[src/trunk]: src/sbin/atactl Add some more attribute "names", taken from

[atatat <atatat%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/6c575cf447bb
branches:  trunk
changeset: 569856:6c575cf447bb
user:      atatat <atatat%NetBSD.org@localhost>
date:      Fri Sep 10 04:11:09 2004 +0000

description:
Add some more attribute "names", taken from

    http://freepgs.com/smart/attributes.php

which gets them from smartmontools as maintained by Bruce Allen.

Note that some of these attributes should be "named" differently
depending on the drive (point for future work?), but at least now
there are names for some of the one that were missing them.

diffstat:

 sbin/atactl/atactl.c |  51 +++++++++++++++++++++++++++++++++++++--------------
 1 files changed, 37 insertions(+), 14 deletions(-)

diffs (79 lines):

diff -r cbb9218956e1 -r 6c575cf447bb sbin/atactl/atactl.c
--- a/sbin/atactl/atactl.c      Fri Sep 10 03:43:52 2004 +0000
+++ b/sbin/atactl/atactl.c      Fri Sep 10 04:11:09 2004 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: atactl.c,v 1.31 2004/09/10 03:43:52 atatat Exp $       */
+/*     $NetBSD: atactl.c,v 1.32 2004/09/10 04:11:09 atatat Exp $       */
 
 /*-
  * Copyright (c) 1998 The NetBSD Foundation, Inc.
@@ -42,7 +42,7 @@
 #include <sys/cdefs.h>
 
 #ifndef lint
-__RCSID("$NetBSD: atactl.c,v 1.31 2004/09/10 03:43:52 atatat Exp $");
+__RCSID("$NetBSD: atactl.c,v 1.32 2004/09/10 04:11:09 atatat Exp $");
 #endif
 
 
@@ -197,17 +197,17 @@
        const char      *name;
        void (*special)(struct ata_smart_attr *, uint64_t);
 } smart_attrs[] = {
-       { 1,            "Raw read error rate" },
-       { 2,            "Throughput performance" },
-       { 3,            "Spin-up time" },
-       { 4,            "Start/stop count" },
-       { 5,            "Reallocated sector count" },
-       { 7,            "Seek error rate" },
-       { 8,            "Seek time performance" },
-       { 9,            "Power-on hours count" },
-       { 10,           "Spin retry count" },
-       { 11,           "Calibration retry count" },
-       { 12,           "Device power cycle count" },
+       {   1,          "Raw read error rate" },
+       {   2,          "Throughput performance" },
+       {   3,          "Spin-up time" },
+       {   4,          "Start/stop count" },
+       {   5,          "Reallocated sector count" },
+       {   7,          "Seek error rate" },
+       {   8,          "Seek time performance" },
+       {   9,          "Power-on hours count" },
+       {  10,          "Spin retry count" },
+       {  11,          "Calibration retry count" },
+       {  12,          "Device power cycle count" },
        { 191,          "Gsense error rate" },
        { 192,          "Power-off retract count" },
        { 193,          "Load cycle count" },
@@ -217,7 +217,30 @@
        { 197,          "Current pending sector" },
        { 198,          "Offline uncorrectable" },
        { 199,          "Ultra DMA CRC error count" },
-       { 0,            "Unknown" },
+       { 200,          "Write error rate" },
+       { 201,          "Soft read error rate" },
+       { 202,          "Data address mark errors" },
+       { 203,          "Run out cancel" },
+       { 204,          "Soft ECC correction" },
+       { 205,          "Thermal asperity check" },
+       { 206,          "Flying height" },
+       { 207,          "Spin high current" },
+       { 208,          "Spin buzz" },
+       { 209,          "Offline seek performance" },
+       { 220,          "Disk shift" },
+       { 221,          "G-Sense error rate" },
+       { 222,          "Loaded hours" },
+       { 223,          "Load/unload retry count" },
+       { 224,          "Load friction" },
+       { 225,          "Load/unload cycle count" },
+       { 226,          "Load-in time" },
+       { 227,          "Torque amplification count" },
+       { 228,          "Power-off retract count" },
+       { 230,          "GMR head amplitude" },
+       { 231,          "Temperature",                  device_smart_temp },
+       { 240,          "Head flying hours" },
+       { 250,          "Read error retry rate" },
+       {   0,          "Unknown" },
 };
 
 int