[src/trunk]: src/sys/dev/isa Newer PC Engines BIOS versions don't set up the ...

[ad <ad%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/17337286a7a3
branches:  trunk
changeset: 746453:17337286a7a3
user:      ad <ad%NetBSD.org@localhost>
date:      Wed Apr 01 18:34:22 2020 +0000

description:
Newer PC Engines BIOS versions don't set up the Super I/O for GPIO the
way we want so ignore most of the existing settings and enable banks 0
and 1.

diffstat:

 sys/dev/isa/nct.c |  54 +++++++++++++++++++++---------------------------------
 1 files changed, 21 insertions(+), 33 deletions(-)

diffs (139 lines):

diff -r 69751fc2ac78 -r 17337286a7a3 sys/dev/isa/nct.c
--- a/sys/dev/isa/nct.c Wed Apr 01 15:57:46 2020 +0000
+++ b/sys/dev/isa/nct.c Wed Apr 01 18:34:22 2020 +0000
@@ -1,7 +1,7 @@
-/*     $NetBSD: nct.c,v 1.2 2019/11/16 15:38:43 martin Exp $   */
+/*     $NetBSD: nct.c,v 1.3 2020/04/01 18:34:22 ad Exp $       */
 
 /*-
- * Copyright (c) 2019 The NetBSD Foundation, Inc.
+ * Copyright (c) 2019, 2020 The NetBSD Foundation, Inc.
  * All rights reserved.
  *
  * This code is derived from software contributed to The NetBSD Foundation
@@ -37,14 +37,14 @@
  * - UARTS: handled by com driver.  3rd & 4th UARTs use GPIO pins.
  *
  * If asked to probe with a wildcard address, we'll only do so if known to
- * be running on a PC Engines APU board.  Probe is invasive.
+ * be running on a PC Engines system.  Probe is invasive.
  *
  * Register access on Super I/O chips typically involves one or two levels
  * of indirection, so we try hard to avoid needless register access.
  */
 
 #include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: nct.c,v 1.2 2019/11/16 15:38:43 martin Exp $");
+__KERNEL_RCSID(0, "$NetBSD: nct.c,v 1.3 2020/04/01 18:34:22 ad Exp $");
 
 #include <sys/param.h>
 #include <sys/systm.h>
@@ -69,7 +69,7 @@
 #define        NCT_IOBASE_B            0x4e
 #define        NCT_IOSIZE              2
 #define        NCT_CHIP_ID_1           0x1061
-#define        NCT_CHIP_ID_2           0xc452  /* PC Engines APU1 */
+#define        NCT_CHIP_ID_2           0xc452  /* PC Engines APU */
 #define        NCT_NUM_PINS            17
 
 /* Enable/disable keys */
@@ -241,20 +241,18 @@
        int nioaddr, i;
        u_int8_t low, high;
        u_int16_t id;
-       const char *vendor, *product;
+       const char *vendor;
 
        /*
         * Allow override of I/O base address.  If no I/O base address is
-        * provided, proceed to probe if running on a PC Engines APU.
+        * provided, proceed to probe if running on a PC Engines system.
         */
        if (ia->ia_nio > 0 && ia->ia_io[0].ir_addr != ISA_UNKNOWN_PORT) {
                ioaddrs[0] = ia->ia_io[0].ir_addr;
                nioaddr = 1;
        } else {
                vendor = pmf_get_platform("system-vendor");
-               product = pmf_get_platform("system-product");
-               if (vendor != NULL && strcmp(vendor, "PC Engines") == 0 &&
-                   product != NULL && strcmp(product, "APU") == 0) {
+               if (vendor != NULL && strstr(vendor, "PC Engines") != NULL) {
                        nioaddr = __arraycount(ioaddrs);
                } else {
                        nioaddr = 0;
@@ -305,7 +303,6 @@
        struct gpiobus_attach_args gba;
        struct nct_bank *nb;
        u_int8_t multifun, enable;
-       bool apu;
        int i, j;
 
        /*
@@ -321,8 +318,6 @@
        sc->sc_iot = ia->ia_iot;
        sc->sc_curdev = -1;
        sc->sc_curreg = -1;
-       apu = ((strcmp(pmf_get_platform("system-vendor"), "PC Engines") |
-           strcmp(pmf_get_platform("system-product"), "APU")) == 0);
 
         /*
          * All pin access is funneled through a common, indirect register
@@ -342,45 +337,38 @@
         nct_wr(sc, LD8_DEVCFG, 0);
 
        /*
-        * Fill out descriptions of GPIO0, GPIO1 and GPIO67.
-        * Determine which banks and pins are enabled.
+        * The BIOS doesn't set things up the way we want.  Pfft.
+        * Enable all GPIO0/GPIO1 pins.
         */
        multifun = nct_rd(sc, GD_MULTIFUN);
-       enable = nct_rd(sc, LD7_ENABLE);
+       nct_wr(sc, GD_MULTIFUN,
+           multifun & ~(GD_MULTIFUN_GPIO0 | GD_MULTIFUN_GPIO1));
+       nct_wr(sc, LDA_UARTC_ENABLE, 0);
+       nct_wr(sc, LD8_GPIO0_MULTIFUNC, 0);
+       nct_wr(sc, LDB_UARTD_ENABLE, 0);
+       nct_wr(sc, LD8_GPIO1_MULTIFUNC, 0);
+       multifun = nct_rd(sc, GD_MULTIFUN);
+       enable = nct_rd(sc, LD7_ENABLE) | LD7_ENABLE_GPIO0 | LD7_ENABLE_GPIO1;
 
        nb = &sc->sc_bank[0];
        nb->nb_firstpin = 0;
        nb->nb_numpins = 8;
+       nb->nb_enabled = 0xff;
        nb->nb_reg_dir = LD7_GPIO0_DIRECTION;
        nb->nb_reg_data = LD7_GPIO0_DATA;
        nb->nb_reg_inv = LD7_GPIO0_INVERSION;
        nb->nb_reg_stat = LD7_GPIO0_STATUS;
        nb->nb_reg_mode = LDF_GPIO0_OUTMODE;
-       if ((multifun & GD_MULTIFUN_GPIO0) == 0 &&
-           ((nct_rd(sc, LDA_UARTC_ENABLE) & 1) == 0 || apu)) {
-               nct_wr(sc, LD8_GPIO0_MULTIFUNC, 0);
-               nb->nb_enabled = 0xff;
-               enable |= LD7_ENABLE_GPIO0;
-       } else {
-               sc->sc_bank[0].nb_enabled = 0;
-       }
-               
+
        nb = &sc->sc_bank[1];
        nb->nb_firstpin = 8;
        nb->nb_numpins = 8;
+       nb->nb_enabled = 0xff;
        nb->nb_reg_dir = LD7_GPIO1_DIRECTION;
        nb->nb_reg_data = LD7_GPIO1_DATA;
        nb->nb_reg_inv = LD7_GPIO1_INVERSION;
        nb->nb_reg_stat = LD7_GPIO1_STATUS;
        nb->nb_reg_mode = LDF_GPIO1_OUTMODE;
-       if ((multifun & GD_MULTIFUN_GPIO1) == 0 &&
-           (nct_rd(sc, LDB_UARTD_ENABLE) & 1) == 0) {
-               nct_wr(sc, LD8_GPIO1_MULTIFUNC, 0);
-               nb->nb_enabled = 0xff;
-               enable |= LD7_ENABLE_GPIO1;
-       } else {
-               sc->sc_bank[1].nb_enabled = 0;
-       }
 
        nb = &sc->sc_bank[2];
        nb->nb_firstpin = 16;