Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/sparc64/conf do the 32 bit / 64 bit name swap, as p...
details: https://anonhg.NetBSD.org/src/rev/779940f9d2c2
branches: trunk
changeset: 495407:779940f9d2c2
user: mrg <mrg%NetBSD.org@localhost>
date: Thu Jul 27 14:38:45 2000 +0000
description:
do the 32 bit / 64 bit name swap, as per GENERIC.
diffstat:
sys/arch/sparc64/conf/EVERGLADES | 451 +----------------------------------
sys/arch/sparc64/conf/EVERGLADES32 | 448 ++++++++++++++++++++++++++++++++++
sys/arch/sparc64/conf/POWEROFSEVEN | 457 +----------------------------------
sys/arch/sparc64/conf/POWEROFSEVEN32 | 454 ++++++++++++++++++++++++++++++++++
sys/arch/sparc64/conf/POWEROFSEVEN64 | 7 -
5 files changed, 912 insertions(+), 905 deletions(-)
diffs (truncated from 1841 to 300 lines):
diff -r 8aced8936d50 -r 779940f9d2c2 sys/arch/sparc64/conf/EVERGLADES
--- a/sys/arch/sparc64/conf/EVERGLADES Thu Jul 27 14:34:06 2000 +0000
+++ b/sys/arch/sparc64/conf/EVERGLADES Thu Jul 27 14:38:45 2000 +0000
@@ -1,448 +1,7 @@
-# $NetBSD: EVERGLADES,v 1.5 2000/07/27 14:34:09 mrg Exp $
-#
-# from: NetBSD: GENERIC,v 1.33 2000/05/19 05:28:47 eeh Exp
-
-include "arch/sparc64/conf/std.sparc64"
-
-#ident "GENERIC-$Revision: 1.5 $"
-
-maxusers 32
-
-## System kernel configuration. See options(4) for more detail.
-
-
-# Options for variants of the Sun SPARC architecure.
-# We currently support three architecture types; at least one is required.
-options SUN4U # sun4u - Ultra 140 and 170
-#options LOCKDEBUG
-options __ELF__ # we use elf
-#options _LP64 # we're using a 64-bit compiler
-
-## System options specific to the sparc machine type
-
-## Use a faster console than the PROM's slow drawing routines. Not needed
-## for headless (no framebuffer) machines.
-# XXX broken on sparc64
-#options RASTERCONSOLE # fast rasterop console
-#options FONT_GALLANT12x22 # the console font
-#options FONT_BOLD8x16 # a somewhat smaller font
-
-#### System options that are the same for all ports
-
-## Root device configuration: change the ?'s if you are going to use a
-## nonstandard root partition (other than where the kernel is booted from)
-## and/or nonstandard root type (not ffs or nfs). Normally this can be
-## automagically determined at boot time.
-
-config netbsd root on ? type ?
-options BUFCACHE=20
-
-## UVM options.
-#options UVM_PAGE_TRKOWN
-#options UVMHIST
-#options UVMHIST_PRINT # Loud!
-
-## System call tracing (see ktrace(1)).
-options KTRACE
-
-## Collect statistics on kernel malloc's and free's. This does have a
-## significant performance hit on slower machines, so it is intended for
-## diagnostic use only.
-#options KMEMSTATS
-
-## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
-options SYSVMSG # System V message queues
-options SYSVSEM # System V semaphores
-options SYSVSHM # System V shared memory
-#options SHMMAXPGS=1024 # 1024 pages is the default
-
-## Loadable kernel module support; still under development.
-options LKM
-
-## NFS boot options; default on sparc is the bootparam protocol
-options NFS_BOOT_BOOTPARAM
-#options NFS_BOOT_BOOTP
-#options NFS_BOOT_DHCP
-
-#### Debugging options
-
-## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
-## serial console break or keyboard reset, where the PROM would normally
-## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
-# we enable DDB in GENERIC for now.
-options DDB # kernel dynamic debugger
-options DDB_HISTORY_SIZE=100 # enable history editing in DDB
-#options DDB_ONPANIC # see also sysctl(8): `ddb.onpanic'
-
-## You may also use gdb, on another computer connected to this machine over
-## a serial port. Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
-## a dev_t encoded device number of the serial port to use.
-## (0xc01 = ttya, 0xc02 = ttyb.)
-#options KGDB # support for kernel gdb
-#options KGDBDEV=0xc01 # kgdb device number (this sample is `ttyb')
-#options KGDBRATE=38400 # baud rate
-
-
-## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
-## such that gdb(1) can be used on a kernel coredump.
-
-#makeoptions DEBUG="-g"
-
-
-## Adds code to the kernel that does internal consistency checks, and will
-## cause the kernel to panic if corruption of internal data structures
-## is detected.
-options DIAGNOSTIC # extra kernel sanity checking
-
-## Enable (possibly expensive) debugging code that may also display messages
-## on the system console
-options DEBUG
-options LEDEBUG
-
-## Make SCSI error messages more verbose when explaining their meanings.
-options SCSIVERBOSE
-#options PCIVERBOSE
-#options MIIVERBOSE # verbose PHY autoconfig messages
-#options PCI_CONFIG_DUMP # verbosely dump PCI config space
+# $NetBSD: EVERGLADES,v 1.6 2000/07/27 14:38:45 mrg Exp $
-## `INSECURE' turns off the kernel security level (securelevel = 0 always).
-## This allows writing to /dev/mem, loading kernel modules while multi-user,
-## and other insecurities good only for development work. Do not use this
-## option on a production machine.
-options INSECURE
-
-## Allow non-root users to grab /dev/console with programs such as xconsole.
-## `xconsole' therefore does not need setuid root with this option enabled.
-options UCONSOLE
-
-## `FDSCRIPTS' allows non-readable but executable scripts by providing a
-## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
-## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
-## opaque file mechanism. Perl calls this "secure setuid scripts."
-
-#options FDSCRIPTS
-#options SETUIDSCRIPTS
-
-## Options for compatibility with previous releases foreign system binaries.
-## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
-## additional user-level utilities or system configuration files. See
-## compat_sunos(8) and compat_svr4(8).
-
-options COMPAT_43 # 4.3BSD system interfaces
-options COMPAT_10 # NetBSD 1.0 binary compatibility
-#options COMPAT_11 # NetBSD 1.1 binary compatibility
-#options COMPAT_12 # NetBSD 1.2 binary compatibility
-options COMPAT_13 # NetBSD 1.3 binary compatibility
-options COMPAT_14 # NetBSD 1.4 binary compatibility
-options COMPAT_SUNOS # SunOS 4.x binary compatibility
-options COMPAT_SVR4 # SunOS 5.x binary compatibility
-#options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility -- 64-bit only
-options EXEC_AOUT # execve(2) support for a.out binaries
-options EXEC_ELF32 # Exec module for SunOS 5.x binaries.
-#options EXEC_ELF64 # Exec module for sparc64 & SunOs 5.x binaries. -- 64-bit only
-#options SYSCALL_DEBUG
-
-## File systems. You probably need at least one of FFS or NFS.
-file-system FFS # Berkeley Fast Filesystem
-file-system NFS # Sun NFS-compatible filesystem client
-file-system KERNFS # kernel data-structure filesystem
-#file-system NULLFS # NULL layered filesystem
-#file-system OVERLAY # overlay file system
-file-system MFS # memory-based filesystem
-#file-system FDESC # user file descriptor filesystem
-#file-system UMAPFS # uid/gid remapping filesystem
-#file-system LFS # Log-based filesystem (still experimental)
-#file-system PORTAL # portal filesystem (still experimental)
-#file-system PROCFS # /proc
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-#file-system UNION # union file system
-file-system MSDOSFS # MS-DOS FAT filesystem(s).
-
-## File system options.
-options NFSSERVER # Sun NFS-compatible filesystem server
-options QUOTA # FFS quotas
-options FFS_EI # FFS Endian Independent support
-#options SOFTDEP # FFS soft updates support.
-
-## Network protocol support. In most environments, INET is required.
-options INET # IP (Internet Protocol) v4
-options INET6 # IPV6
-options IPSEC # IP security
-options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-#options TCP_COMPAT_42 # 4.2BSD IP implementation compatibility
-#options GATEWAY # packet forwarding ("router switch")
-#options MROUTING # packet forwarding of multicast packets
-#options DIRECTED_BROADCAST # allow broadcasts through routers
-#options NS # Xerox NS networking
-#options NSIP # Xerox NS tunneling over IP
-#options ISO,TPIP # OSI networking
-#options EON # OSI tunneling over IP
-#options CCITT,LLC,HDLC # X.25 packet switched protocol
-#options NETATALK # AppleTalk (over Ethernet) protocol
-options NTP # Network Time Protocol in-kernel support
-#options PPS_SYNC # Add serial line synchronization for NTP
-options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
-options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
-options PPP_BSDCOMP # Add BSD compression to ppp device
-options PPP_DEFLATE # Add deflate (libz) compression to ppp device
-options PPP_FILTER # Add active filters for ppp (via bpf)
-
-
-#### Main bus and CPU .. all systems.
-mainbus0 at root
-cpu0 at mainbus0
-
-#### Bus types found on SPARC systems.
-
-sbus0 at mainbus0 # Ultra 1
-#upa0 at mainbus0 # Ultra 1E, Ultra 2, Ex0000
-#psycho* at mainbus0 # Darwin, Ultra5
-#pci* at psycho?
-#pci* at simba?
-#simba* at pci? dev ? function ? # `APB' support.
-#ebus* at pci? # ebus devices
-
-#### Standard system devices -- all required for a given architecture
-
-## PROM console driver -- if all else fails
-pcons0 at mainbus0 # PROM console
-
-## Auxiliary system registers -- We use the OBP for power management
-#auxio* at ebus? # auxio registers
-auxio* at sbus? slot ? offset ? # auxio registers
-
-# We also need:
-bpp* at sbus? slot ? offset ? # parallel port
-#lpt* at ebus? # parallel port
-
-## Mostek clock found on 4/300, sun4c, sun4m and sun4u systems.
-## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
-clock* at sbus? slot ? offset ?
-#clock* at ebus?
+include "arch/sparc64/conf/EVERGLADES"
-## Timer chip found on 4/300, sun4c, sun4m and (some) sun4u systems.
-timer* at mainbus0 # sun4c
-
-#### Serial port configuration
-
-## Zilog 8530 serial chips. Each has two-channels.
-## zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
-zs0 at sbus? slot ? offset ?
-zstty0 at zs0 channel 0 # ttya
-zstty1 at zs0 channel 1 # ttyb
-
-zs1 at sbus? slot ? offset ?
-kbd0 at zs1 channel 0 # keyboard
-ms0 at zs1 channel 1 # mouse
-
-## PCI machines have serial ports:
-## Siemens SAB82532 controller: ttya and ttyb (`su'; sab)
-## Part of NS PC87332VLJ Super I/O controller: kbd/mouse (`se'; com)
-
-## These are two SAB82532 controllers
-#sab0 at ebus? # ttya/ttyb
-#sabtty0 at sab0 channel 0 # ttya
-#sabtty1 at sab0 channel 1 # ttyb
-
-## Part of a PC87332VLJ?
-#ucom0 at ebus? addr 0x3083f8 # `com' driver
-#ucom1 at ebus? addr 0x3062f8 #
-#ucom0 at ebus? # `com' driver
-#ucom1 at ebus? #
-#kbd0 at ucom0 channel 0 # keyboard
-#ms0 at ucom1 channel 1 # mouse
-
-#### Disk controllers and disks
-
-## The following flags may be set for the NCR53c94 based esp driver:
-## bits 0-7: disable disconnect/reselect for the corresponding target
-## bits 8-15: disable synchronous negotiation for target [bit-8]
-
-## sun4u on-board SCSI, and FSBE/S SBus SCSI cards, an NCR53c94 or
-## equivalent behind an LSI Logic DMA controller
-
-dma* at sbus? slot ? offset ? # SBus
-esp* at dma? flags 0x0000 # SBus
-
-scsibus* at esp?
-
-## Qlogic ISP SBus SCSI Card
-isp* at sbus? slot ? offset ?
-scsibus* at isp?
-
-## FAS support missing
-#fas* at sbus? slot ? offset ?
-#scsibus* at fas?
-
-## GLM support missing
-#sym* at pci? # 53C875 "glm" compatible
-#scsibus* at sym?
-
-## These entries find devices on all SCSI busses and assign
-## unit numbers dynamically.
-sd* at scsibus? target ? lun ? # SCSI disks
-st* at scsibus? target ? lun ? # SCSI tapes
-cd* at scsibus? target ? lun ? # SCSI CD-ROMs
-ch* at scsibus? target ? lun ? # SCSI changer devices
-ss* at scsibus? target ? lun ? # SCSI scanners
-uk* at scsibus? target ? lun ? # unknown SCSI
-
-# PCI IDE.
-#pciide* at pci ? dev ? function ? flags 0x0000
-#wd* at pciide? channel ? drive ? flags 0x0000
-#atapibus* at pciide? channel ?
Home |
Main Index |
Thread Index |
Old Index