[src/trunk]: src/distrib/utils/embedded/conf double quote police

[christos <christos%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/1d5dbe05ec17
branches:  trunk
changeset: 808578:1d5dbe05ec17
user:      christos <christos%NetBSD.org@localhost>
date:      Sun May 24 17:11:18 2015 +0000

description:
double quote police

diffstat:

 distrib/utils/embedded/conf/armv7.conf |  22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)

diffs (87 lines):

diff -r 849501bef751 -r 1d5dbe05ec17 distrib/utils/embedded/conf/armv7.conf
--- a/distrib/utils/embedded/conf/armv7.conf    Sun May 24 17:08:50 2015 +0000
+++ b/distrib/utils/embedded/conf/armv7.conf    Sun May 24 17:11:18 2015 +0000
@@ -1,4 +1,4 @@
-# $NetBSD: armv7.conf,v 1.3 2015/05/22 01:18:22 jmcneill Exp $
+# $NetBSD: armv7.conf,v 1.4 2015/05/24 17:11:18 christos Exp $
 # ARMv7 customization script used by mkimage
 #
 board=armv7
@@ -22,7 +22,7 @@
 
 customize() {
        customize_evbarm
-       cat >> ${mnt}/etc/rc.conf << EOF
+       cat >> "${mnt}/etc/rc.conf" << EOF
 mdnsd=YES
 wscons=YES
 devpubd=YES
@@ -36,20 +36,20 @@
        bbone_loadaddr=82000000
 
        # Create a uEnv.txt to auto boot the correct kernel
-       cat >> ${mnt}/boot/uEnv.txt << EOF
+       cat >> "${mnt}/boot/uEnv.txt" << EOF
 loaduimage=if test \$board = am335x; then fatload mmc 0 ${bbone_loadaddr} ${bbone_kernelimg}; bootm ${bbone_loadaddr} root=ld0a; else fatload mmc 0 ${bboard_loadaddr} ${bboard_kernelimg}; bootm 
${bboard_loadaddr} root=ld0a; fi
 EOF
 }
 
 populate_awin() {
-       cat >> ${mnt}/boot/uEnv.txt << EOF
+       cat >> "${mnt}/boot/uEnv.txt" << EOF
 bootargs=root=ld0a console=${console}
 uenvcmd=mmc dev 0; mmc rescan; if test \$fdtfile = sun7i-a20-cubieboard2.dtb; then setenv kernel netbsd-CUBIEBOARD2.ub; elif test \$fdtfile = sun7i-a20-cubietruck.dtb; then setenv kernel 
netbsd-CUBIETRUCK.ub; elif test \$fdtfile = sun6i-a31-hummingbird.dtb; then setenv kernel netbsd-HUMMINGBIRD_A31.ub; elif test \$fdtfile = sun7i-a20-bananapi.dtb; then setenv kernel netbsd-BPI.ub; 
fi; fatload mmc 0:1 82000000 ${kernel}; bootm 82000000
 EOF
 }
 
 populate_rpi() {
-       firmwaredir=${src}/external/broadcom/rpi-firmware/dist
+       firmwaredir="${src}/external/broadcom/rpi-firmware/dist"
        firmwarefiles="LICENCE.broadcom bootcode.bin fixup.dat fixup_cd.dat start.elf start_cd.elf"
 
        # RPI2 kernel needs to be installed as kernel7.img
@@ -57,17 +57,17 @@
                echo "${bar} renaming netbsd-RPI2.bin to kernel7.img ${bar}"
                mv "${mnt}/boot/netbsd-RPI2.bin" "${mnt}/boot/kernel7.img"
 
-               cat > ${mnt}/boot/cmdline.txt << EOF
+               cat > "${mnt}/boot/cmdline.txt" << EOF
 root=ld0a console=${console}
 #fb=1280x1024          # to select a mode, otherwise try EDID
 #fb=disable            # to disable fb completely
 EOF
 
                echo "${bar} installing firmware files ${bar}"
-               (cd ${mnt}/boot &&
+               (cd "${mnt}/boot" &&
                        for f in ${firmwarefiles}; do
                                echo " $f"
-                               cp ${firmwaredir}/${f} .
+                               cp "${firmwaredir}/${f}" .
                        done
                )
 
@@ -78,7 +78,7 @@
        odroidc1_kernelimg=netbsd-ODROID-C1.ub
 
        # Create a boot.ini for Amlogic U-Boot
-       cat >> ${mnt}/boot/boot.ini << EOF
+       cat >> "${mnt}/boot/boot.ini" << EOF
 ODROIDC-UBOOT-CONFIG
 
 setenv bootargs "root=ld0f awge0.mac-address=\${ethaddr} console=${console}"
@@ -91,12 +91,12 @@
        jetsontk1_kernelimg=netbsd-JETSONTK1.ub
 
        # Create a boot.scr for Jetson TK1 U-Boot
-       cat > ${mnt}/boot/boot-JETSONTK1.txt << EOF
+       cat > "${mnt}/boot/boot-JETSONTK1.txt" << EOF
 setenv bootargs root=ld1a
 fatload mmc 1:1 0x90000000 ${jetsontk1_kernelimg}
 bootm 0x90000000
 EOF
-       ${MKUBOOTIMAGE} -A arm -C none -O netbsd -T script -a 0 -n "NetBSD/tegra boot" ${mnt}/boot/boot-JETSONTK1.txt ${mnt}/boot/boot-JETSONTK1.scr
+       "${MKUBOOTIMAGE}" -A arm -C none -O netbsd -T script -a 0 -n "NetBSD/tegra boot" "${mnt}/boot/boot-JETSONTK1.txt" "${mnt}/boot/boot-JETSONTK1.scr"
 }
 
 populate() {