Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/mips/rmi - add register & bit defines for GPIO, Per...
details: https://anonhg.NetBSD.org/src/rev/038f594b15e4
branches: trunk
changeset: 763364:038f594b15e4
user: cliff <cliff%NetBSD.org@localhost>
date: Fri Mar 18 00:58:35 2011 +0000
description:
- add register & bit defines for GPIO, Peripherals IO Bus, Flash, NAND
diffstat:
sys/arch/mips/rmi/rmixlreg.h | 198 ++++++++++++++++++++++++++++++++++++++++--
1 files changed, 186 insertions(+), 12 deletions(-)
diffs (277 lines):
diff -r 8d801eb35658 -r 038f594b15e4 sys/arch/mips/rmi/rmixlreg.h
--- a/sys/arch/mips/rmi/rmixlreg.h Fri Mar 18 00:57:51 2011 +0000
+++ b/sys/arch/mips/rmi/rmixlreg.h Fri Mar 18 00:58:35 2011 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: rmixlreg.h,v 1.3 2011/02/20 07:48:37 matt Exp $ */
+/* $NetBSD: rmixlreg.h,v 1.4 2011/03/18 00:58:35 cliff Exp $ */
/*-
* Copyright (c) 2009 The NetBSD Foundation, Inc.
@@ -262,7 +262,7 @@
#define RMIXL_IO_DEV_I2C_1 0x16000 /* I2C_1 */
#define RMIXL_IO_DEV_I2C_2 0x17000 /* I2C_2 */
#define RMIXL_IO_DEV_GPIO 0x18000 /* GPIO */
-#define RMIXL_IO_DEV_FLASH 0x19000 /* Flash ROM */
+#define RMIXL_IO_DEV_FLASH 0x19000 /* Peripherals IO Bus, to Flash memory &etc. */
#define RMIXL_IO_DEV_DMA 0x1a000 /* DMA */
#define RMIXL_IO_DEV_L2 0x1b000 /* L2 Cache */
#define RMIXL_IO_DEV_TB 0x1c000 /* Trace Buffer */
@@ -303,9 +303,11 @@
#define RMIXL_SBC_DRAM_CHNBD_DTR(n) _RMIXL_OFFSET(0x010 + (n))
/* DRAM Region Channels B,D Address Translation Regs[0-7] */
#define RMIXL_SBC_DRAM_BRIDGE_CFG _RMIXL_OFFSET(0x18) /* SBC DRAM config reg */
+
+#define RMIXL_SBC_IO_BAR _RMIXL_OFFSET(0x19) /* I/O Config Base Addr reg */
+#define RMIXL_SBC_FLASH_BAR _RMIXL_OFFSET(0x1a) /* Flash Memory Base Addr reg */
+
#if defined(MIPS64_XLR)
-#define RMIXLR_SBC_IO_BAR _RMIXL_OFFSET(0x19) /* I/O Config Base Addr reg */
-#define RMIXLR_SBC_FLASH_BAR _RMIXL_OFFSET(0x1a) /* Flash Memory Base Addr reg */
#define RMIXLR_SBC_SRAM_BAR _RMIXL_OFFSET(0x1b) /* SRAM Base Addr reg */
#define RMIXLR_SBC_HTMEM_BAR _RMIXL_OFFSET(0x1c) /* HyperTransport Mem Base Addr reg */
#define RMIXLR_SBC_HTINT_BAR _RMIXL_OFFSET(0x1d) /* HyperTransport Interrupt Base Addr reg */
@@ -319,8 +321,6 @@
#define RMIXLR_SBC_SYS2IO_CREDITS _RMIXL_OFFSET(0x35) /* System Bridge I/O Transaction Credits register */
#endif /* MIPS64_XLR */
#if defined(MIPS64_XLS)
-#define RMIXLS_SBC_IO_BAR _RMIXL_OFFSET(0x19) /* I/O Config Base Addr reg */
-#define RMIXLS_SBC_FLASH_BAR _RMIXL_OFFSET(0x20) /* Flash Memory Base Addr reg */
#define RMIXLS_SBC_PCIE_CFG_BAR _RMIXL_OFFSET(0x40) /* PCI Configuration BAR */
#define RMIXLS_SBC_PCIE_ECFG_BAR _RMIXL_OFFSET(0x41) /* PCI Extended Configuration BAR */
#define RMIXLS_SBC_PCIE_MEM_BAR _RMIXL_OFFSET(0x42) /* PCI Memory region BAR */
@@ -350,6 +350,19 @@
#define RMIXL_ADDR_ERR_BITERR_INT_EN _RMIXL_OFFSET(0x33) /* Bit Error intr enable */
/*
+ * RMIXL_SBC_FLASH_BAR bit defines
+ */
+#define RMIXL_FLASH_BAR_BASE __BITS(31,16) /* phys address bits 39:24 */
+#define RMIXL_FLASH_BAR_TO_BA(r) \
+ (((r) & RMIXL_FLASH_BAR_BASE) << (24 - 16))
+#define RMIXL_FLASH_BAR_MASK __BITS(15,5) /* phys address mask bits 34:24 */
+#define RMIXL_FLASH_BAR_TO_MASK(r) \
+ (((((r) & RMIXL_FLASH_BAR_MASK)) << (24 - 5)) | __BITS(23, 0))
+#define RMIXL_FLASH_BAR_RESV __BITS(4,1) /* (reserved) */
+#define RMIXL_FLASH_BAR_ENB __BIT(0) /* 1=Enable */
+#define RMIXL_FLASH_BAR_MASK_MAX RMIXL_FLASH_BAR_TO_MASK(RMIXL_FLASH_BAR_MASK)
+
+/*
* RMIXL_SBC_DRAM_BAR bit defines
*/
#define RMIXL_DRAM_BAR_BASE_ADDR __BITS(31,16) /* bits 39:24 of Base Address */
@@ -429,7 +442,6 @@
#define RMIXL_PCIX_IO_BAR(ba, en) \
((uint32_t)(((ba) >> (26 - 18)) | ((en) ? RMIXL_PCIX_IO_BAR_ENB : 0)))
-
/*
* RMIXLS_SBC_PCIE_CFG_BAR bit defines
*/
@@ -563,18 +575,92 @@
/*
* GPIO Controller registers
+ * bit number is same as GPIO pin number for the GPIO masks below
*/
+#define RMIXL_GPIO_NSIGNALS 25 /* 25 GPIO signals supported in HW */
+
/* GPIO Signal Registers */
#define RMIXL_GPIO_INT_ENB _RMIXL_OFFSET(0x0) /* Interrupt Enable register */
#define RMIXL_GPIO_INT_INV _RMIXL_OFFSET(0x1) /* Interrupt Inversion register */
#define RMIXL_GPIO_IO_DIR _RMIXL_OFFSET(0x2) /* I/O Direction register */
#define RMIXL_GPIO_OUTPUT _RMIXL_OFFSET(0x3) /* Output Write register */
-#define RMIXL_GPIO_INPUT _RMIXL_OFFSET(0x4) /* Intput Read register */
-#define RMIXL_GPIO_INT_CLR _RMIXL_OFFSET(0x5) /* Interrupt Inversion register */
-#define RMIXL_GPIO_INT_STS _RMIXL_OFFSET(0x6) /* Interrupt Status register */
+#define RMIXL_GPIO_INPUT _RMIXL_OFFSET(0x4) /* Intput Read register *//* ro */
+#define RMIXL_GPIO_INT_CLR _RMIXL_OFFSET(0x5) /* Interrupt Clear register */
+#define RMIXL_GPIO_INT_STS _RMIXL_OFFSET(0x6) /* Interrupt Status register *//* ro */
#define RMIXL_GPIO_INT_TYP _RMIXL_OFFSET(0x7) /* Interrupt Type register */
-#define RMIXL_GPIO_RESET _RMIXL_OFFSET(0x8) /* XLS Soft Reset register */
+#define RMIXL_GPIO_RESET _RMIXL_OFFSET(0x8) /* XLR/XLS Soft Reset register */
+
+
+/*
+ * common GPIO bit masks
+ */
+#define RMIXL_GPIO_PGM_MASK (__BITS(13,0) | __BITS(22,20) | __BIT(24)) /* programmable pins */
+#define RMIXL_GPIO_INTR_MASK (__BITS(13,0) | __BITS(24,20)) /* intr-capable pins */
+
+/*
+ * never-programmable fixed-function GPIO signals
+ * bit number is same as GPIO pin
+ */
+#define RMIXL_GPIO_FLASH_CPUID __BITS(16,14) /* Flash CPU ID, output only */
+#define RMIXL_GPIO_FLASH_CPUID_SHFT 14
+#define RMIXL_GPIO_FLASH_RDY __BIT(17) /* Flash memory ready, input only */
+#define RMIXL_GPIO_FLASH_ADV __BIT(18) /* Flash memory address valid, output only */
+#define RMIXL_GPIO_FLASH_RESET_N __BIT(19) /* Flash memory reset, output only */
+#define RMIXL_GPIO_THERMAL_INTRPT __BIT(23) /* Thermal interrupt, interrupt only */
+
+/*
+ * RMIXL_GPIO_INT_ENB bits
+ */
+#define RMIXL_GPIO_INT_ENB_MASK RMIXL_GPIO_INTR_MASK
+
+/*
+ * RMIXL_GPIO_INT_INV bits
+ * inversion control is possible only on the programmable pins
+ */
+#define RMIXL_GPIO_INT_INV_MASK RMIXL_GPIO_PGM_MASK
+
+/*
+ * RMIXL_GPIO_IO_DIR bits
+ * direction control is possible only on the programmable pins
+ */
+#define RMIXL_GPIO_IO_DIR_MASK RMIXL_GPIO_PGM_MASK
+
+/*
+ * RMIXL_GPIO_OUTPUT bits
+ * output is possible only on the programmable pins and fixed-function outputs
+ */
+#define RMIXL_GPIO_OUTPUT_MASK (RMIXL_GPIO_PGM_MASK \
+ | RMIXL_GPIO_FLASH_ADV \
+ | RMIXL_GPIO_FLASH_RESET_N)
+
+/*
+ * RMIXL_GPIO_INPUT bits
+ * input is possible only on the programmable pins and fixed-function inputs & interrupts
+ */
+#define RMIXL_GPIO_INPUT_MASK (RMIXL_GPIO_PGM_MASK \
+ | RMIXL_GPIO_FLASH_RDY \
+ | RMIXL_GPIO_THERMAL_INTRPT)
+
+/*
+ * RMIXL_GPIO_INT_CLR bits
+ */
+#define RMIXL_GPIO_INT_CLR_MASK RMIXL_GPIO_INTR_MASK
+
+/*
+ * RMIXL_GPIO_INT_STS bits
+ */
+#define RMIXL_GPIO_INT_STS_INT_HI_L __BIT(25) /* INT_HI_L (input) requested */
+#define RMIXL_GPIO_INT_STS_INT_LO_L __BIT(26) /* INT_LO_L (input) requested */
+#define RMIXL_GPIO_INT_STS_MASK (RMIXL_GPIO_INTR_MASK \
+ | RMIXL_GPIO_INT_STS_INT_LO_L \
+ | RMIXL_GPIO_INT_STS_INT_HI_L)
+
+/*
+ * RMIXL_GPIO_INT_TYP bits
+ * 0=Edge, 1=Level
+ */
+#define RMIXL_GPIO_INT_TYP_MASK RMIXL_GPIO_INTR_MASK
/*
* RMIXL_GPIO_RESET bits
@@ -632,7 +718,7 @@
*/
#define RMIXL_GPIO_RESET_CFG_BIST_DIAG_EN __BIT(18) /* BIST Diagnostics enable */
#define RMIXL_GPIO_RESET_CFG_BIST_RUN_EN __BIT(18) /* BIST Run enable */
-#define RMIXL_GPIO_RESET_CFG_NOOT_NAND __BIT(16) /* Enable boot from NAND Flash */
+#define RMIXL_GPIO_RESET_CFG_BOOT_NAND __BIT(16) /* Enable boot from NAND Flash */
#define RMIXL_GPIO_RESET_CFG_BOOT_PCMCIA __BIT(15) /* Enable boot from PCMCIA */
#define RMIXL_GPIO_RESET_CFG_FLASH_CFG __BIT(14) /* Flash 32-bit Data Configuration:
* 0 = 32-bit address / 16-bit data
@@ -645,6 +731,15 @@
#define RMIXL_GPIO_RESET_CFG_PLL1_FB_DIV __BITS(7,0) /* PLL1 Feedback Divider */
/*
+ * RMIXL_GPIO_EXT_INT bits
+ */
+#define RMIXL_GPIO_EXT_INT_RESV __BITS(31,4)
+#define RMIXL_GPIO_EXT_INT_HI_MASK __BIT(3) /* mask (input) INT_HI_L */
+#define RMIXL_GPIO_EXT_INT_LO_MASK __BIT(2) /* mask (input) INT_HI_L */
+#define RMIXL_GPIO_EXT_INT_HI_CTL __BIT(1) /* generate (output) INT_HI_L */
+#define RMIXL_GPIO_EXT_INT_LO_CTL __BIT(0) /* generate (output) INT_LO_L */
+
+/*
* RMIXL_GPIO_LOW_PWR_DIS bits
* except as noted, all bits are:
* 0 = feature enable (default)
@@ -666,6 +761,85 @@
*/
#define RMIXL_GPIO_LOW_PWR_DIS_RESV __BITS(31,9)
+/*
+ * Peripheral I/O bus (Flash/PCMCIA) controller registers
+ */
+#define RMIXL_FLASH_NCS 10 /* number of chip selects */
+#define RMIXL_FLASH_CS_BOOT 0 /* CS0 is boot flash */
+#define RMIXL_FLASH_CS_PCMCIA_CF 6 /* CS6 is PCMCIA compact flash */
+#define RMIXL_FLASH_CSBASE_ADDRn(n) _RMIXL_OFFSET(0x00+(n)) /* CSn Base Address reg */
+#define RMIXL_FLASH_CSADDR_MASKn(n) _RMIXL_OFFSET(0x10+(n)) /* CSn Address Mask reg */
+#define RMIXL_FLASH_CSDEV_PARMn(n) _RMIXL_OFFSET(0x20+(n)) /* CSn Device Parameter reg */
+#define RMIXL_FLASH_CSTIME_PARMAn(n) _RMIXL_OFFSET(0x30+(n)) /* CSn Timing Parameters A reg */
+#define RMIXL_FLASH_CSTIME_PARMBn(n) _RMIXL_OFFSET(0x40+(n)) /* CSn Timing Parameters B reg */
+#define RMIXL_FLASH_INT_MASK _RMIXL_OFFSET(0x50) /* Flash Interrupt Mask reg */
+#define RMIXL_FLASH_INT_STATUS _RMIXL_OFFSET(0x60) /* Flash Interrupt Status reg */
+#define RMIXL_FLASH_ERROR_STATUS _RMIXL_OFFSET(0x70) /* Flash Error Status reg */
+#define RMIXL_FLASH_ERROR_ADDR _RMIXL_OFFSET(0x80) /* Flash Error Address reg */
+
+/*
+ * RMIXL_FLASH_CSDEV_PARMn bits
+ */
+#define RMIXL_FLASH_CSDEV_RESV __BITS(31,16)
+#define RMIXL_FLASH_CSDEV_BFN __BIT(15) /* Boot From Nand
+ * 0=Boot from NOR or
+ * PCCard Type 1 Flash
+ * 1=Boot from NAND
+ */
+#define RMIXL_FLASH_CSDEV_NANDEN __BIT(14) /* NAND Flash Enable
+ * 0=NOR
+ * 1=NAND
+ */
+#define RMIXL_FLASH_CSDEV_ADVTYPE __BIT(13) /* Add Valid Sensing Type
+ * 0=level
+ * 1=pulse
+ */
+#define RMIXL_FLASH_CSDEV_PARITY_TYPE __BIT(12) /* Parity Type
+ * 0=even
+ * 1=odd
+ */
+#define RMIXL_FLASH_CSDEV_PARITY_EN __BIT(11) /* Parity Enable */
+#define RMIXL_FLASH_CSDEV_GENIF_EN __BIT(10) /* Generic PLD/FPGA interface mode
+ * if this bit is set, then
+ * GPIO[13:10] cannot be used
+ * for interrupts
+ */
+#define RMIXL_FLASH_CSDEV_PCMCIA_EN __BIT(9) /* PCMCIA Interface mode */
+#define RMIXL_FLASH_CSDEV_DWIDTH __BITS(8,7) /* Data Bus Width:
+ * 00: 8 bit
+ * 01: 16 bit
+ * 10: 32 bit
+ * 11: 8 bit
+ */
+#define RMIXL_FLASH_CSDEV_DWIDTH_SHFT 7
+#define RMIXL_FLASH_CSDEV_MX_ADDR __BIT(6) /* Multiplexed Address
+ * 0: non-muxed
+ * AD[31:24] = Data,
+ * AD[23:0] = Addr
+ * 1: muxed
+ * External latch required
+ */
+#define RMIXL_FLASH_CSDEV_WAIT_POL __BIT(5) /* WAIT polarity
+ * 0: Active high
+ * 1: Active low
+ */
+#define RMIXL_FLASH_CSDEV_WAIT_EN __BIT(4) /* Enable External WAIT Ack mode */
+#define RMIXL_FLASH_CSDEV_BURST __BITS(3,1) /* Burst Length:
+ * 000: 2x
+ * 001: 4x
+ * 010: 8x
+ * 011: 16x
+ * 100: 32x
+ */
+#define RMIXL_FLASH_CSDEV_BURST_SHFT 1
+#define RMIXL_FLASH_CSDEV_BURST_EN __BITS(0) /* Burst Enable */
+
+
+/*
+ * NAND Flash Memory Control registers
+ */
+#define RMIXL_NAND_CLEn(n) _RMIXL_OFFSET(0x90+(n)) /* CSn 8-bit CLE command value reg */
+#define RMIXL_NAND_ALEn(n) _RMIXL_OFFSET(0xa0+(n)) /* CSn 8-bit ALE address phase reg */
/*
* PCIE Interface Controller registers
Home |
Main Index |
Thread Index |
Old Index