Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/gnu/dist/grep Remove some unneeded files.
details: https://anonhg.NetBSD.org/src/rev/36569cd31e25
branches: trunk
changeset: 542337:36569cd31e25
user: wiz <wiz%NetBSD.org@localhost>
date: Sun Jan 26 23:32:21 2003 +0000
description:
Remove some unneeded files.
diffstat:
gnu/dist/grep/.cvsignore | 13 -
gnu/dist/grep/autom4te-2.53.cache/output.0 | 10101 ---------------------------
gnu/dist/grep/autom4te-2.53.cache/requests | 94 -
gnu/dist/grep/autom4te-2.53.cache/traces.0 | 524 -
gnu/dist/grep/bootstrap/Makefile.am | 4 -
gnu/dist/grep/bootstrap/Makefile.in | 221 -
gnu/dist/grep/bootstrap/Makefile.try | 135 -
gnu/dist/grep/bootstrap/README | 8 -
gnu/dist/grep/doc/.cvsignore | 4 -
gnu/dist/grep/intl/.cvsignore | 1 -
gnu/dist/grep/lib/.cvsignore | 3 -
gnu/dist/grep/lib/posix/.cvsignore | 2 -
gnu/dist/grep/m4/Makefile.am | 28 -
gnu/dist/grep/m4/Makefile.in | 246 -
gnu/dist/grep/m4/codeset.m4 | 17 -
gnu/dist/grep/m4/decl.m4 | 37 -
gnu/dist/grep/m4/djgpp.m4 | 9 -
gnu/dist/grep/m4/dosfile.m4 | 21 -
gnu/dist/grep/m4/envsep.m4 | 20 -
gnu/dist/grep/m4/error.m4 | 11 -
gnu/dist/grep/m4/gettext.m4 | 370 -
gnu/dist/grep/m4/glibc.m4 | 33 -
gnu/dist/grep/m4/glibc21.m4 | 26 -
gnu/dist/grep/m4/header.m4 | 66 -
gnu/dist/grep/m4/iconv.m4 | 69 -
gnu/dist/grep/m4/init.m4 | 89 -
gnu/dist/grep/m4/install.m4 | 13 -
gnu/dist/grep/m4/inttypes_h.m4 | 22 -
gnu/dist/grep/m4/isc-posix.m4 | 17 -
gnu/dist/grep/m4/largefile.m4 | 129 -
gnu/dist/grep/m4/lcmessage.m4 | 24 -
gnu/dist/grep/m4/malloc.m4 | 34 -
gnu/dist/grep/m4/mbstate_t.m4 | 29 -
gnu/dist/grep/m4/missing.m4 | 30 -
gnu/dist/grep/m4/progtest.m4 | 51 -
gnu/dist/grep/m4/realloc.m4 | 34 -
gnu/dist/grep/m4/regex.m4 | 74 -
gnu/dist/grep/m4/sanity.m4 | 46 -
gnu/dist/grep/m4/strerror_r.m4 | 69 -
gnu/dist/grep/m4/uintmax_t.m4 | 22 -
gnu/dist/grep/m4/ulonglong.m4 | 17 -
gnu/dist/grep/m4/xstrtoumax.m4 | 34 -
gnu/dist/grep/po/.cvsignore | 4 -
gnu/dist/grep/src/.cvsignore | 2 -
gnu/dist/grep/vms/Makefile.am | 4 -
gnu/dist/grep/vms/Makefile.in | 221 -
gnu/dist/grep/vms/README | 16 -
gnu/dist/grep/vms/config_vms.h | 41 -
gnu/dist/grep/vms/make.com | 71 -
49 files changed, 0 insertions(+), 13156 deletions(-)
diffs (truncated from 13352 to 300 lines):
diff -r 993b6769ad59 -r 36569cd31e25 gnu/dist/grep/.cvsignore
--- a/gnu/dist/grep/.cvsignore Sun Jan 26 23:30:44 2003 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,13 +0,0 @@
-*.gmo
-Makefile
-Makefile.in
-aclocal.m4
-acinclude.m4
-configure
-config.cache
-config.h
-config.hin
-config.log
-config.status
-stamp-h.in
-stamp-h
diff -r 993b6769ad59 -r 36569cd31e25 gnu/dist/grep/autom4te-2.53.cache/output.0
--- a/gnu/dist/grep/autom4te-2.53.cache/output.0 Sun Jan 26 23:30:44 2003 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,10101 +0,0 @@
-.\" $NetBSD: output.0,v 1.1.1.1 2003/01/26 23:27:32 wiz Exp $
-.\"
-@%:@! /bin/sh
-@%:@ Guess values for system-dependent variables and create Makefiles.
-@%:@ Generated by GNU Autoconf 2.53.
-@%:@
-@%:@ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
-@%:@ Free Software Foundation, Inc.
-@%:@ This configure script is free software; the Free Software Foundation
-@%:@ gives unlimited permission to copy, distribute and modify it.
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-
-# NLS nuisances.
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
- { $as_unset LANG || test "${LANG+set}" != set; } ||
- { LANG=C; export LANG; }
-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
- { LC_ALL=C; export LC_ALL; }
-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
- { LC_TIME=C; export LC_TIME; }
-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
- { LC_CTYPE=C; export LC_CTYPE; }
-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
- { LANGUAGE=C; export LANGUAGE; }
-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
- { LC_COLLATE=C; export LC_COLLATE; }
-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
- { LC_NUMERIC=C; export LC_NUMERIC; }
-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
- { LC_MESSAGES=C; export LC_MESSAGES; }
-
-
-# Name of the executable.
-as_me=`(basename "$0") 2>/dev/null ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conftest.sh
- echo "exit 0" >>conftest.sh
- chmod +x conftest.sh
- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conftest.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="src/grep.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#if HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#if HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#if STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# if HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
Home |
Main Index |
Thread Index |
Old Index