Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/i386/conf Sample kernel configuration for a Soekris...
details: https://anonhg.NetBSD.org/src/rev/0a930a6f4677
branches: trunk
changeset: 522483:0a930a6f4677
user: thorpej <thorpej%NetBSD.org@localhost>
date: Wed Feb 20 03:15:35 2002 +0000
description:
Sample kernel configuration for a Soekris Engineering net4501
single board computer.
diffstat:
sys/arch/i386/conf/net4501 | 254 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 254 insertions(+), 0 deletions(-)
diffs (258 lines):
diff -r eec8af5df4bd -r 0a930a6f4677 sys/arch/i386/conf/net4501
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/i386/conf/net4501 Wed Feb 20 03:15:35 2002 +0000
@@ -0,0 +1,254 @@
+# $NetBSD: net4501,v 1.1 2002/02/20 03:15:35 thorpej Exp $
+#
+# net4501 -- kernel configuration for a Soekris Engineering net4501
+# single-board computer.
+#
+# http://www.soekris.com/
+#
+
+include "arch/i386/conf/std.i386"
+
+#ident "net4501-$Revision: 1.1 $"
+
+maxusers 32 # estimated number of users
+
+# CPU support. At least one is REQUIRED.
+#options I386_CPU
+options I486_CPU
+#options I586_CPU
+#options I686_CPU
+
+# CPU-related options.
+#options MATH_EMULATE # floating point emulation
+#options VM86 # virtual 8086 emulation
+#options USER_LDT # user-settable LDT; used by WINE
+# eliminate delay no-ops in I/O; recommended on all but very old machines
+options DUMMY_NOPS
+
+#options MTRR # memory-type range register syscall support
+
+# delay between "rebooting ..." message and hardware reset, in milliseconds
+#options CPURESET_DELAY=2000
+
+# This option allows you to force a serial console at the specified
+# I/O address. see console(4) for details.
+#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
+# you don't want the option below ON iff you are using the
+# serial console option of the new boot strap code.
+#options CONS_OVERRIDE # Always use above! independent of boot info
+
+# The following options override the memory sizes passed in from the boot
+# block. Use them *only* if the boot block is unable to determine the correct
+# values. Note that the BIOS may *correctly* report less than 640k of base
+# memory if the extended BIOS data area is located at the top of base memory
+# (as is the case on most recent systems).
+#options REALBASEMEM=639 # size of base memory (in KB)
+#options REALEXTMEM=15360 # size of extended memory (in KB)
+
+# Standard system options
+
+options UCONSOLE # users can use TIOCCONS (for xconsole)
+options INSECURE # disable kernel security levels
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+options NTP # NTP phase/frequency locked loop
+
+options KTRACE # system call tracing via ktrace(1)
+
+options SYSVMSG # System V-like message queues
+options SYSVSEM # System V-like semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
+options SYSVSHM # System V-like memory sharing
+#options SHMMAXPGS=1024 # 1024 pages is the default
+
+options LKM # loadable kernel modules
+
+#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
+
+# Diagnostic/debugging support options
+#options DIAGNOSTIC # expensive kernel consistency checks
+#options DEBUG # expensive debugging checks/support
+#options KMEMSTATS # kernel memory statistics (vmstat -m)
+options DDB # in-kernel debugger
+options DDB_HISTORY_SIZE=512 # enable history editing in DDB
+#options KGDB # remote debugger
+#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
+#makeoptions DEBUG="-g" # compile full symbol table
+
+# Compatibility options
+options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
+options COMPAT_09 # NetBSD 0.9,
+options COMPAT_10 # NetBSD 1.0,
+options COMPAT_11 # NetBSD 1.1,
+options COMPAT_12 # NetBSD 1.2,
+options COMPAT_13 # NetBSD 1.3,
+options COMPAT_14 # NetBSD 1.4,
+options COMPAT_15 # NetBSD 1.5,
+options COMPAT_43 # and 4.3BSD
+options COMPAT_386BSD_MBRPART # recognize old partition ID
+#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
+
+#options COMPAT_SVR4 # binary compatibility with SVR4
+#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
+#options COMPAT_LINUX # binary compatibility with Linux
+#options COMPAT_FREEBSD # binary compatibility with FreeBSD
+#options COMPAT_MACH # binary compatibility with Mach binaries
+#options EXEC_MACHO # exec MACH-O binaries
+#options COMPAT_PECOFF # kernel support to run Win32 apps
+
+# File systems
+file-system FFS # UFS
+#file-system EXT2FS # second extended file system (linux)
+#file-system LFS # log-structured file system
+file-system MFS # memory file system
+file-system NFS # Network File System client
+#file-system NTFS # Windows/NT file system (experimental)
+#file-system CD9660 # ISO 9660 + Rock Ridge file system
+#file-system MSDOSFS # MS-DOS file system
+file-system FDESC # /dev/fd
+file-system KERNFS # /kern
+#file-system NULLFS # loopback file system
+#file-system OVERLAY # overlay file system
+#file-system PORTAL # portal filesystem (still experimental)
+file-system PROCFS # /proc
+#file-system UMAPFS # NULLFS + uid and gid remapping
+#file-system UNION # union file system
+#file-system CODA # Coda File System; also needs vcoda (below)
+
+# File system options
+#options QUOTA # UFS quotas
+#options FFS_EI # FFS Endian Independent support
+options SOFTDEP # FFS soft updates support.
+#options NFSSERVER # Network File System server
+#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
+ # immutable) behave as system flags.
+
+# Networking options
+#options GATEWAY # packet forwarding
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+#options IPSEC # IP security
+#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
+#options IPSEC_DEBUG # debug for IP security
+options MROUTING # IP multicast routing
+#options NS # XNS
+#options NSIP # XNS tunneling over IP
+#options ISO,TPIP # OSI
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25
+#options NETATALK # AppleTalk networking protocols
+#options PPP_BSDCOMP # BSD-Compress compression support for PPP
+#options PPP_DEFLATE # Deflate compression support for PPP
+#options PPP_FILTER # Active filter support for PPP (requires bpf)
+options PFIL_HOOKS # pfil(9) packet filter hooks
+#options IPFILTER_LOG # ipmon(8) log support
+#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
+
+# These options enable verbose messages for several subsystems.
+# Warning, these may compile large string tables into the kernel!
+#options MIIVERBOSE # verbose PHY autoconfig messages
+#options PCIVERBOSE # verbose PCI device autoconfig messages
+#options PCI_CONFIG_DUMP # verbosely dump PCI config space
+
+options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
+
+# Kernel root file system and dump configuration.
+config netbsd root on ? type ?
+#config netbsd root on sd0a type ffs
+#config netbsd root on ? type nfs
+
+#
+# Device configuration
+#
+
+mainbus0 at root
+
+# Basic Bus Support
+
+# PCI bus support
+pci* at mainbus? bus ?
+pci* at pchb? bus ?
+
+# Configure PCI using BIOS information
+#options PCIBIOS # PCI BIOS support
+#options PCIBIOSVERBOSE # PCI BIOS verbose info
+#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
+#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
+#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
+#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
+#options PCIBIOS_INTR_GUESS # see pcibios(4)
+#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
+
+# PCI bridges
+pchb* at pci? dev ? function ? # PCI-Host bridges
+
+# ISA bus support
+isa0 at mainbus?
+
+# Coprocessor Support
+
+# Math Coprocessor support
+npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
+
+# ISA serial interfaces
+com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
+com1 at isa? port 0x2f8 irq 3
+
+# IDE and related devices
+
+# ISA ST506, ESDI, and IDE controllers
+# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
+# fall back to 16bits I/O if 32bits I/O are not functional).
+# Some controllers pass the initial 32bit test, but will fail later.
+wdc0 at isa? port 0x1f0 irq 14 flags 0x00
+
+# IDE drives
+# Flags are used only with controllers that support DMA operations
+# and mode settings (e.g. some pciide controllers)
+# The lowest order four bits (rightmost digit) of the flags define the PIO
+# mode to use, the next set of four bits the DMA mode and the third set the
+# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
+# to use, and the last bit must be 1 for this setting to be used.
+# For DMA and UDMA, 0xf (1111) means 'disable'.
+# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
+# (0xc=1100, 0xa=1010, 0xf=1111)
+# 0x0000 means "use whatever the drive claims to support".
+wd* at wdc? channel ? drive ? flags 0x0000
+
+# Network Interfaces
+
+# PCI network interfaces
+sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
+
+# MII/PHY support
+nsphyter* at mii? phy ? # NS83843 PHYs
+
+# Pseudo-Devices
+
+# network pseudo-devices
+pseudo-device bpfilter 16 # Berkeley packet filter
+pseudo-device ipfilter # IP filter (firewall) and NAT
+pseudo-device loop # network loopback
+#pseudo-device ppp 2 # Point-to-Point Protocol
+#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
+#pseudo-device sl 2 # Serial Line IP
+#pseudo-device strip 2 # Starmode Radio IP (Metricom)
+pseudo-device tun 2 # network tunneling over tty
+#pseudo-device gre 2 # generic L3 over IP tunnel
+#pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
+pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
+pseudo-device faith 1 # IPv[46] tcp relay translation i/f
+pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
+pseudo-device vlan # IEEE 802.1q encapsulation
+pseudo-device bridge # simple inter-network bridging
+
+# miscellaneous pseudo-devices
+pseudo-device pty # pseudo-terminals
+#pseudo-device tb 1 # tablet line discipline
+#pseudo-device sequencer 1 # MIDI sequencer
+# rnd works; RND_COM does not on port i386 yet.
+pseudo-device rnd # /dev/random and in-kernel generator
+#options RND_COM # use "com" randomness as well (BROKEN)
Home |
Main Index |
Thread Index |
Old Index