Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/share/man/man4/man4.sandpoint Introduce nhpow(4) man page.



details:   https://anonhg.NetBSD.org/src/rev/2ce81601f147
branches:  trunk
changeset: 772769:2ce81601f147
user:      phx <phx%NetBSD.org@localhost>
date:      Sun Jan 15 14:40:15 2012 +0000

description:
Introduce nhpow(4) man page.

diffstat:

 share/man/man4/man4.sandpoint/Makefile |    4 +-
 share/man/man4/man4.sandpoint/nhpow.4  |  135 +++++++++++++++++++++++++++++++++
 2 files changed, 137 insertions(+), 2 deletions(-)

diffs (152 lines):

diff -r 77ffacee9e01 -r 2ce81601f147 share/man/man4/man4.sandpoint/Makefile
--- a/share/man/man4/man4.sandpoint/Makefile    Sun Jan 15 14:35:56 2012 +0000
+++ b/share/man/man4/man4.sandpoint/Makefile    Sun Jan 15 14:40:15 2012 +0000
@@ -1,7 +1,7 @@
 #      from: @(#)Makefile      8.2 (Berkeley) 2/16/94
-#      $NetBSD: Makefile,v 1.1 2011/01/26 11:25:51 nisimura Exp $
+#      $NetBSD: Makefile,v 1.2 2012/01/15 14:40:15 phx Exp $
 
-MAN=   satmgr.4
+MAN=   nhpow.4 satmgr.4
 MLINKS=
 MANSUBDIR=/sandpoint
 
diff -r 77ffacee9e01 -r 2ce81601f147 share/man/man4/man4.sandpoint/nhpow.4
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/share/man/man4/man4.sandpoint/nhpow.4     Sun Jan 15 14:40:15 2012 +0000
@@ -0,0 +1,135 @@
+.\" $NetBSD: nhpow.4,v 1.1 2012/01/15 14:40:15 phx Exp $
+.\"
+.\" Copyright (c) 2012 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This code is derived from software contributed to The NetBSD Foundation
+.\" by Frank Wille.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 15, 2012
+.Dt NHPOW 4 sandpoint
+.Os
+.Sh NAME
+.Nm nhpow
+.Nd driver for the NH-230/231 board control GPIO pins
+.Sh SYNOPSIS
+.Cd "nhpow0 at mainbus0"
+.Cd "gpio* at nhpow0"
+.Sh DESCRIPTION
+This driver initializes the LEDs and the fan speed during boot and
+establishes a reboot and power-off hook in the kernel.
+.Pp
+.Nm
+also detects a soft power-off condition, which is triggered by holding
+the front panel power button pressed for several seconds.
+This driver can optionally invoke
+.Xr powerd 8
+to get a finer control over the system shutdown procedure.
+It is capable of reporting a power-button-pressed event.
+Refer to the
+.Xr powerd 8
+manual section for more details.
+.Pp
+The
+.Nm
+driver provides access to its 8 bidirectional GPIO pins through the
+.Xr gpio 4
+controller interface.
+The pins have the following meaning when being written:
+.Bl -column "Pin" "Active level" "Function" -offset indent
+.It Sy "Pin" Ta Sy "Active level" Ta Sy "Function"
+.It Li "0" Ta "high" Ta "System power off"
+.It Li "1" Ta "high" Ta "Assert system reset to all devices"
+.It Li "2" Ta "low"  Ta "Status LED"
+.It Li "3" Ta "high" Ta "High speed fan"
+.It Li "4" Ta "low"  Ta "Debug LED 1"
+.It Li "5" Ta "low"  Ta "Debug LED 2"
+.It Li "6" Ta "low"  Ta "USB port 1 LED"
+.It Li "7" Ta "low"  Ta "USB port 2 LED"
+.El
+.Pp
+When reading, the pins have the following meaning:
+.Bl -column "Pin" "Active level" "Function" -offset indent
+.It Sy "Pin" Ta Sy "Active level" Ta Sy "Function"
+.It Li "0" Ta "low"  Ta "Power button pressed"
+.It Li "1" Ta "low"  Ta "Reset/install button pressed"
+.It Li "4" Ta "high" Ta "H/W version bit 0"
+.It Li "5" Ta "high" Ta "H/W version bit 1"
+.It Li "6" Ta "high" Ta "H/W version bit 2"
+.It Li "7" Ta "high" Ta "H/W version bit 3"
+.El
+.Pp
+.Nm
+attaches automatically for all
+.Tn NH-230/231
+compatible products:
+.Bl -bullet -compact
+.It
+Allnet 6250
+.It
+Allnet 6260
+.It
+Encore ENNHD-1000
+.It
+Fujitsu-Siemens AMS150
+.It
+Fujitsu-Siemens SBLAN2
+.It
+Longshine LCS-8311
+.It
+Netronix NH-230
+.It
+Netronix NH-231
+.It
+Planex NAS-01G
+.El
+.Sh SYSCTL VARIABLES
+The following
+.Xr sysctl 3
+variables are available:
+.Bl -tag -width indent
+.It machdep.nhpow.fan
+Sets the fan speed to high (1) or low (0).
+.El
+.Sh FILES
+.Bl -tag -width /dev/powerX -compact
+.It Pa /dev/power
+event notify channel to
+.Xr powerd 8 .
+.El
+.Sh SEE ALSO
+.Xr gpio 4 ,
+.Xr gpioctl 8 ,
+.Xr powerd 8 ,
+.Xr sysctl 8
+.Sh HISTORY
+The
+.Nm
+driver first appeared in
+.Nx 6.0 .
+.Sh AUTHORS
+The
+.Nm
+driver was written by
+.An Frank Wille .



Home | Main Index | Thread Index | Old Index