Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/netbsd-6]: src/distrib/common/bootimage Pull up following revision(s) (r...



details:   https://anonhg.NetBSD.org/src/rev/7d00665cf8c5
branches:  netbsd-6
changeset: 774082:7d00665cf8c5
user:      riz <riz%NetBSD.org@localhost>
date:      Wed May 09 19:58:27 2012 +0000

description:
Pull up following revision(s) (requested by tsutsui in ticket #235):
        distrib/common/bootimage/Makefile.bootimage: revision 1.5
Add two optional variables for liveimage/installimage builds:
---
        MBR_BOOTCODE
                optional MBR bootcode which should be installed by fdisk(8)
                (default: empty)
                - specified MBR_BOOTCODE must exist in ${DESTDIR}/usr/mdec
                - if MBR_BOOTCODE is not specified,
                  MBR_DEFAULT_BOOTCODE (default: mbr) will be used
                  if the target ${MACHINE} has the one in /usr/mdec
        INSTALLBOOTOPTIONS
                options passed to installboot(8), e.g., -o console=com0
                (default: empty)
---
Proposed by Brook Milligan on current-users@:
http://mail-index.NetBSD.org/current-users/2012/04/16/msg019892.html
Also make USE_MBR work on ${MACHINE}s which don't have the default
/usr/mdec/mbr bootcode. (no such port has the liveimage target yet though)
XXX: tools fdisk(8) implicitly uses host's /usr/mdec/mbr for the default
XXX: bootcode even for non-x86 targets if host is x86

diffstat:

 distrib/common/bootimage/Makefile.bootimage |  40 ++++++++++++++++++++++++----
 1 files changed, 34 insertions(+), 6 deletions(-)

diffs (94 lines):

diff -r 2e1a8c7826b6 -r 7d00665cf8c5 distrib/common/bootimage/Makefile.bootimage
--- a/distrib/common/bootimage/Makefile.bootimage       Wed May 09 18:22:32 2012 +0000
+++ b/distrib/common/bootimage/Makefile.bootimage       Wed May 09 19:58:27 2012 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: Makefile.bootimage,v 1.3 2012/01/22 16:56:22 tsutsui Exp $
+#      $NetBSD: Makefile.bootimage,v 1.3.2.1 2012/05/09 19:58:27 riz Exp $
 #
 # Copyright (c) 2009, 2010, 2011 Izumi Tsutsui.  All rights reserved.
 #
@@ -40,6 +40,13 @@
 #      USE_MBR
 #              set yes if target disk image requires MBR partition
 #              (defautl: no)
+#      MBR_BOOTCODE
+#              optional MBR bootcode which should be installed by fdisk(8)
+#              (default: empty)
+#              - specified MBR_BOOTCODE must exist in ${DESTDIR}/usr/mdec
+#              - if MBR_BOOTCODE is not specified,
+#                MBR_DEFAULT_BOOTCODE (default: mbr) will be used
+#                if the target ${MACHINE} has the one in /usr/mdec
 #      USE_SUNLABEL
 #              set yes if target disk image requires Sun's label
 #              (default: no)
@@ -92,6 +99,9 @@
 #      IMGMAKEFSOPTIONS
 #              options passed to makefs(8) to create root file system
 #              (default: -o bsize=16384,fsize=2048,density=8192)
+#      INSTALLBOOTOPTIONS
+#              options passed to installboot(8), e.g., -o console=com0
+#              (default: empty)
 #      PRIMARY_BOOT
 #              primary boot loader that should be installed into
 #              the target image via installboot(8)
@@ -286,7 +296,7 @@
            ${IMGMAKEFSOPTIONS}                                         \
            ${WORKFS} ${WORKDIR}
 .if !empty(PRIMARY_BOOT) && ${INSTALLBOOT_AFTER_DISKLABEL} == "no"
-       ${TOOL_INSTALLBOOT} -vm ${MACHINE} ${WORKFS} \
+       ${TOOL_INSTALLBOOT} -v -m ${MACHINE} ${INSTALLBOOTOPTIONS} ${WORKFS} \
            ${WORKDIR}/usr/mdec/${PRIMARY_BOOT} ${SECONDARY_BOOT_ARG}
 .endif
        @echo done.
@@ -301,6 +311,8 @@
 DISKPROTO_IN?= ${DISTRIBDIR}/common/bootimage/diskproto.in
 .endif
 
+MBR_DEFAULT_BOOTCODE?= mbr
+
 OMIT_SWAPIMG?= no
 
 WORKMBR?=      work.mbr
@@ -328,14 +340,30 @@
        mv ${WORKLABEL}.tmp ${WORKLABEL}
 
 ${IMGBASE}.img:        ${TARGETFS} ${WORKLABEL}
-.if ${LABELSECTORS} != "0"
+.if ${USE_MBR} != "no"
        @echo creating MBR labels...
        ${DD} if=/dev/zero of=${WORKMBR} seek=$$((${IMAGESECTORS} - 1)) count=1
-       ${TOOL_FDISK} -f -u \
+       ${TOOL_FDISK} -f -i -u \
            -b ${MBRCYLINDERS}/${MBRHEADS}/${MBRSECTORS}                \
            -0 -a -s ${MBRNETBSD}/${FSOFFSET}/${BSDPARTSECTORS}         \
-           -i -c ${WORKDIR}/usr/mdec/mbr                               \
            -F ${WORKMBR}
+.if empty(MBR_BOOTCODE)
+       @if [ -f ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE} ]; then    \
+               echo ${TOOL_FDISK} -f                                   \
+                   -i -c ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE}   \
+                   -F ${WORKMBR};                                      \
+               ${TOOL_FDISK} -f                                        \
+                   -i -c ${WORKDIR}/usr/mdec/${MBR_DEFAULT_BOOTCODE}   \
+                   -F ${WORKMBR};                                      \
+       fi
+.else
+       @if [ ! -f ${WORKDIR}/usr/mdec/${MBR_BOOTCODE} ]; then          \
+               echo "${MBR_BOOTCODE} is not found in DESTDIR/usr/mdec, aborting"; \
+               false;                                                  \
+       fi
+       ${TOOL_FDISK} -f -i -c ${WORKDIR}/usr/mdec/${MBR_BOOTCODE}      \
+           -F ${WORKMBR}
+.endif
        ${DD} if=${WORKMBR} count=${LABELSECTORS} |                     \
            ${CAT} - ${TARGETFS} > ${WORKIMG}
 .else
@@ -354,7 +382,7 @@
 .endif
        ${TOOL_DISKLABEL} -R -F ${WORKIMG} ${WORKLABEL}
 .if !empty(PRIMARY_BOOT) && ${INSTALLBOOT_AFTER_DISKLABEL} != "no"
-       ${TOOL_INSTALLBOOT}  -vm ${MACHINE} ${WORKIMG}                  \
+       ${TOOL_INSTALLBOOT} -v -m ${MACHINE} ${INSTALLBOOTOPTOINS} ${WORKIMG} \
            ${WORKDIR}/usr/mdec/${PRIMARY_BOOT}
 .endif
        mv ${WORKIMG} ${.TARGET}



Home | Main Index | Thread Index | Old Index