Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/dev/pci - The Captured Slot Power Limit value is only fo...
details: https://anonhg.NetBSD.org/src/rev/50559b718c4d
branches: trunk
changeset: 824069:50559b718c4d
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Mon May 22 04:21:20 2017 +0000
description:
- The Captured Slot Power Limit value is only for device which has upsteam
port.
- The following three registers are the same encoding, so use the same
function:
- the Captured Slot Power Limit in the Device Capability register of PICe
capability.
- the Slot Power Limit in Slot Capability register of PCIe capability.
- the Base Power and Data Scale in the Data Register of Power Budgeting
capability.
- Fix the alternative encoding check of power limit as document. Add check if
scale equals to 0.
diffstat:
sys/dev/pci/pci_subr.c | 97 ++++++++++++++++++++++++++++---------------------
1 files changed, 56 insertions(+), 41 deletions(-)
diffs (194 lines):
diff -r 58ddfb4411a2 -r 50559b718c4d sys/dev/pci/pci_subr.c
--- a/sys/dev/pci/pci_subr.c Sun May 21 22:48:25 2017 +0000
+++ b/sys/dev/pci/pci_subr.c Mon May 22 04:21:20 2017 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: pci_subr.c,v 1.180 2017/05/09 11:17:07 msaitoh Exp $ */
+/* $NetBSD: pci_subr.c,v 1.181 2017/05/22 04:21:20 msaitoh Exp $ */
/*
* Copyright (c) 1997 Zubin D. Dittia. All rights reserved.
@@ -40,7 +40,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: pci_subr.c,v 1.180 2017/05/09 11:17:07 msaitoh Exp $");
+__KERNEL_RCSID(0, "$NetBSD: pci_subr.c,v 1.181 2017/05/22 04:21:20 msaitoh Exp $");
#ifdef _KERNEL_OPT
#include "opt_pci.h"
@@ -71,6 +71,7 @@
#endif
static int pci_conf_find_cap(const pcireg_t *, int, unsigned int, int *);
+static void pci_conf_print_pcie_power(uint8_t, unsigned int);
/*
* Descriptions of known PCI classes and subclasses.
@@ -1651,6 +1652,7 @@
bool check_link = true;
bool check_slot = false;
bool check_rootport = false;
+ bool check_upstreamport = false;
unsigned int pciever;
unsigned int i;
@@ -1664,9 +1666,11 @@
switch ((reg & 0x00f00000) >> 20) {
case PCIE_XCAP_TYPE_PCIE_DEV: /* 0x0 */
printf("PCI Express Endpoint device\n");
+ check_upstreamport = true;
break;
case PCIE_XCAP_TYPE_PCI_DEV: /* 0x1 */
printf("Legacy PCI Express Endpoint device\n");
+ check_upstreamport = true;
break;
case PCIE_XCAP_TYPE_ROOT: /* 0x4 */
printf("Root Port of PCI Express Root Complex\n");
@@ -1675,6 +1679,7 @@
break;
case PCIE_XCAP_TYPE_UP: /* 0x5 */
printf("Upstream Port of PCI Express Switch\n");
+ check_upstreamport = true;
break;
case PCIE_XCAP_TYPE_DOWN: /* 0x6 */
printf("Downstream Port of PCI Express Switch\n");
@@ -1683,9 +1688,11 @@
break;
case PCIE_XCAP_TYPE_PCIE2PCI: /* 0x7 */
printf("PCI Express to PCI/PCI-X Bridge\n");
+ check_upstreamport = true;
break;
case PCIE_XCAP_TYPE_PCI2PCIE: /* 0x8 */
printf("PCI/PCI-X to PCI Express Bridge\n");
+ /* Upstream port is not PCIe */
check_slot = true;
break;
case PCIE_XCAP_TYPE_ROOT_INTEP: /* 0x9 */
@@ -1735,10 +1742,12 @@
onoff("Attention Indicator Present", reg, PCIE_DCAP_ATTN_IND);
onoff("Power Indicator Present", reg, PCIE_DCAP_PWR_IND);
onoff("Role-Based Error Report", reg, PCIE_DCAP_ROLE_ERR_RPT);
- printf(" Captured Slot Power Limit Value: %u\n",
- (unsigned int)__SHIFTOUT(reg, PCIE_DCAP_SLOT_PWR_LIM_VAL));
- printf(" Captured Slot Power Limit Scale: %u\n",
- (unsigned int)__SHIFTOUT(reg, PCIE_DCAP_SLOT_PWR_LIM_SCALE));
+ if (check_upstreamport) {
+ printf(" Captured Slot Power Limit: ");
+ pci_conf_print_pcie_power(
+ __SHIFTOUT(reg, PCIE_DCAP_SLOT_PWR_LIM_VAL),
+ __SHIFTOUT(reg, PCIE_DCAP_SLOT_PWR_LIM_SCALE));
+ }
onoff("Function-Level Reset Capability", reg, PCIE_DCAP_FLR);
/* Device Control Register */
@@ -1882,10 +1891,9 @@
onoff("Power Indicator Present", reg, PCIE_SLCAP_PIP);
onoff("Hot-Plug Surprise", reg, PCIE_SLCAP_HPS);
onoff("Hot-Plug Capable", reg, PCIE_SLCAP_HPC);
- printf(" Slot Power Limit Value: %d\n",
- (unsigned int)(reg & PCIE_SLCAP_SPLV) >> 7);
- printf(" Slot Power Limit Scale: %d\n",
- (unsigned int)(reg & PCIE_SLCAP_SPLS) >> 15);
+ printf(" Slot Power Limit Value: ");
+ pci_conf_print_pcie_power(__SHIFTOUT(reg, PCIE_SLCAP_SPLV),
+ __SHIFTOUT(reg, PCIE_SLCAP_SPLS));
onoff("Electromechanical Interlock Present", reg,
PCIE_SLCAP_EIP);
onoff("No Command Completed Support", reg, PCIE_SLCAP_NCCS);
@@ -2700,40 +2708,47 @@
" VC", varbsel, varbsize);
}
+/*
+ * Print Power limit. This encoding is the same among the following registers:
+ * - The Captured Slot Power Limit in the PCIe Device Capability Register.
+ * - The Slot Power Limit in the PCIe Slot Capability Register.
+ * - The Base Power in the Data register of Power Budgeting capability.
+ */
static void
-pci_conf_print_pwrbdgt_base_power(uint8_t base, unsigned int scale)
+pci_conf_print_pcie_power(uint8_t base, unsigned int scale)
{
- if (base <= 0xef) {
- unsigned int sdiv = 1;
- for (unsigned int i = scale; i > 0; i--)
- sdiv *= 10;
-
- printf("%u", base / sdiv);
-
- if (scale != 0) {
- printf(".%u", base % sdiv);
+ unsigned int sdiv = 1;
+
+ if ((scale == 0) && (base > 0xef)) {
+ const char *s;
+
+ switch (base) {
+ case 0xf0:
+ s = "239W < x <= 250W";
+ break;
+ case 0xf1:
+ s = "250W < x <= 275W";
+ break;
+ case 0xf2:
+ s = "275W < x <= 300W";
+ break;
+ default:
+ s = "reserved for above 300W";
+ break;
}
- printf ("W\n");
- return;
+ printf("%s\n", s);
}
- const char *s;
-
- switch (base) {
- case 0xf0:
- s = "239W < x <= 250W";
- break;
- case 0xf1:
- s = "250W < x <= 275W";
- break;
- case 0xf2:
- s = "275W < x <= 300W";
- break;
- default:
- s = "reserved for above 300W";
- break;
+ for (unsigned int i = scale; i > 0; i--)
+ sdiv *= 10;
+
+ printf("%u", base / sdiv);
+
+ if (scale != 0) {
+ printf(".%u", base % sdiv);
}
- printf("%s\n", s);
+ printf ("W\n");
+ return;
}
static const char *
@@ -2782,7 +2797,6 @@
pci_conf_print_pwrbdgt_cap(const pcireg_t *regs, int capoff, int extcapoff)
{
pcireg_t reg;
- unsigned int scale;
printf("\n Power Budgeting\n");
@@ -2791,9 +2805,10 @@
reg = regs[o2i(extcapoff + PCI_PWRBDGT_DATA)];
printf(" Data register: 0x%08x\n", reg);
- scale = __SHIFTOUT(reg, PCI_PWRBDGT_DATA_SCALE);
printf(" Base Power: ");
- pci_conf_print_pwrbdgt_base_power((uint8_t)reg, scale);
+ pci_conf_print_pcie_power(
+ __SHIFTOUT(reg, PCI_PWRBDGT_DATA_BASEPWR),
+ __SHIFTOUT(reg, PCI_PWRBDGT_DATA_SCALE));
printf(" PM Sub State: 0x%hhx\n",
(uint8_t)__SHIFTOUT(reg, PCI_PWRBDGT_PM_SUBSTAT));
printf(" PM State: D%u\n",
Home |
Main Index |
Thread Index |
Old Index