Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-3]: src/sys/arch/i386/conf Pull up file removal (requested by tro...
details: https://anonhg.NetBSD.org/src/rev/5776f6190344
branches: netbsd-3
changeset: 575983:5776f6190344
user: riz <riz%NetBSD.org@localhost>
date: Wed Jun 01 17:25:52 2005 +0000
description:
Pull up file removal (requested by tron in ticket #363):
Remove unused kernel configuration.
diffstat:
sys/arch/i386/conf/DELPHI | 781 ----------------------------------------------
1 files changed, 0 insertions(+), 781 deletions(-)
diffs (truncated from 785 to 300 lines):
diff -r 823c04577b6e -r 5776f6190344 sys/arch/i386/conf/DELPHI
--- a/sys/arch/i386/conf/DELPHI Wed Jun 01 17:20:03 2005 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,781 +0,0 @@
-# $NetBSD: DELPHI,v 1.50 2005/02/25 13:46:49 simonb Exp $
-#
-# DELPHI -- one of thorpej%zembu.com@localhost's devel machines
-#
-
-include "arch/i386/conf/std.i386"
-
-#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-
-ident "DELPHI-$Revision: 1.50 $"
-
-maxusers 64 # estimated number of users
-
-# CPU support. At least one is REQUIRED.
-#options I386_CPU
-#options I486_CPU
-#options I586_CPU
-options I686_CPU
-
-# CPU-related options.
-#options MATH_EMULATE # floating point emulation
-#options VM86 # virtual 8086 emulation
-options USER_LDT # user-settable LDT; used by WINE
-
-# delay between "rebooting ..." message and hardware reset, in milliseconds
-#options CPURESET_DELAY=2000
-
-# This option allows you to force a serial console at the specified
-# I/O address. see console(4) for details.
-#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
-# you don't want the option below ON iff you are using the
-# serial console option of the new boot strap code.
-#options CONS_OVERRIDE # Always use above! independent of boot info
-
-# The following options override the memory sizes passed in from the boot
-# block. Use them *only* if the boot block is unable to determine the correct
-# values. Note that the BIOS may *correctly* report less than 640k of base
-# memory if the extended BIOS data area is located at the top of base memory
-# (as is the case on most recent systems).
-#options REALBASEMEM=639 # size of base memory (in KB)
-#options REALEXTMEM=15360 # size of extended memory (in KB)
-
-# Standard system options
-
-options INSECURE # disable kernel security levels
-
-options RTC_OFFSET=480 # hardware clock is this many mins. west of GMT
-options NTP # NTP phase/frequency locked loop
-
-options KTRACE # system call tracing via ktrace(1)
-
-options SYSVMSG # System V-like message queues
-options SYSVSEM # System V-like semaphores
-options SYSVSHM # System V-like memory sharing
-#options SHMMAXPGS=2048 # 2048 pages is the default
-
-options LKM # loadable kernel modules
-
-#options USERCONF # userconf(4) support
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
-
-# Diagnostic/debugging support options
-options DIAGNOSTIC # expensive kernel consistency checks
-options POOL_LOGSIZE=1000
-#options DEBUG # expensive debugging checks/support
-#options KMEMSTATS # kernel memory statistics (vmstat -m)
-options DDB # in-kernel debugger
-#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
-options DDB_HISTORY_SIZE=100 # enable history editing in DDB
-#options KGDB # remote debugger
-#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
-makeoptions DEBUG="-g" # compile full symbol table
-
-# Compatibility options
-#options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
-#options COMPAT_09 # NetBSD 0.9
-#options COMPAT_10 # NetBSD 1.0
-#options COMPAT_11 # NetBSD 1.1
-#options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
-#options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
-#options COMPAT_14 # NetBSD 1.4
-#options COMPAT_15 # NetBSD 1.5
-#options COMPAT_16 # NetBSD 1.6
-#options COMPAT_20 # NetBSD 2.0
-#options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
-#options COMPAT_386BSD_MBRPART # recognize old partition ID
-#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
-
-#options COMPAT_SVR4 # binary compatibility with SVR4
-#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
-options COMPAT_LINUX # binary compatibility with Linux
-#options COMPAT_FREEBSD # binary compatibility with FreeBSD
-options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
-
-# File systems
-file-system FFS # UFS
-file-system EXT2FS # second extended file system (linux)
-file-system LFS # log-structured file system
-file-system MFS # memory file system
-file-system NFS # Network File System client
-#file-system NTFS # Windows/NT file system (experimental)
-file-system CD9660 # ISO 9660 + Rock Ridge file system
-file-system MSDOSFS # MS-DOS file system
-file-system FDESC # /dev/fd
-file-system KERNFS # /kern
-#file-system NULLFS # loopback file system
-#file-system OVERLAY # overlay file system
-#file-system PORTAL # portal filesystem (still experimental)
-file-system PROCFS # /proc
-#file-system UMAPFS # NULLFS + uid and gid remapping
-#file-system UNION # union file system
-#file-system CODA # Coda File System; also needs vcoda (below)
-
-# File system options
-#options QUOTA # UFS quotas
-#options FFS_EI # FFS Endian Independent support
-options SOFTDEP # FFS soft updates support.
-options NFSSERVER # Network File System server
-#options FFS_NO_SNAPSHOT # ffs snapshots
-#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
- # immutable) behave as system flags.
-
-# Networking options
-options GATEWAY # packet forwarding
-options INET # IP + ICMP + TCP + UDP
-options INET6 # IPV6
-options IPSEC # IP security
-options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
-#options IPSEC_DEBUG # debug for IP security
-options MROUTING # IP multicast routing
-options PIM # Protocol Independent Multicast
-#options NS # XNS
-#options NSIP # XNS tunneling over IP
-#options ISO,TPIP # OSI
-#options EON # OSI tunneling over IP
-#options CCITT,LLC,HDLC # X.25
-#options NETATALK # AppleTalk networking protocols
-#options PPP_BSDCOMP # BSD-Compress compression support for PPP
-#options PPP_DEFLATE # Deflate compression support for PPP
-#options PPP_FILTER # Active filter support for PPP (requires bpf)
-#options PFIL_HOOKS # pfil(9) packet filter hooks
-#options IPFILTER_LOG # ipmon(8) log support
-#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
-
-options NMBCLUSTERS=16384 # max mbuf clusters (32M)
-
-
-# These options enable verbose messages for several subsystems.
-# Warning, these may compile large string tables into the kernel!
-#options EISAVERBOSE # verbose EISA device autoconfig messages
-options PCIVERBOSE # verbose PCI device autoconfig messages
-#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
-options SCSIVERBOSE # human readable SCSI error messages
-#options USBVERBOSE # verbose USB device autoconfig messages
-#options PNPBIOSVERBOSE # verbose PnP BIOS messages
-
-#options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
-
-#
-# wscons options
-#
-# builtin terminal emulations
-#options WSEMUL_SUN # sun terminal emulation
-options WSEMUL_VT100 # VT100 / VT220 emulation
-# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
-#options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
-#options WS_DEFAULT_FG=WSCOL_WHITE
-#options WS_DEFAULT_BG=WSCOL_BLACK
-#options WS_DEFAULT_COLATTR="(0)"
-#options WS_DEFAULT_MONOATTR="(0)"
-options WS_KERNEL_FG=WSCOL_GREEN
-#options WS_KERNEL_BG=WSCOL_BLACK
-#options WS_KERNEL_COLATTR=""
-#options WS_KERNEL_MONOATTR=""
-# customization of console border color
-#options WSDISPLAY_CUSTOM_BORDER # border customization from wsconsctl(8)
-#options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color
-# compatibility to other console drivers
-options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
-options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
-options WSDISPLAY_COMPAT_USL # VT handling
-options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
-# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
-#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
-# allocate a number of virtual screens at autoconfiguration time
-#options WSDISPLAY_DEFAULTSCREENS=4
-# use a large software cursor that doesn't blink
-options PCDISPLAY_SOFTCURSOR
-
-# Kernel root file system and dump configuration.
-config netbsd root on ? type ?
-#config netbsd root on sd0a type ffs
-#config netbsd root on ? type nfs
-
-#
-# Device configuration
-#
-
-mainbus0 at root
-cpu0 at mainbus0
-#apm0 at mainbus0 # Advanced power management
-
-# Tuning for power management, see apm(4) for more details.
-#options APM_NO_IDLE # Don't call BIOS CPU idle function
-#options APM_V10_ONLY # Use only the APM 1.0 calls
-#options APM_NO_POWEROFF # Don't power off on halt(8)
-#options APM_POWER_PRINT # Don't print stats on the console
-#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
-
-
-# Basic Bus Support
-
-# PCI bus support
-pci* at mainbus? bus ?
-pci* at pchb? bus ?
-pci* at ppb? bus ?
-
-# Configure PCI using BIOS information
-#options PCIBIOS # PCI BIOS support
-#options PCIBIOSVERBOSE # PCI BIOS verbose info
-#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
-#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
-#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
-
-# PCI bridges
-pchb* at pci? dev ? function ? # PCI-Host bridges
-#pceb* at pci? dev ? function ? # PCI-EISA bridges
-pcib* at pci? dev ? function ? # PCI-ISA bridges
-ppb* at pci? dev ? function ? # PCI-PCI bridges
-# XXX 'puc's aren't really bridges, but there's no better place for them here
-#puc* at pci? dev ? function ? # PCI "universal" comm. cards
-
-# EISA bus support
-#eisa* at mainbus?
-#eisa* at pceb?
-
-# ISA bus support
-isa* at mainbus?
-#isa* at pceb?
-isa* at pcib?
-
-# PCMCIA bus support
-#pcmcia* at pcic? controller ? socket ?
-#pcmcia* at tcic? controller ? socket ?
-
-# ISA PCMCIA controllers
-#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
-#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
-#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
-
-# PCI PCMCIA controllers
-#pcic0 at pci? dev? function ?
-
-# ISA Plug-and-Play bus support
-isapnp0 at isa?
-
-# ISA Plug-and-Play PCMCIA controllers
-#pcic* at isapnp?
-
-# CardBus bus support
-#cbb* at pci? dev ? function ?
-#cardslot* at cbb?
-
-#cardbus* at cardslot?
-#pcmcia* at cardslot?
-
-# Coprocessor Support
-
-# Math Coprocessor support
-npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
-
-
-# Console Devices
-
-# ISA console. You can only configure one of these!
-#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
-#vt0 at isa? port 0x60 irq 1 # PCVT console driver
-
-# Keyboard layout configuration for pccons
-#options FRENCH_KBD
-#options FINNISH_KBD
-#options GERMAN_KBD
-#options NORWEGIAN_KBD
-
-# wscons
-pckbc0 at isa? # pc keyboard controller
-pckbd* at pckbc? # PC keyboard
-pms* at pckbc? # PS/2 mouse for wsmouse
-#vga0 at isa?
-vga* at pci? dev ? function ?
-pcdisplay0 at isa? # CGA, MDA, EGA, HGA
-wsdisplay* at vga? console ?
-wsdisplay* at pcdisplay? console ?
-wskbd* at pckbd? console ?
-wsmouse* at pms? mux 0
Home |
Main Index |
Thread Index |
Old Index