Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/evbarm/conf Remove OMAP5432_EVM to OMAP5EVM. Add i...
details: https://anonhg.NetBSD.org/src/rev/4e4a3d04aead
branches: trunk
changeset: 794943:4e4a3d04aead
user: matt <matt%NetBSD.org@localhost>
date: Sat Mar 29 14:05:58 2014 +0000
description:
Remove OMAP5432_EVM to OMAP5EVM. Add install kernel.
diffstat:
sys/arch/evbarm/conf/OMAP5432_EVM | 312 ----------------------------------
sys/arch/evbarm/conf/OMAP5EVM | 309 +++++++++++++++++++++++++++++++++
sys/arch/evbarm/conf/OMAP5EVM_INSTALL | 11 +
3 files changed, 320 insertions(+), 312 deletions(-)
diffs (truncated from 644 to 300 lines):
diff -r 173941d65044 -r 4e4a3d04aead sys/arch/evbarm/conf/OMAP5432_EVM
--- a/sys/arch/evbarm/conf/OMAP5432_EVM Sat Mar 29 14:04:31 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,312 +0,0 @@
-#
-# $NetBSD: OMAP5432_EVM,v 1.3 2013/06/30 21:38:56 rmind Exp $
-#
-# PANDABOARD -- TI OMAP 4430 Eval Board Kernel
-#
-
-include "arch/evbarm/conf/std.beagle"
-
-# estimated number of users
-
-maxusers 32
-
-# Standard system options
-
-options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
-#options NTP # NTP phase/frequency locked loop
-
-# CPU options
-
-options CPU_CORTEXA15
-options OMAP_5430
-options PMAPCOUNTERS
-no options __HAVE_MM_MD_DIRECT_MAPPED_PHYS # too much memory to direct map
-
-# Architecture options
-
-# File systems
-
-file-system FFS # UFS
-#file-system LFS # log-structured file system
-file-system MFS # memory file system
-file-system NFS # Network file system
-#file-system ADOSFS # AmigaDOS-compatible file system
-#file-system EXT2FS # second extended file system (linux)
-#file-system CD9660 # ISO 9660 + Rock Ridge file system
-file-system MSDOSFS # MS-DOS file system
-#file-system FDESC # /dev/fd
-#file-system KERNFS # /kern
-#file-system NULLFS # loopback file system
-#file-system PROCFS # /proc
-#file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
-#file-system UMAPFS # NULLFS + uid and gid remapping
-#file-system UNION # union file system
-file-system TMPFS # memory file system
-file-system PTYFS # /dev/pts/N support
-
-# File system options
-#options QUOTA # legacy UFS quotas
-#options QUOTA2 # new, in-filesystem UFS quotas
-#options FFS_EI # FFS Endian Independant support
-#options NFSSERVER
-options WAPBL # File system journaling support - Experimental
-#options FFS_NO_SNAPSHOT # No FFS snapshot support
-
-# Networking options
-
-#options GATEWAY # packet forwarding
-options INET # IP + ICMP + TCP + UDP
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_DEBUG # debug for IP security
-#options MROUTING # IP multicast routing
-#options PIM # Protocol Independent Multicast
-#options NETATALK # AppleTalk networking
-#options PPP_BSDCOMP # BSD-Compress compression support for PPP
-#options PPP_DEFLATE # Deflate compression support for PPP
-#options PPP_FILTER # Active filter support for PPP (requires bpf)
-#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
-
-options NFS_BOOT_BOOTP
-options NFS_BOOT_DHCP
-#options NFS_BOOT_BOOTSTATIC
-#options NFS_BOOTSTATIC_MYIP="\"192.168.1.4\""
-#options NFS_BOOTSTATIC_GWIP="\"192.168.1.1\""
-#options NFS_BOOTSTATIC_MASK="\"255.255.255.0\""
-#options NFS_BOOTSTATIC_SERVADDR="\"192.168.1.1\""
-#options NFS_BOOTSTATIC_SERVER="\"192.168.1.1:/nfs/sdp2430\""
-
-options NFS_BOOT_RWSIZE=1024
-
-# Compatibility options
-
-#options COMPAT_43 # 4.3BSD compatibility.
-options COMPAT_60 # NetBSD 6.0 compatibility.
-options COMPAT_50 # NetBSD 5.0 compatibility.
-options COMPAT_40 # NetBSD 4.0 compatibility.
-options COMPAT_30 # NetBSD 3.0 compatibility.
-#options COMPAT_20 # NetBSD 2.0 compatibility.
-#options COMPAT_16 # NetBSD 1.6 compatibility.
-#options COMPAT_15 # NetBSD 1.5 compatibility.
-#options COMPAT_14 # NetBSD 1.4 compatibility.
-#options COMPAT_13 # NetBSD 1.3 compatibility.
-#options COMPAT_12 # NetBSD 1.2 compatibility.
-#options COMPAT_11 # NetBSD 1.1 compatibility.
-#options COMPAT_10 # NetBSD 1.0 compatibility.
-#options COMPAT_09 # NetBSD 0.9 compatibility.
-#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
-#options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
-
-# Shared memory options
-
-options SYSVMSG # System V-like message queues
-options SYSVSEM # System V-like semaphores
-#options SEMMNI=10 # number of semaphore identifiers
-#options SEMMNS=60 # number of semaphores in system
-#options SEMUME=10 # max number of undo entries per process
-#options SEMMNU=30 # number of undo structures in system
-options SYSVSHM # System V-like memory sharing
-
-# Device options
-
-#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
-#options MEMORY_DISK_ROOT_SIZE=8192 # Size in blocks
-#options MEMORY_DISK_DYNAMIC
-#options MINIROOTSIZE=1000 # Size in blocks
-#options MEMORY_DISK_IS_ROOT # use memory disk as root
-
-# Miscellaneous kernel options
-options KTRACE # system call tracing, a la ktrace(1)
-#options KMEMSTATS # kernel memory statistics
-#options SCSIVERBOSE # Verbose SCSI errors
-#options MIIVERBOSE # Verbose MII autoconfuration messages
-#options DDB_KEYCODE=0x40
-#options USERCONF # userconf(4) support
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-
-# Development and Debugging options
-
-#options PERFCTRS # performance counters
-options DIAGNOSTIC # internally consistency checks
-#options DEBUG
-#options PMAP_DEBUG # Enable pmap_debug_level code
-#options IPKDB # remote kernel debugging
-#options VERBOSE_INIT_ARM # verbose bootstraping messages
-options DDB # in-kernel debugger
-options DDB_ONPANIC=1
-options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
-#options KGDB
-makeoptions DEBUG="-g" # compile full symbol table
-options SYMTAB_SPACE=530000
-
-## USB Debugging options
-options USB_DEBUG
-options EHCI_DEBUG
-options OHCI_DEBUG
-options UHUB_DEBUG
-
-
-# Valid options for BOOT_ARGS:
-# single Boot to single user only
-# kdb Give control to kernel debugger
-# ask Ask for file name to reboot from
-# pmapdebug=<n> If PMAP_DEBUG, set pmap_debug_level to <n>
-# memorydisk=<n> Set memorydisk size to <n> KB
-# quiet Show aprint_naive output
-# verbose Show aprint_normal and aprint_verbose output
-options BOOT_ARGS="\"\""
-
-config netbsd root on ? type ?
-
-# The main bus device
-mainbus0 at root
-
-# The boot cpu
-cpu0 at mainbus?
-
-# A9 core devices
-armperiph0 at mainbus?
-armgic0 at armperiph? # Interrupt Controller
-armgtmr0 at armperiph? # ARM Generic Timer
-
-# Specify the memory size in megabytes.
-#options MEMSIZE=2048
-
-# L3 Interconnect
-L3i0 at mainbus?
-
-# OBIO
-obio0 at mainbus? base 0x4a000000 size 0x0e00000 # L4 CORE (CFG)
-obio1 at mainbus? base 0x4ae00000 size 0x0200000 # L4 WAKEUP
-obio2 at mainbus? base 0x48000000 size 0x1000000 # L4 PERIPHERAL
-obio3 at mainbus? base 0x49000000 size 0x1000000 # L4 ABE
-
-# General Purpose Memory Controller
-gpmc0 at mainbus? base 0x50000000
-
-# SDHC controllers
-sdhc0 at obio0 addr 0x4809C000 size 0x0400 intr 115 # MMC1 83 + 32
-#sdhc1 at obio0 addr 0x480B4000 size 0x0400 intr 118 # MMC2 86 + 32
-#sdhc2 at obio0 addr 0x480AD000 size 0x0400 intr 126 # MMC3 94 + 32
-#sdhc2 at obio0 addr 0x480D1000 size 0x0400 intr 128 # MMC4 96 + 32
-#sdhc2 at obio0 addr 0x480D5000 size 0x0400 intr 91 # MMC5 59 + 32
-sdmmc* at sdhc? # SD/MMC bus
-ld* at sdmmc?
-
-
-omapgpio0 at obio1 addr 0x4ae10000 size 0x0400 intrbase 192 intr 61 #GPIO1
-#omapgpio1 at obio2 addr 0x48055000 size 0x0400 intrbase 224 intr 62 #GPIO2
-#omapgpio2 at obio2 addr 0x48057000 size 0x0400 intrbase 256 intr 63 #GPIO3
-#omapgpio3 at obio2 addr 0x48059000 size 0x0400 intrbase 288 intr 64 #GPIO4
-omapgpio4 at obio2 addr 0x4805B000 size 0x0400 intrbase 320 intr 65 #GPIO5
-#omapgpio5 at obio2 addr 0x4805D000 size 0x0400 intrbase 352 intr 66 #GPIO6
-#omapgpio6 at obio2 addr 0x48051000 size 0x0400 intrbase 384 intr 67 #GPIO7
-#omapgpio7 at obio2 addr 0x48053000 size 0x0400 intrbase 416 intr 153 #GPIO8
-
-gpio* at omapgpio?
-
-# # I2C Controller
-# omapi2c0 at tipb? addr 0xfffb3800 intr 68 mult 4
-# iic* at omapi2c?
-# # omap's own i2c address
-# options OMAP_I2C_ADDRESS=0xe
-# # i2c bus clock low and high times in ns
-# options I2C_LOW_TIME_nSEC=1500
-# options I2C_HIGH_TIME_nSEC=1000
-
-# On-board 16550 UARTs
-com0 at obio2 addr 0x48020000 intr 106 mult 4 # UART3 (console) 74+32
-options CONSADDR=0x48020000, CONSPEED=115200
-
-# Operating System Timer
-#omapmputmr0 at obio2 addr 0x48032000 intr 70 # GP Timer 2 L4PER
-# Statistics Timer
-#omapmputmr1 at obio2 addr 0x48034000 intr 71 # GP Timer 3 L4PER
-# Microtime Reference Timer
-#omapmputmr2 at obio2 addr 0x48036000 intr 72 # GP Timer 4 L4PER
-#options OMAP_MPU_TIMER_CLOCK_FREQ=12000000
-
-# Watchdog timers (no WDT1)
-#omapwdt32k* at obio3 addr 0x49030000 size 2048 # WDT3
-#omapwdt32k* at obio1 addr 0x4a314000 size 2048 # WDT2
-
-# onboard video
-#omapfb* at obio0 addr 0x48050000 size 0x10000
-
-# make sure the console display is always wsdisplay0
-#wsdisplay0 at wsemuldisplaydev? console 1
-#wsdisplay* at wsemuldisplaydev?
-
-# various options for wscons - we try to look as much like a standard
-# sun console as possible
-#options WSEMUL_VT100 # sun terminal emulation
-#options WS_DEFAULT_FG=WSCOL_BLACK
-#options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
-#options WS_KERNEL_FG=WSCOL_GREEN
-#options WS_KERNEL_BG=WSCOL_LIGHT_WHITE
-#options WSDISPLAY_COMPAT_USL # VT handling
-#options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-#options WSDISPLAY_DEFAULTSCREENS=4
-#options FONT_QVSS8x15
-#options FONT_GALLANT12x22 # the console font
-
-#pseudo-device wsmux # mouse & keyboard multiplexor
-#pseudo-device wsfont
-
-# Power, Reset and Clock Management
-prcm* at obio1 addr 0x4A306000 size 0x2000 # PRM Module
-
-# On-board SATA
-ahcisata* at obio0 addr 0x4A140000 size 0x0200 intr 86 # 54 + 32
-atabus* at ahcisata? channel ?
-wd* at atabus? drive ?
-
-# On-board USB
-# OHCI isn't used since the ehci port has a hub directly attached to it.
-ohci* at obio0 addr 0x4A064800 size 0x0400 intr 108 # 76 + 32
-ehci* at obio0 addr 0x4A064C00 size 0x0400 intr 109 # 77 + 32
-#xhci* at obio0 addr 0x4A020000 size 0x10000 intr ??? # ?? + 32 USB3OTG
-#xhci* at obio0 addr 0x4A030000 size 0x10000 intr ??? # ?? + 32 USB3
-usb* at ohci?
-usb* at ehci?
-#usb* at xhci?
-uhub* at usb?
-uhub* at uhub? port ?
-umass* at uhub? port ? configuration ? interface ?
-scsibus* at scsi?
-sd* at scsibus? target ? lun ?
-wd* at umass?
-#uhidev* at uhub?
-#ukbd* at uhidev?
-#ums* at uhidev?
-#wskbd* at ukbd?
-#wsmouse* at ums?
-
-usmsc* at uhub? port ? configuration ? interface ?
-
-# Hardware clocking and power management
-
-options HWCLOCK
-options HWCLOCK_MACHINE="<arch/arm/omap/hwclock_omap1.h>"
-options OMAP_CK_REF_SPEED=12000000
-
-# Pseudo-Devices
-
-# disk/mass storage pseudo-devices
-#pseudo-device md # memory disk device (ramdisk)
Home |
Main Index |
Thread Index |
Old Index