Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/thorpej_scsipi]: src/sys/arch/i386/conf Ops, this was not supposed to be...
details: https://anonhg.NetBSD.org/src/rev/d425b1f8bbfb
branches: thorpej_scsipi
changeset: 477329:d425b1f8bbfb
user: bouyer <bouyer%NetBSD.org@localhost>
date: Mon Nov 20 20:55:16 2000 +0000
description:
Ops, this was not supposed to be commited.
diffstat:
sys/arch/i386/conf/ARMANDECHE | 654 ------------------------------------------
sys/arch/i386/conf/CHASSIRON | 561 ------------------------------------
sys/arch/i386/conf/ROCHEBONNE | 276 -----------------
3 files changed, 0 insertions(+), 1491 deletions(-)
diffs (truncated from 1503 to 300 lines):
diff -r d2c6a9ac8a3d -r d425b1f8bbfb sys/arch/i386/conf/ARMANDECHE
--- a/sys/arch/i386/conf/ARMANDECHE Mon Nov 20 19:59:34 2000 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,654 +0,0 @@
-# $NetBSD: ARMANDECHE,v 1.1.2.1 2000/11/20 20:09:14 bouyer Exp $
-#
-# GENERIC -- everything that's currently supported
-#
-
-include "arch/i386/conf/std.i386"
-
-maxusers 32 # estimated number of users
-
-# CPU support. At least one is REQUIRED.
-#options I386_CPU
-#options I486_CPU
-options I586_CPU
-#options I686_CPU
-
-# CPU-related options.
-#options MATH_EMULATE # floating point emulation
-#options VM86 # virtual 8086 emulation
-options USER_LDT # user-settable LDT; used by WINE
-# eliminate delay no-ops in I/O; recommended on all but very old machines
-options DUMMY_NOPS
-
-# delay between "rebooting ..." message and hardware reset, in milliseconds
-#options CPURESET_DELAY=2000
-
-# Misc. i386-specific options
-options XSERVER # X server support in console drivers
-#options XSERVER_DDB # PF12 gets you into DDB when X is running
-
-# This option allows you to force a serial console at the specified
-# I/O address. see console(4) for details.
-#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
-# you don't want the option below ON iff you are using the
-# serial console option of the new boot strap code.
-#options CONS_OVERRIDE # Always use above! independent of boot info
-
-# The following options override the memory sizes passed in from the boot
-# block. Use them *only* if the boot block is unable to determine the correct
-# values. Note that the BIOS may *correctly* report less than 640k of base
-# memory if the extended BIOS data area is located at the top of base memory
-# (as is the case on most recent systems).
-#options REALBASEMEM=639 # size of base memory (in KB)
-#options REALEXTMEM=15360 # size of extended memory (in KB)
-
-# Standard system options
-
-options UCONSOLE # users can use TIOCCONS (for xconsole)
-options INSECURE # disable kernel security levels
-
-options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
-options NTP # NTP phase/frequency locked loop
-
-options KTRACE # system call tracing via ktrace(1)
-
-options SYSVMSG # System V-like message queues
-options SYSVSEM # System V-like semaphores
-options SYSVSHM # System V-like memory sharing
-#options SHMMAXPGS=1024 # 1024 pages is the default
-
-#options LKM # loadable kernel modules
-
-# Diagnostic/debugging support options
-options DIAGNOSTIC # cheap kernel consistency checks
-#options DEBUG # expensive debugging checks/support
-#options KMEMSTATS # kernel memory statistics (vmstat -m)
-#options DDB # in-kernel debugger
-#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
-#options KGDB # remote debugger
-#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
-makeoptions DEBUG="-g" # compile full symbol table
-
-# Compatibility options
-options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
-options COMPAT_09 # NetBSD 0.9,
-options COMPAT_10 # NetBSD 1.0,
-options COMPAT_11 # NetBSD 1.1,
-options COMPAT_12 # NetBSD 1.2,
-options COMPAT_13 # NetBSD 1.3,
-options COMPAT_43 # and 4.3BSD
-options COMPAT_386BSD_MBRPART # recognize old partition ID
-
-#options COMPAT_SVR4 # binary compatibility with SVR4
-#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
-options COMPAT_LINUX # binary compatibility with Linux
-options COMPAT_FREEBSD # binary compatibility with FreeBSD
-options COMPAT_AOUT # binary compatibility with FreeBSD
-
-# File systems
-file-system FFS # UFS
-file-system EXT2FS # second extended file system (linux)
-#file-system LFS # log-structured file system
-file-system MFS # memory file system
-file-system NFS # Network File System client
-file-system NTFS # Windows/NT file system
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-file-system MSDOSFS # MS-DOS file system
-#file-system FDESC # /dev/fd
-#file-system KERNFS # /kern
-#file-system NULLFS # loopback file system
-#file-system PORTAL # portal filesystem (still experimental)
-#file-system PROCFS # /proc
-#file-system UMAPFS # NULLFS + uid and gid remapping
-#file-system UNION # union file system
-#file-system CODA # Coda File System; also needs vcoda (below)
-
-# File system options
-#options QUOTA # UFS quotas
-options SOFTDEP
-options FFS_EI # FFS Endian Independant support
-options NFSSERVER # Network File System server
-#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
- # immutable) behave as system flags.
-
-# Networking options
-#options GATEWAY # packet forwarding
-options INET # IP + ICMP + TCP + UDP
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-#options MROUTING # IP multicast routing
-#options NS # XNS
-#options NSIP # XNS tunneling over IP
-#options ISO,TPIP # OSI
-#options EON # OSI tunneling over IP
-#options CCITT,LLC,HDLC # X.25
-options NETATALK # AppleTalk networking protocols
-#options PPP_BSDCOMP # BSD-Compress compression support for PPP
-#options PPP_DEFLATE # Deflate compression support for PPP
-#options PPP_FILTER # Active filter support for PPP (requires bpf)
-#options PFIL_HOOKS # pfil(9) packet filter hooks
-options IPFILTER_LOG # ipmon(8) log support
-
-# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
-#options TCP_COMPAT_42
-
-# These options enable verbose messages for several subsystems.
-# Warning, these may compile large string tables into the kernel!
-#options EISAVERBOSE # verbose EISA device autoconfig messages
-options PCIVERBOSE # verbose PCI device autoconfig messages
-#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
-options SCSIVERBOSE # human readable SCSI error messages
-options USBVERBOSE # verbose USB device autoconfig messages
-
-options NFS_BOOT_BOOTP,NFS_BOOT_BOOTPARAM
-
-#
-# wscons options
-#
-# builtin terminal emulations
-#options WSEMUL_SUN # sun terminal emulation
-options WSEMUL_VT100 # VT100 / VT220 emulation
-# different kernel output - see dev/wscons/wsdisplayvar.h
-options WS_KERNEL_FG=WSCOL_GREEN
-#options WS_KERNEL_BG=WSCOL_BLACK
-# compatibility to other console drivers
-options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
-options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
-options WSDISPLAY_COMPAT_USL # VT handling
-options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
-#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
-# allocate a number of virtual screens at autoconfiguration time
-#options WSDISPLAY_DEFAULTSCREENS=4
-
-# Kernel root file system and dump configuration.
-config netbsd root on ? type ?
-#config netbsd root on sd0a type ffs
-#config netbsd root on ? type nfs
-
-#
-# Device configuration
-#
-
-mainbus0 at root
-
-apm0 at mainbus0 # Advanced power management
-
-
-# Basic Bus Support
-
-# PCI bus support
-pci* at mainbus? bus ?
-pci* at pchb? bus ?
-pci* at ppb? bus ?
-
-# PCI bridges
-pchb* at pci? dev ? function ? # PCI-Host bridges
-#pceb* at pci? dev ? function ? # PCI-EISA bridges
-pcib* at pci? dev ? function ? # PCI-ISA bridges
-ppb* at pci? dev ? function ? # PCI-PCI bridges
-# XXX 'puc's aren't really bridges, but there's no better place for them here
-#puc* at pci? dev ? function ? # PCI "universal" comm. cards
-
-# EISA bus support
-#eisa* at mainbus?
-#eisa* at pceb?
-
-# ISA bus support
-isa* at mainbus?
-#isa* at pceb?
-isa* at pcib?
-
-# PCMCIA bus support
-#pcmcia* at pcic? controller ? socket ?
-#pcmcia* at tcic? controller ? socket ?
-
-# ISA PCMCIA controllers
-#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x4000
-#pcic1 at isa? port 0x3e2 iomem 0xd4000 iosiz 0x4000
-#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x4000
-
-# PCI PCMCIA controllers
-#pcic0 at pci? dev? function ?
-
-# ISA Plug-and-Play bus support
-isapnp0 at isa?
-
-# ISA Plug-and-Play PCMCIA controllers
-#pcic* at isapnp?
-
-# Coprocessor Support
-
-# Math Coprocessor support
-npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
-
-
-# Console Devices
-
-# ISA console. You can only configure one of these!
-#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
-#vt0 at isa? port 0x60 irq 1 # PCVT console driver
-
-# Keyboard layout configuration for pccons
-#options FRENCH_KBD
-#options FINNISH_KBD
-#options GERMAN_KBD
-#options NORWEGIAN_KBD
-
-# wscons
-pckbc0 at isa? # pc keyboard controller
-pckbd* at pckbc? # PC keyboard
-# "opms" should not be enabled together with "pms" or "pmsi"
-#pms* at pckbc? # PS/2 mouse for wsmouse
-pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
-#opms* at pckbc? # backwards compatible PS/2 mouse
-vga0 at isa?
-vga* at pci?
-#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
-wsdisplay* at vga? console ?
-#wsdisplay* at pcdisplay? console ?
-wskbd* at pckbd? console ?
-#wsmouse* at pms?
-wsmouse* at pmsi?
-
-pcppi0 at isa?
-sysbeep0 at pcppi?
-
-# Serial Devices
-
-# PCI serial interfaces
-#com* at puc? port ? # 16x450s on "universal" comm boards
-#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
-
-# ISA Plug-and-Play serial interfaces
-#com* at isapnp? # Modems and serial boards
-
-# PCMCIA serial interfaces
-#com* at pcmcia? function ? # Modems and serial cards
-
-#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
-#com* at pcmcom? slave ? # ...and the slave devices
-
-# ISA serial interfaces
-#options COM_HAYESP # adds Hayes ESP serial board support
-com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
-com1 at isa? port 0x2f8 irq 3
-com2 at isa? port 0x3e8 irq 5
-#com3 at isa? port 0x2e8 irq 9
-#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
-#com* at ast? slave ?
-#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
-#com* at boca? slave ?
-#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
-#com* at tcom? slave ?
-#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
-#com* at rtfps? slave ?
-#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
-
-
-# Parallel Printer Interfaces
-
-# PCI parallel printer interfaces
-#lpt* at puc? port ? # || ports on "universal" comm boards
-
-# ISA parallel printer interfaces
Home |
Main Index |
Thread Index |
Old Index