Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/arm/broadcom Correct BCM563XX values.



details:   https://anonhg.NetBSD.org/src/rev/94a3b5f2c441
branches:  trunk
changeset: 794825:94a3b5f2c441
user:      matt <matt%NetBSD.org@localhost>
date:      Wed Mar 26 03:18:56 2014 +0000

description:
Correct BCM563XX values.

diffstat:

 sys/arch/arm/broadcom/bcm53xx_reg.h |  41 ++++++++++++++++++++++++++++++------
 1 files changed, 34 insertions(+), 7 deletions(-)

diffs (105 lines):

diff -r 7974d672f0ec -r 94a3b5f2c441 sys/arch/arm/broadcom/bcm53xx_reg.h
--- a/sys/arch/arm/broadcom/bcm53xx_reg.h       Wed Mar 26 02:39:57 2014 +0000
+++ b/sys/arch/arm/broadcom/bcm53xx_reg.h       Wed Mar 26 03:18:56 2014 +0000
@@ -87,6 +87,7 @@
 
 /* Chip Common B */
 #define CCB_BASE               0x000000
+#ifdef BCM5301X
 #define CCB_SIZE               0x030000
 #define PWM_BASE               0x002000
 #define MII_BASE               0x003000
@@ -94,9 +95,28 @@
 #define TIMER0_BASE            0x005000
 #define TIMER1_BASE            0x006000
 #define SRAB_BASE              0x007000
+#define UART2_BASE             0x008000
+#define SMBUS1_BASE            0x009000
 
 #define CRU_BASE               0x00b000
 #define DMU_BASE               0x00c000
+#elif defined(BCM563XX)
+#define CCB_SIZE               0x040000
+#define GPIO_BASE              0x030000
+#define PWM_BASE               0x031000
+#define MII_BASE               0x032000
+#define RNG_BASE               0x033000
+#define TIMER0_BASE            0x034000
+#define TIMER1_BASE            0x035000
+#define UART2_BASE             0x037000
+#define SMBUS0_BASE            0x038000
+#define WDT_BASE               0x039000
+#define PKA_BASE               0x03a000
+#define SMBUS1_BASE            0x03b000
+
+#define CRU_BASE               0x03e000
+#define DMU_BASE               0x03f000
+#endif
 
 #define DDR_BASE               0x010000
 
@@ -104,8 +124,6 @@
 #define PCIE1_BASE             0x013000
 
 #ifdef BCM5301X
-#define UART2_BASE             0x008000
-#define SMBUS1_BASE            0x009000
 #define PCIE2_BASE             0x014000
 #define SDIO_BASE              0x020000
 #define EHCI_BASE              0x021000
@@ -121,11 +139,6 @@
 #endif
 
 #ifdef BCM563XX
-#define UART2_BASE             0x007000
-#define SMBUS1_BASE            0x008000
-#define WDT_BASE               0x009000
-#define PKA_BASE               0x00a000
-#define SMBUS2_BASE            0x00b000
 #define DMAC_BASE              0x020000
 #define GMAC0_BASE             0x022000
 #define GMAC1_BASE             0x023000
@@ -379,6 +392,10 @@
 #define LCPLL_CONTROL2_CH2_MDIV        __BITS(15,8)    // = (n ? n : 256), clk_ddr 
 #define LCPLL_CONTROL2_CH3_MDIV        __BITS(7,0)     // = (n ? n : 256), clf_dft
 
+#define DMU_CRU_RESET          0x200
+#define DMU_CRU_RESET_IPROC    __BIT(1)
+#define DMU_CRU_RESET_CMICD    __BIT(0)
+
 #endif /* DMU_PRIVATE */
 
 #ifdef DDR_PRIVATE
@@ -657,8 +674,14 @@
 #define IDM_SDIO_BASE                  0x16000
 #define IDM_I2S_M0_BASE                        0x17000
 #define IDM_A9JTAG_M0_BASE             0x18000
+#ifdef BCM5301X
 #define IDM_NAND_BASE                  0x1a000
 #define IDM_QSPI_BASE                  0x1b000
+#endif
+#ifdef BCM563XX
+#define IDM_NAND_BASE                  0x1b000
+#define IDM_QSPI_BASE                  0x1c000
+#endif
 #define IDM_APBX_BASE                  0x21000
 
 #define IDM_IO_CONTROL_DIRECT          0x0408
@@ -933,6 +956,7 @@
 #define NAND_CMD_ADDR  0x000c  // Nand Flash Command Address
 #define NAND_CMD_END_ADDR      0x0010  // Nand Flash Command End Address
 #define NAND_INTFC_STATUS      0x0014  // Nand Flash Interface Status
+#define NAND_CS_NAND_SELECT    0x0018  // Nand Flash CS
 #define NAND_CS_NAND_XOR       0x001c  // Nand Flash EBI
 #define NAND_LL_OP             0x0020  // Nand Flash Low Level Operation
 #define NAND_MPLANE_BASE_EXT_ADDR      0x0024  // Nand Flash Multiplane base address
@@ -1016,6 +1040,9 @@
 #define NAND_CMD_START_CSEL    __BITS(18,16)
 #define NAND_CMD_EXT_ADDRESS   __BITS(15,0)
 
+#define BCM_NAND_IDM_IO_CONTROL_APB_LE_MODE_BIT                __BIT(24)
+
+
 #endif /* NAND_PRIVATE */
 
 #endif /* _ARM_BROADCOM_BCM53XX_REG_H_ */



Home | Main Index | Thread Index | Old Index