Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/cats/include Remove a whole load of non-CATS stuff.
details: https://anonhg.NetBSD.org/src/rev/c405b687cf31
branches: trunk
changeset: 522531:c405b687cf31
user: skrll <skrll%NetBSD.org@localhost>
date: Wed Feb 20 22:32:10 2002 +0000
description:
Remove a whole load of non-CATS stuff.
diffstat:
sys/arch/cats/include/irqhandler.h | 179 +------------------------------------
1 files changed, 1 insertions(+), 178 deletions(-)
diffs (193 lines):
diff -r a62a13c3fa28 -r c405b687cf31 sys/arch/cats/include/irqhandler.h
--- a/sys/arch/cats/include/irqhandler.h Wed Feb 20 22:28:54 2002 +0000
+++ b/sys/arch/cats/include/irqhandler.h Wed Feb 20 22:32:10 2002 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: irqhandler.h,v 1.2 2001/12/20 01:20:27 thorpej Exp $ */
+/* $NetBSD: irqhandler.h,v 1.3 2002/02/20 22:32:10 skrll Exp $ */
/*
* Copyright (c) 1994-1996 Mark Brinicombe.
@@ -53,183 +53,6 @@
/* Define the IRQ bits */
-/*
- * XXX this is really getting rather horrible.
- * Shortly to be replaced with system specific interrupt tables and handling
- */
-
-#if defined(RISCPC) || defined(CPU_ARM7500)
-
-#ifdef CPU_ARM7500
-
-/*#define IRQ_PRINTER 0x00*/
-#define IRQ_RESERVED0 0x01
-#define IRQ_BUTTON 0x02
-#define IRQ_FLYBACK 0x03
-#define IRQ_POR 0x04
-#define IRQ_TIMER0 0x05
-#define IRQ_TIMER1 0x06
-
-#define IRQ_DREQ3 0x08
-/*#define IRQ_HD1 0x09*/
-/*#define IRQ_HD IRQ_HD1*/
-#define IRQ_DREQ2 0x0A
-/*#define IRQ_FLOPPY 0x0C*/
-/*#define IRQ_SERIAL 0x0D*/
-#define IRQ_KBDTX 0x0E
-#define IRQ_KBDRX 0x0F
-
-#define IRQ_IRQ3 0x10
-#define IRQ_IRQ4 0x11
-#define IRQ_IRQ5 0x12
-#define IRQ_IRQ6 0x13
-#define IRQ_IRQ7 0x14
-#define IRQ_IRQ9 0x15
-#define IRQ_IRQ10 0x16
-#define IRQ_IRQ11 0x17
-
-#define IRQ_MSDRX 0x18
-#define IRQ_MSDTX 0x19
-#define IRQ_ATOD 0x1A
-#define IRQ_CLOCK 0x1B
-#define IRQ_PANIC 0x1C
-#define IRQ_RESERVED2 0x1D
-#define IRQ_RESERVED3 0x1E
-
-/*
- * Note that Sound DMA IRQ is on the 31st vector.
- * It's not part of the IRQD.
- */
-#define IRQ_SDMA 0x1F
-
-/* Several interrupts are different between the A7000 and RC7500 */
-#ifdef RC7500
-
-#define IRQ_FIQDOWN 0x07
-#define IRQ_ETHERNET 0x0B
-#define IRQ_HD2 IRQ_IRQ11
-
-#else /* RC7500 */
-
-#define IRQ_RESERVED1 0x07
-#define IRQ_EXTENDED 0x0B
-#define IRQ_PODULE 0x0D
-
-#define IRQ_EXPCARD0 0x20
-#define IRQ_EXPCARD1 0x21
-#define IRQ_EXPCARD2 0x22
-#define IRQ_EXPCARD3 0x23
-#define IRQ_EXPCARD4 0x24
-#define IRQ_EXPCARD5 0x25
-#define IRQ_EXPCARD6 0x26
-#define IRQ_EXPCARD7 0x27
-
-#endif /* RC7500 */
-
-#else /* CPU_ARM7500 */
-
-#ifdef RISCPC
-/*#define IRQ_PRINTER 0x00*/
-#define IRQ_RESERVED0 0x01
-/*#define IRQ_FLOPPYIDX 0x02*/
-#define IRQ_FLYBACK 0x03
-#define IRQ_POR 0x04
-#define IRQ_TIMER0 0x05
-#define IRQ_TIMER1 0x06
-#define IRQ_RESERVED1 0x07
-
-#define IRQ_RESERVED2 0x08
-/*#define IRQ_HD 0x09*/
-/*#define IRQ_SERIAL 0x0A*/
-#define IRQ_EXTENDED 0x0B
-/*#define IRQ_FLOPPY 0x0C*/
-#define IRQ_PODULE 0x0D
-#define IRQ_KBDTX 0x0E
-#define IRQ_KBDRX 0x0F
-
-#define IRQ_DMACH0 0x10
-#define IRQ_DMACH1 0x11
-#define IRQ_DMACH2 0x12
-#define IRQ_DMACH3 0x13
-#define IRQ_DMASCH0 0x14
-#define IRQ_DMASCH1 0x15
-#define IRQ_RESERVED3 0x16
-#define IRQ_RESERVED4 0x17
-
-#define IRQ_EXPCARD0 0x18
-#define IRQ_EXPCARD1 0x19
-#define IRQ_EXPCARD2 0x1A
-#define IRQ_EXPCARD3 0x1B
-#define IRQ_EXPCARD4 0x1C
-#define IRQ_EXPCARD5 0x1D
-#define IRQ_EXPCARD6 0x1E
-#define IRQ_EXPCARD7 0x1F
-#endif /* RISCPC */
-
-#endif /* CPU_ARM7500 */
-
-#endif /* RISPC || CPU_ARM7500 */
-
-#ifdef OFWGENCFG
-/* These are just made up for now! -JJK */
-#define IRQ_TIMER0 0
-#endif
-
-/* XXX why is this in ARM7500? */
-#ifdef SHARK
-/*
- * shark hardware requirements for IRQ's:
- * IDE: 14 (hardwired)
- * PCI: 5, 9, 10, 11, 15(mapped to UMIPCI inta, intb, intc, intd)
- * UMIISA: 10, 11, 12
- * SuperIO: 1, 3..12, 14, 15(all may be remapped. defaults as follows.)
- * KBC: 1
- * USI: 3 (UART with Slow Infrared support)
- * UART: 4
- * FLOPPY: 6 (not currently used on shark)
- * PARALLEL: 7
- * RTC: 8 (not used on shark: RTC in sequoia used)
- * MOUSE: 12
- * Sequoia: 8 (internal RTC hardwired to irq 8)
- * Codec: 5, 7, 9, 10, 15 (irqe, connected to 15, has special status.)
- * CS8900: 5, 10, 11, 12 (P.14 of datasheet sez only 1 used/time)
- * FERR#: 13 (unconnected floating point error)
- *
- * total of 15 irqs:
- * timer, ide, 2 umi = isa/pci, ethernet, 2 codec, kb, usi, uart, floppy,
- * parallel, rtc, mouse, ferr (irq 13)
- *
- * eventually, need to read the OFW dev info tree, and allocate IRQs.
- * hardcoded for now.
- */
-#define IRQ_TIMER0 0x00 /* hardwired to 8254 counter 0 in sequoia */
-#define IRQ_KEYBOARD 0x01
-#define IRQ_CASCADE 0x02 /* hardwired IRQ for second 8259 = IRQ_SLAVE */
-#define IRQ_USI 0x03
-#define IRQ_UART 0x04
-#define IRQ_ETHERNET 0x05
-#define IRQ_FLOPPY 0x06
-#define IRQ_PARALLEL 0x07
-
-#define IRQ_RTC 0x08 /* hardwired to the sequoia RTC */
-#define IRQ_CODEC1 0x09
-#define IRQ_UMI1 0x0A /* isa or pci */
-#define IRQ_UMI2 0x0B /* isa or pci */
-
-#define IRQ_MOUSE 0x0C
-#define IRQ_FERR 0x0D /* FERR# pin on sequoia needs to be connected */
-#define IRQ_IDE 0x0E /* hardwired to the IDE connector */
-#define IRQ_CODEC2 0x0F /* special interrupt on codec */
-
-/* XXX should this go into isa_machdep.h. Somewhere else? */
-/* Interrupt sharing types. */
-#define IST_NONE 0 /* none */
-#define IST_PULSE 1 /* pulsed */
-#define IST_EDGE 2 /* edge-triggered */
-#define IST_LEVEL 3 /* level-triggered */
-
-#endif /* SHARK */
-
#define IRQ_VSYNC IRQ_FLYBACK /* Aliased */
#define IRQ_NETSLOT IRQ_EXTENDED
Home |
Main Index |
Thread Index |
Old Index