Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/i386/conf Base on the GENERIC kernel - so it has th...
details: https://anonhg.NetBSD.org/src/rev/5558af5fa504
branches: trunk
changeset: 586882:5558af5fa504
user: dsl <dsl%NetBSD.org@localhost>
date: Wed Jan 04 20:43:18 2006 +0000
description:
Base on the GENERIC kernel - so it has the same set of supported devices.
diffstat:
sys/arch/i386/conf/GENERIC.MPACPI | 1254 +-----------------------------------
1 files changed, 54 insertions(+), 1200 deletions(-)
diffs (truncated from 1281 to 300 lines):
diff -r 579b21ed1e98 -r 5558af5fa504 sys/arch/i386/conf/GENERIC.MPACPI
--- a/sys/arch/i386/conf/GENERIC.MPACPI Wed Jan 04 19:14:55 2006 +0000
+++ b/sys/arch/i386/conf/GENERIC.MPACPI Wed Jan 04 20:43:18 2006 +0000
@@ -1,301 +1,26 @@
-# $NetBSD: GENERIC.MPACPI,v 1.55 2005/12/27 00:46:38 chs Exp $
-#
-# GENERIC.MPACPI -- Generic, plus ACPI Multiprocessor support
+# $NetBSD: GENERIC.MPACPI,v 1.56 2006/01/04 20:43:18 dsl Exp $
#
-# Use this kernel to utilize Hyper-Threading.
-
-include "arch/i386/conf/std.i386"
-
-options INCLUDE_CONFIG_FILE # embed config file in kernel binary
+# GENERIC.MP -- Generic, plus enable Multiprocessor support.
+#
-#ident "GENERIC-$Revision: 1.55 $"
-
-maxusers 32 # estimated number of users
-
-# CPU support. At least one is REQUIRED.
-#options I386_CPU
-#options I486_CPU
-#options I586_CPU
-options I686_CPU
+include "arch/i386/conf/GENERIC"
options MULTIPROCESSOR
-# CPU-related options.
-#options MATH_EMULATE # floating point emulation
-options VM86 # virtual 8086 emulation
-options USER_LDT # user-settable LDT; used by WINE
-# insert delay no-ops in interrupts; recommended on very old machines
-#options PIC_DELAY
-
-# Enhanced SpeedStep Technology in the Pentium M
-options ENHANCED_SPEEDSTEP
-#options EST_FREQ_USERWRITE # any user can set frequency
-
-options MTRR # memory-type range register syscall support
-# doesn't work with MP just yet..
-#options PERFCTRS # performance-monitoring counters support
-
-# delay between "rebooting ..." message and hardware reset, in milliseconds
-#options CPURESET_DELAY=2000
-
-# This option allows you to force a serial console at the specified
-# I/O address. see console(4) for details.
-#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
-# you don't want the option below ON iff you are using the
-# serial console option of the new boot strap code.
-#options CONS_OVERRIDE # Always use above! independent of boot info
-
-# The following options override the memory sizes passed in from the boot
-# block. Use them *only* if the boot block is unable to determine the correct
-# values. Note that the BIOS may *correctly* report less than 640k of base
-# memory if the extended BIOS data area is located at the top of base memory
-# (as is the case on most recent systems).
-#options REALBASEMEM=639 # size of base memory (in KB)
-#options REALEXTMEM=15360 # size of extended memory (in KB)
-
-# Standard system options
-
-options INSECURE # disable kernel security levels - X needs this
-
-options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
-options NTP # NTP phase/frequency locked loop
-#options NO_TSC_TIME # Don't use TSC microtime, even if available.
- # Improves time behavior under VMware.
-
-options KTRACE # system call tracing via ktrace(1)
-options SYSTRACE # system call vetting via systrace(1)
-
-options SYSVMSG # System V-like message queues
-options SYSVSEM # System V-like semaphores
-#options SEMMNI=10 # number of semaphore identifiers
-#options SEMMNS=60 # number of semaphores in system
-#options SEMUME=10 # max number of undo entries per process
-#options SEMMNU=30 # number of undo structures in system
-options SYSVSHM # System V-like memory sharing
-#options SHMMAXPGS=2048 # 2048 pages is the default
-options P1003_1B_SEMAPHORE # p1003.1b semaphore support
-
-options LKM # loadable kernel modules
-
-options USERCONF # userconf(4) support
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
-
-# Beep when it is safe to power down the system (requires sysbeep)
-#options BEEP_ONHALT
-# Some tunable details of the above feature (default values used below)
-#options BEEP_ONHALT_COUNT=3 # Times to beep
-#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
-#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
-
-# Enable experimental buffer queue strategy for better responsiveness under
-# high disk I/O load. Likely stable but not yet the default.
-#options BUFQ_READPRIO
-#options BUFQ_PRIOCSCAN
-
-# Diagnostic/debugging support options
-#options DIAGNOSTIC # expensive kernel consistency checks
-#options DEBUG # expensive debugging checks/support
-#options KMEMSTATS # kernel memory statistics (vmstat -m)
-options DDB # in-kernel debugger
-#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
-options DDB_HISTORY_SIZE=512 # enable history editing in DDB
-#options KGDB # remote debugger
-#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
-#makeoptions DEBUG="-g" # compile full symbol table
-
-# Compatibility options
-options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
-options COMPAT_09 # NetBSD 0.9
-options COMPAT_10 # NetBSD 1.0
-options COMPAT_11 # NetBSD 1.1
-options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
-options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
-options COMPAT_14 # NetBSD 1.4
-options COMPAT_15 # NetBSD 1.5
-options COMPAT_16 # NetBSD 1.6
-options COMPAT_20 # NetBSD 2.0
-options COMPAT_30 # NetBSD 3.0 compatibility.
-options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
-options COMPAT_386BSD_MBRPART # recognize old partition ID
-#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
-
-options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
-options COMPAT_SVR4 # binary compatibility with SVR4
-options COMPAT_IBCS2 # binary compatibility with SCO and ISC
-options COMPAT_LINUX # binary compatibility with Linux
-options COMPAT_FREEBSD # binary compatibility with FreeBSD
-#options COMPAT_MACH # binary compatibility with Mach binaries
-#options COMPAT_DARWIN # binary compatibility with Darwin binaries
-#options EXEC_MACHO # exec MACH-O binaries
-#options COMPAT_PECOFF # kernel support to run Win32 apps
-options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
-
-# File systems
-file-system FFS # UFS
-file-system EXT2FS # second extended file system (linux)
-file-system LFS # log-structured file system
-file-system MFS # memory file system
-file-system NFS # Network File System client
-file-system NTFS # Windows/NT file system (experimental)
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-file-system MSDOSFS # MS-DOS file system
-file-system FDESC # /dev/fd
-file-system KERNFS # /kern
-file-system NULLFS # loopback file system
-file-system OVERLAY # overlay file system
-file-system PORTAL # portal filesystem (still experimental)
-file-system PROCFS # /proc
-file-system UMAPFS # NULLFS + uid and gid remapping
-file-system UNION # union file system
-file-system CODA # Coda File System; also needs vcoda (below)
-file-system SMBFS # experimental - CIFS; also needs nsmb (below)
-file-system PTYFS # /dev/pts/N support
-#file-system TMPFS # experimental - Efficient memory file-system
-
-# File system options
-options QUOTA # UFS quotas
-#options FFS_EI # FFS Endian Independent support
-options SOFTDEP # FFS soft updates support.
-options NFSSERVER # Network File System server
-#options FFS_NO_SNAPSHOT # No FFS snapshot support
-#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
- # immutable) behave as system flags.
-
-# Networking options
-#options GATEWAY # packet forwarding
-options INET # IP + ICMP + TCP + UDP
-options INET6 # IPV6
-#options IPSEC # IP security
-#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
-#options IPSEC_DEBUG # debug for IP security
-#options MROUTING # IP multicast routing
-#options PIM # Protocol Independent Multicast
-options NS # XNS
-#options NSIP # XNS tunneling over IP
-options ISO,TPIP # OSI
-#options EON # OSI tunneling over IP
-options CCITT,LLC,HDLC # X.25
-options NETATALK # AppleTalk networking protocols
-options PPP_BSDCOMP # BSD-Compress compression support for PPP
-options PPP_DEFLATE # Deflate compression support for PPP
-options PPP_FILTER # Active filter support for PPP (requires bpf)
-options PFIL_HOOKS # pfil(9) packet filter hooks
-options IPFILTER_LOG # ipmon(8) log support
-#options IPFILTER_DEFAULT_BLOCK # block all packets by default
-#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
-
-#options ALTQ # Manipulate network interfaces' output queues
-#options ALTQ_BLUE # Stochastic Fair Blue
-#options ALTQ_CBQ # Class-Based Queueing
-#options ALTQ_CDNR # Diffserv Traffic Conditioner
-#options ALTQ_FIFOQ # First-In First-Out Queue
-#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
-#options ALTQ_HFSC # Hierarchical Fair Service Curve
-#options ALTQ_LOCALQ # Local queueing discipline
-#options ALTQ_PRIQ # Priority Queueing
-#options ALTQ_RED # Random Early Detection
-#options ALTQ_RIO # RED with IN/OUT
-#options ALTQ_WFQ # Weighted Fair Queueing
-
-# These options enable verbose messages for several subsystems.
-# Warning, these may compile large string tables into the kernel!
-options ACPIVERBOSE # verbose ACPI device autoconfig messages
-#options EISAVERBOSE # verbose EISA device autoconfig messages
-options MIIVERBOSE # verbose PHY autoconfig messages
-options PCIVERBOSE # verbose PCI device autoconfig messages
-#options PCI_CONFIG_DUMP # verbosely dump PCI config space
-#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
-options SCSIVERBOSE # human readable SCSI error messages
-options USBVERBOSE # verbose USB device autoconfig messages
-#options PNPBIOSVERBOSE # verbose PnP BIOS messages
-#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
-options I2OVERBOSE # verbose I2O driver messages
-#options MCAVERBOSE # verbose MCA device autoconfig messages
-
-options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
-
-#
-# wscons options
-#
-# builtin terminal emulations
-#options WSEMUL_SUN # sun terminal emulation
-options WSEMUL_VT100 # VT100 / VT220 emulation
-# different kernel output - see dev/wscons/wsdisplayvar.h
-options WS_KERNEL_FG=WSCOL_GREEN
-#options WS_KERNEL_BG=WSCOL_BLACK
-# compatibility to other console drivers
-options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
-options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
-options WSDISPLAY_COMPAT_USL # VT handling
-options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
-#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for pckbd driver
-#options UKBD_LAYOUT="(KB_DE | KB_NODEAD)" # for ukbd driver
-# allocate a number of virtual screens at autoconfiguration time
-#options WSDISPLAY_DEFAULTSCREENS=4
-# use a large software cursor that doesn't blink
-options PCDISPLAY_SOFTCURSOR
-# modify the screen type of the console; defaults to "80x25"
-#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
-# work around a hardware bug that loaded fonts don't work; found on ATI cards
-#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
-# the following enables some functions to get mouse console support.
-# if you want a really secure system, it may be better not to enable them,
-# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
-#options WSDISPLAY_CHARFUNCS # mouse console support
-# console scrolling support.
-options WSDISPLAY_SCROLLSUPPORT
-# enable VGA raster mode capable of displaying multilingual text on console
-#options VGA_RASTERCONSOLE
-
-# Kernel root file system and dump configuration.
-config netbsd root on ? type ?
-#config netbsd root on sd0a type ffs
-#config netbsd root on ? type nfs
-
-#
-# Device configuration
-#
-
-mainbus0 at root
-
-cpu* at mainbus?
-ioapic* at mainbus?
-
-# Doesn't do anything yet.
-#p64h2apic* at pci? dev? function? # P64H2 IOxAPIC
-
-#apm0 at mainbus0 # Advanced power management
-
-# Tuning for power management, see apm(4) for more details.
-#options APM_NO_IDLE # Don't call BIOS CPU idle function
-#options APM_V10_ONLY # Use only the APM 1.0 calls
-#options APM_NO_POWEROFF # Don't power off on halt(8)
-#options APM_POWER_PRINT # Print stats on the console
-#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
-
-
-# Basic Bus Support
-
-# Advanced Configuration and Power Interface
-
-# This option can be used to retrieve CPU and APIC information.
-# that I/O APICs can be used if ACPI is enabled below.
-# To use the I/O APIC(s), enable the ioapic line above.
-#options MPBIOS # configure CPUs and APICs using MPBIOS
-#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
+options APM_NO_IDLE
+#options DIAGNOSTIC # STRONGLY RECOMMENDED
+#options LOCKDEBUG
+#options MPDEBUG
Home |
Main Index |
Thread Index |
Old Index