Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-9]: src/sys/dev/usb Pull up following revision(s) (requested by r...
details: https://anonhg.NetBSD.org/src/rev/efbb4fec6b15
branches: netbsd-9
changeset: 744788:efbb4fec6b15
user: martin <martin%NetBSD.org@localhost>
date: Wed Feb 12 20:05:58 2020 +0000
description:
Pull up following revision(s) (requested by riastradh in ticket #704):
sys/dev/usb/uatp.c: revision 1.20
sys/dev/usb/uatp.c: revision 1.21
sys/dev/usb/uatp.c: revision 1.22
sys/dev/usb/uatp.c: revision 1.23
Work around quirk of Fountain and Geyser 1 trackpads.
Sometimes they get desynchronized, but we know the last packet is a
17-byte packet, so if we get one early then stop here.
Tested by macallan on an iBook and a PowerBook. This code path
shouldn't break anything on MacBooks because they have different
total numbers of sensors so this branch won't be reached.
Downgrade noisy message from aprint_verbose to DPRINTF.
Unconditionally enable UATP_DEBUG.
Use __BIT.
diffstat:
sys/dev/usb/uatp.c | 72 ++++++++++++++++++++++++++++++++++-------------------
1 files changed, 46 insertions(+), 26 deletions(-)
diffs (121 lines):
diff -r 4392bf588840 -r efbb4fec6b15 sys/dev/usb/uatp.c
--- a/sys/dev/usb/uatp.c Wed Feb 12 20:02:19 2020 +0000
+++ b/sys/dev/usb/uatp.c Wed Feb 12 20:05:58 2020 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: uatp.c,v 1.19 2019/01/22 06:47:20 skrll Exp $ */
+/* $NetBSD: uatp.c,v 1.19.4.1 2020/02/12 20:05:58 martin Exp $ */
/*-
* Copyright (c) 2011-2014 The NetBSD Foundation, Inc.
@@ -146,7 +146,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: uatp.c,v 1.19 2019/01/22 06:47:20 skrll Exp $");
+__KERNEL_RCSID(0, "$NetBSD: uatp.c,v 1.19.4.1 2020/02/12 20:05:58 martin Exp $");
#ifdef _KERNEL_OPT
#include "opt_usb.h"
@@ -184,22 +184,29 @@
} \
} while (0)
-#define UATP_DEBUG_ATTACH (1 << 0)
-#define UATP_DEBUG_MISC (1 << 1)
-#define UATP_DEBUG_WSMOUSE (1 << 2)
-#define UATP_DEBUG_IOCTL (1 << 3)
-#define UATP_DEBUG_RESET (1 << 4)
-#define UATP_DEBUG_INTR (1 << 5)
-#define UATP_DEBUG_PARSE (1 << 6)
-#define UATP_DEBUG_TAP (1 << 7)
-#define UATP_DEBUG_EMUL_BUTTON (1 << 8)
-#define UATP_DEBUG_ACCUMULATE (1 << 9)
-#define UATP_DEBUG_STATUS (1 << 10)
-#define UATP_DEBUG_SPURINTR (1 << 11)
-#define UATP_DEBUG_MOVE (1 << 12)
-#define UATP_DEBUG_ACCEL (1 << 13)
-#define UATP_DEBUG_TRACK_DIST (1 << 14)
-#define UATP_DEBUG_PALM (1 << 15)
+#define UATP_DEBUG_ATTACH __BIT(0)
+#define UATP_DEBUG_MISC __BIT(1)
+#define UATP_DEBUG_WSMOUSE __BIT(2)
+#define UATP_DEBUG_IOCTL __BIT(3)
+#define UATP_DEBUG_RESET __BIT(4)
+#define UATP_DEBUG_INTR __BIT(5)
+#define UATP_DEBUG_PARSE __BIT(6)
+#define UATP_DEBUG_TAP __BIT(7)
+#define UATP_DEBUG_EMUL_BUTTON __BIT(8)
+#define UATP_DEBUG_ACCUMULATE __BIT(9)
+#define UATP_DEBUG_STATUS __BIT(10)
+#define UATP_DEBUG_SPURINTR __BIT(11)
+#define UATP_DEBUG_MOVE __BIT(12)
+#define UATP_DEBUG_ACCEL __BIT(13)
+#define UATP_DEBUG_TRACK_DIST __BIT(14)
+#define UATP_DEBUG_PALM __BIT(15)
+
+/*
+ * Unconditionally enable the debug output so you don't have to
+ * recompile the kernel to diagnose it. This is not a high-throughput
+ * NIC driver or anything that will be hurt by a few conditionals.
+ */
+#define UATP_DEBUG 1
#if UATP_DEBUG
# define DPRINTF(sc, flags, format) do { \
@@ -239,9 +246,9 @@
#define UATP_MAX_MOTION_MULTIPLIER 16
/* Status bits transmitted in the last byte of an input packet. */
-#define UATP_STATUS_BUTTON (1 << 0) /* Button pressed */
-#define UATP_STATUS_BASE (1 << 2) /* Base sensor data */
-#define UATP_STATUS_POST_RESET (1 << 4) /* Post-reset */
+#define UATP_STATUS_BUTTON __BIT(0) /* Button pressed */
+#define UATP_STATUS_BASE __BIT(2) /* Base sensor data */
+#define UATP_STATUS_POST_RESET __BIT(4) /* Post-reset */
/* Forward declarations */
@@ -507,9 +514,9 @@
unsigned int sc_track_distance; /* Distance^2 finger has tracked,
* squared to avoid sqrt in kernel. */
uint32_t sc_status; /* Status flags: */
-#define UATP_ENABLED (1 << 0) /* . Is the wsmouse enabled? */
-#define UATP_DYING (1 << 1) /* . Have we been deactivated? */
-#define UATP_VALID (1 << 2) /* . Do we have valid sensor data? */
+#define UATP_ENABLED __BIT(0) /* . Is the wsmouse enabled? */
+#define UATP_DYING __BIT(1) /* . Have we been deactivated? */
+#define UATP_VALID __BIT(2) /* . Do we have valid sensor data? */
struct usb_task sc_reset_task; /* Task for resetting device. */
callout_t sc_untap_callout; /* Releases button after tap. */
@@ -1416,6 +1423,19 @@
(sc->sc_input_index + len));
sc->sc_input_index = 0;
return;
+ } else if (sc->sc_input_size == 81 && len == 17 &&
+ sc->sc_input_index != 64) {
+ /*
+ * Quirk of Fountain and Geyser 1 devices: a 17-byte
+ * packet seems to mean the last one, but sometimes we
+ * get desynchronized, so drop this one and start over
+ * if we see a 17-byte packet that's not at the end.
+ */
+ aprint_error_dev(uatp_dev(sc),
+ "discarding 17-byte nonterminal input at %u\n",
+ sc->sc_input_index);
+ sc->sc_input_index = 0;
+ return;
}
#if UATP_DEBUG
@@ -1433,8 +1453,8 @@
sc->sc_input_index += len;
if (sc->sc_input_index != sc->sc_input_size) {
/* Wait until packet is complete. */
- aprint_verbose_dev(uatp_dev(sc), "partial packet: %u bytes\n",
- len);
+ DPRINTF(sc, UATP_DEBUG_INTR, ("partial packet: %u bytes\n",
+ len));
return;
}
Home |
Main Index |
Thread Index |
Old Index