[src/trunk]: src/share/man/man4/man4.hp300 - update SYNOPSIS and SEE ALSO for...

To: source-changes-hg%NetBSD.org@localhost
Subject: [src/trunk]: src/share/man/man4/man4.hp300 - update SYNOPSIS and SEE ALSO for...
From: tsutsui <tsutsui%NetBSD.org@localhost>
Date: Mon, 06 Apr 2020 19:58:46 +0000
details:   https://anonhg.NetBSD.org/src/rev/8effe6250b95
branches:  trunk
changeset: 761856:8effe6250b95
user:      tsutsui <tsutsui%NetBSD.org@localhost>
date:      Wed Feb 09 14:13:09 2011 +0000

description:
- update SYNOPSIS and SEE ALSO for wscons support
- remove descriptions about obsolete ioctl

diffstat:

 share/man/man4/man4.hp300/dvbox.4  |  114 ++---------------------------------
 share/man/man4/man4.hp300/gbox.4   |  110 ++--------------------------------
 share/man/man4/man4.hp300/hyper.4  |    9 +-
 share/man/man4/man4.hp300/rbox.4   |  116 +-----------------------------------
 share/man/man4/man4.hp300/topcat.4 |  115 +-----------------------------------
 5 files changed, 31 insertions(+), 433 deletions(-)

diffs (truncated from 589 to 300 lines):

diff -r 693585aaa9fb -r 8effe6250b95 share/man/man4/man4.hp300/dvbox.4
--- a/share/man/man4/man4.hp300/dvbox.4 Wed Feb 09 13:41:00 2011 +0000
+++ b/share/man/man4/man4.hp300/dvbox.4 Wed Feb 09 14:13:09 2011 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: dvbox.4,v 1.5 2010/03/22 18:58:31 joerg Exp $
+.\"    $NetBSD: dvbox.4,v 1.6 2011/02/09 14:13:09 tsutsui Exp $
 .\"
 .\" Copyright (c) 1990, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -33,7 +33,7 @@
 .\"
 .\"     from: @(#)dv.4 8.1 (Berkeley) 6/9/93
 .\"
-.Dd June 9, 1993
+.Dd February 9, 2011
 .Dt DVBOX 4 hp300
 .Os
 .Sh NAME
@@ -41,6 +41,10 @@
 .Nd
 .Tn HP98730
 ``DaVinci'' graphics device interface
+.Sh SYNOPSIS
+.Cd "dvbox* at intio?"
+.Cd "dvbox* at dio? scode ?"
+.Cd "wsdisplay* at dvbox?"
 .Sh DESCRIPTION
 This driver is for the
 .Tn HP98730
@@ -57,108 +61,6 @@
 The hardware installation manual describes the procedure for
 setting these values.
 .Pp
-A user process communicates to the device initially by means of
-.Xr ioctl 2
-calls.  For the
-.Tn HP-UX
-.Xr ioctl 2
-calls supported, refer to
-.Tn HP-UX
-manuals.
-The
-.Bx
-calls supported are:
-.Bl -tag -width indent
-.It Dv GRFIOCGINFO
-Get Graphics Info
-.Pp
-Get info about device, setting the entries in the
-.Ar grfinfo
-structure, as defined in
-.In hpdev/grfioctl.h .
-For the standard 98730, the number of planes should be 4.  The number of
-colors would therefore be 15, excluding black.  If one 98732A frame buffer
-board is installed, there will still be 4 planes, with the 4 planes on the
-colormap board becoming overlay planes.  With each additional 98732 frame
-buffer board 4 planes will be added up to a maximum of 32 planes total.
-.It Dv GRFIOCON
-Graphics On
-.Pp
-Turn graphics on by enabling
-.Tn CRT
-output.  The screen will come on, displaying
-whatever is in the frame buffer, using whatever colormap is in place.
-.It Dv GRFIOCOFF
-Graphics Off
-.Pp
-Turn graphics off by disabling output to the
-.Tn CRT .
-The frame buffer contents
-are not affected.
-.It Dv GRFIOCMAP
-Map Device to user space
-.Pp
-Map in control registers and frame buffer space. Once the device file is
-mapped, the frame buffer structure is accessible.  The structure describing
-the 98730 is defined in
-.In hpdev/grf_dvreg.h .
-.El
-.Sh FILES
-.Bl -tag -width /dev/MAKEDEV.hpux -compact
-.It Pa /dev/grf?
-.Bx
-special file
-.It Pa /dev/crt98730
-.It Pa /dev/ocrt98730
-.Tn HP-UX
-.Em starbase
-special files
-.It Pa /dev/MAKEDEV.hpux
-script for creating
-.Tn HP-UX
-special files
-.El
-.Sh EXAMPLES
-This is a short segment of code showing how the device is opened and mapped
-into user process address space assuming that it is
-.Ql grf0 :
-.Bd -literal -offset indent
-struct dvboxfb *dvbox;
-u_char *Addr, frame_buffer;
-struct grfinfo gi;
-int disp_fd;
-
-disp_fd = open("/dev/grf0",1);
-
-if (ioctl (disp_fd, GRFIOCGINFO, \*[Am]gi) \*[Lt] 0) return -1;
-
-(void) ioctl (disp_fd, GRFIOCON, 0);
-
-Addr = (u_char *) 0;
-if (ioctl (disp_fd, GRFIOCMAP, \*[Am]Addr) \*[Lt] 0) {
-(void) ioctl (disp_fd, GRFIOCOFF, 0);
-return -1;
-}
-dvbox = (dvboxfb *) Addr;                  /* Control Registers   */
-frame_buffer=(u_char *)Addr+gi.gd_regsize; /* Frame buffer memory */
-.Ed
-.Sh DIAGNOSTICS
-None under
-.Bx .
-.Tn HP-UX
-.Tn CE.utilities
-must be used.
-.Sh ERRORS
-.Bl -tag -width [EINVAL]
-.It Bq Er ENODEV
-no such device.
-.It Bq Er EBUSY
-Another process has the device open.
-.It Bq Er EINVAL
-Invalid ioctl specification.
-.El
 .Sh SEE ALSO
-.Xr ioctl 2 ,
-.Xr grf 4
-.Sh BUGS
-Not tested for all configurations of scan board and frame buffer memory boards.
+.Xr wsdisplay 4 ,
+.Xr wscons 4
diff -r 693585aaa9fb -r 8effe6250b95 share/man/man4/man4.hp300/gbox.4
--- a/share/man/man4/man4.hp300/gbox.4  Wed Feb 09 13:41:00 2011 +0000
+++ b/share/man/man4/man4.hp300/gbox.4  Wed Feb 09 14:13:09 2011 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: gbox.4,v 1.5 2010/03/22 18:58:31 joerg Exp $
+.\"    $NetBSD: gbox.4,v 1.6 2011/02/09 14:13:09 tsutsui Exp $
 .\"
 .\" Copyright (c) 1990, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -33,7 +33,7 @@
 .\"
 .\"     from: @(#)gb.4 8.1 (Berkeley) 6/9/93
 .\"
-.Dd June 9, 1993
+.Dd February 9, 2011
 .Dt GB 4 hp300
 .Os
 .Sh NAME
@@ -41,6 +41,10 @@
 .Nd
 .Tn HP98700
 ``Gatorbox'' graphics device interface
+.Sh SYNOPSIS
+.Cd "gbox* at intio?"
+.Cd "gbox* at dio? scode ?"
+.Cd "wsdisplay* at gbox?"
 .Sh DESCRIPTION
 This driver is for the
 .Tn HP98700
@@ -75,104 +79,6 @@
 The
 .%T 98700H Installation Guide
 contains further configuration information.
-.Pp
-The
-.Xr ioctl 2
-calls supported by the
-.Bx
-system for the Gatorbox are:
-.Bl -tag -width indent
-.It Dv GRFIOCGINFO
-Get Graphics Info
-.Pp
-Get info about device, setting the entries in the
-.Em grfinfo
-structure, as defined in
-.In hpdev/grfioctl.h .
-For the standard 98700, the number of planes should be 4.  The number of
-colors would therefore be 15, excluding black.  With the 98701 option installed
-there will be another 4 planes for a total of 8, giving 255 colors.
-.It Dv GRFIOCON
-Graphics On
-.Pp
-Turn graphics on by enabling
-.Tn CRT
-output.  The screen will come on, displaying
-whatever is in the frame buffer, using whatever colormap is in place.
-.It Dv GRFIOCOFF
-Graphics Off
-.Pp
-Turn graphics off by disabling output to the
-.Tn CRT .
-The frame buffer contents
-are not affected.
-.It Dv GRFIOCMAP
-Map Device to user space
-.Pp
-Map in control registers and framebuffer space. Once the device file is
-mapped, the frame buffer structure is accessible.
-The frame buffer structure describing the 98700
-is given in
-.In hpdev/grf_gbreg.h .
-.It Dv GRFIOCUNMAP
-Unmap Device
-.Pp
-Unmap control registers and framebuffer space.
-.Pp
-For further information about the use of ioctl see the man page.
-.El
-.Sh FILES
-.Bl -tag -width /dev/crt98700 -compact
-.It Pa /dev/grf?
-.Bx
-special file
-.It Pa /dev/crt98700
-.Tn HP-UX
-.Em starbase
-special file
-.El
-.Sh EXAMPLES
-A small example of opening, mapping and using the device is given below.
-For more examples of the details on the behavior of the device, see the device
-dependent source files for the X Window System, in the
-.Pa /usr/src/new/X/libhp.fb
-directory.
-.Bd -literal -offset indent
-struct gboxfb *gbox;
-u_char *Addr, frame_buffer;
-struct grfinfo gi;
-int disp_fd;
-
-disp_fd = open("/dev/grf0",1);
-
-if (ioctl (disp_fd, GRFIOCGINFO, \*[Am]gi) \*[Lt] 0) return -1;
-
-(void) ioctl (disp_fd, GRFIOCON, 0);
-
-Addr = (u_char *) 0;
-if (ioctl (disp_fd, GRFIOCMAP, \*[Am]Addr) \*[Lt] 0) {
-(void) ioctl (disp_fd, GRFIOCOFF, 0);
-return -1;
-}
-gbox = (gboxfb *) Addr;                         /* Control Registers   */
-frame_buffer = (u_char *) Addr + gi.gd_regsize; /* Frame buffer memory */
-.Ed
-.Sh DIAGNOSTICS
-None under
-.Bx .
-.Tn HP-UX
-The
-.Tn CE.utilities/Crtadjust
-programs must be used.
-.Sh ERRORS
-.Bl -tag -width [EINVAL]
-.It Bq Er ENODEV
-no such device.
-.It Bq Er EBUSY
-Another process has the device open.
-.It Bq Er EINVAL
-Invalid ioctl specification.
-.El
 .Sh SEE ALSO
-.Xr ioctl 2 ,
-.Xr grf 4
+.Xr wsdisplay 4 ,
+.Xr wscons 4
diff -r 693585aaa9fb -r 8effe6250b95 share/man/man4/man4.hp300/hyper.4
--- a/share/man/man4/man4.hp300/hyper.4 Wed Feb 09 13:41:00 2011 +0000
+++ b/share/man/man4/man4.hp300/hyper.4 Wed Feb 09 14:13:09 2011 +0000
@@ -1,4 +1,4 @@
-.\"     $NetBSD: hyper.4,v 1.3 2008/04/30 13:10:56 martin Exp $
+.\"     $NetBSD: hyper.4,v 1.4 2011/02/09 14:13:09 tsutsui Exp $
 .\"
 .\" Copyright (c) 2001 The NetBSD Foundation, Inc.
 .\" All rights reserved.
@@ -27,7 +27,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd September 10, 2001
+.Dd February 9, 2011
 .Dt HYPER 4 hp300
 .Os
 .Sh NAME
@@ -37,8 +37,9 @@
 ``Hyperion'' graphics device interface
 .Sh SYNOPSIS
 .Cd "hyper* at dio? scode ?"
+.Cd "wsdisplay* at hyper?"
 .Sh DESCRIPTION
Prev by Date: [src/trunk]: src/distrib/sets/lists Add lists for ews4800mips and hp300 Xorg ...
Next by Date: [src/trunk]: src/tests/lib Add test which checks rumpclient does not use fds ...
Previous by Thread: [src/trunk]: src/distrib/sets/lists Add lists for ews4800mips and hp300 Xorg ...
Next by Thread: [src/trunk]: src/tests/lib Add test which checks rumpclient does not use fds ...
Indexes:
Home | Main Index | Thread Index | Old Index