mcp980xreg.h,v 1.1 2013/05/06 22:04:12 rkujawa Exp $ */
+
+/*-
+ * Copyright (c) 2013 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Radoslaw Kujawa.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MCP980XREG_H_
+#define _MCP980XREG_H_
+
+#define MCP980X_ADDR_CONST 0x48 /* 1001___ */
+#define MCP980X_ADDR_VAR 0x7 /* XXX */
+
+#define MCP980X_AMBIENT_TEMP 0x0
+
+#define MCP980X_AMBIENT_TEMP_00625DEGREE __BIT(4)
+#define MCP980X_AMBIENT_TEMP_0125DEGREE __BIT(5)
+#define MCP980X_AMBIENT_TEMP_025DEGREE __BIT(6)
+#define MCP980X_AMBIENT_TEMP_05DEGREE __BIT(7)
+#define MCP980X_AMBIENT_TEMP_DEGREES __BITS(8,14)
+#define MCP980X_AMBIENT_TEMP_DEGREES_SHIFT 8
+#define MCP980X_AMBIENT_TEMP_SIGN __BIT(15)
Home |
Main Index |
Thread Index |
Old Index