[src/trunk]: src/sbin New sentence, new line. From Robert Elz.

[wiz <wiz%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/c29f0941cf76
branches:  trunk
changeset: 537617:c29f0941cf76
user:      wiz <wiz%NetBSD.org@localhost>
date:      Thu Oct 03 15:41:44 2002 +0000

description:
New sentence, new line. From Robert Elz.

diffstat:

 sbin/rcorder/rcorder.8     |  18 +++++----
 sbin/reboot/reboot.8       |  13 ++++---
 sbin/rndctl/rndctl.8       |  11 +++--
 sbin/route/route.8         |   6 +-
 sbin/routed/routed.8       |  17 +++++----
 sbin/savecore/savecore.8   |   5 +-
 sbin/scsictl/scsictl.8     |  80 +++++++++++++++++++++++++--------------------
 sbin/slattach/slattach.8   |  20 ++++++-----
 sbin/sysctl/sysctl.8       |  23 +++++++-----
 sbin/ttyflags/ttyflags.8   |   5 +-
 sbin/wdogctl/wdogctl.8     |  52 ++++++++++++++++-------------
 sbin/wsconsctl/wsconsctl.8 |  11 ++++--
 12 files changed, 144 insertions(+), 117 deletions(-)

diffs (truncated from 630 to 300 lines):

diff -r ad149f5d4df5 -r c29f0941cf76 sbin/rcorder/rcorder.8
--- a/sbin/rcorder/rcorder.8    Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/rcorder/rcorder.8    Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: rcorder.8,v 1.4 2001/11/16 10:25:50 wiz Exp $
+.\"    $NetBSD: rcorder.8,v 1.5 2002/10/03 15:41:44 wiz Exp $
 .\"
 .\" Copyright (c) 1998
 .\"    Perry E. Metzger.  All rights reserved.
@@ -44,9 +44,9 @@
 .Sh DESCRIPTION
 .Nm
 is designed to print out a dependency ordering of a set of
-interdependent files. Typically it is used to find an execution
-sequence for a set of shell scripts in which certain files must be
-executed before others.
+interdependent files.
+Typically it is used to find an execution sequence for a set of
+shell scripts in which certain files must be executed before others.
 .Pp
 Each file passed to
 .Nm
@@ -65,7 +65,8 @@
 and
 .Dq KEYWORD
 lines must appear.
-The format of the lines is rigid. Each line must begin with a single
+The format of the lines is rigid.
+Each line must begin with a single
 .Dq # ,
 followed by a single space, followed by
 .Dq PROVIDE: ,
@@ -75,7 +76,8 @@
 .Dq KEYWORD: .
 No deviation is permitted.
 Each dependency line is then followed by a series of conditions,
-separated by whitespace. Multiple
+separated by whitespace.
+Multiple
 .Dq PROVIDE ,
 .Dq REQUIRE ,
 .Dq BEFORE
@@ -154,5 +156,5 @@
 program first appeared in
 .Nx 1.5 .
 .Sh AUTHORS
-Written by Perry E. Metzger (perry%piermont.com@localhost) and Matthew R.
-Green (mrg%eterna.com.au@localhost).
+Written by Perry E. Metzger (perry%piermont.com@localhost) and
+Matthew R. Green (mrg%eterna.com.au@localhost).
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/reboot/reboot.8
--- a/sbin/reboot/reboot.8      Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/reboot/reboot.8      Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: reboot.8,v 1.16 2002/04/17 16:31:02 wiz Exp $
+.\"    $NetBSD: reboot.8,v 1.17 2002/10/03 15:41:45 wiz Exp $
 .\"
 .\" Copyright (c) 1990, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -73,12 +73,13 @@
 before halting or restarting.
 .It Fl n
 Do not flush the file system cache.
-This option should be used with extreme caution.  It can be used if a disk
-or the processor is on fire.
+This option should be used with extreme caution.
+It can be used if a disk or the processor is on fire.
 .It Fl p
-Attempt to powerdown the system.  If the powerdown fails, or the system
-does not support software powerdown, the system will halt.  This option
-is only valid for
+Attempt to powerdown the system.
+If the powerdown fails, or the system does not support
+software powerdown, the system will halt.
+This option is only valid for
 .Nm halt .
 .It Fl q
 Do not give processes a chance to shut down before halting or restarting.
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/rndctl/rndctl.8
--- a/sbin/rndctl/rndctl.8      Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/rndctl/rndctl.8      Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: rndctl.8,v 1.13 2002/10/01 14:39:51 wiz Exp $
+.\"    $NetBSD: rndctl.8,v 1.14 2002/10/03 15:41:45 wiz Exp $
 .\"
 .\" Copyright (c) 1997 Michael Graff
 .\" All rights reserved.
@@ -67,9 +67,10 @@
 .Fl t .
 .It Fl E
 Disable entropy estimation from the collected timing information for
-the given device name or device type.  If collection is still enabled,
-timing information is still collected and mixed into the internal
-entropy pool, but no entropy is assumed to be present.
+the given device name or device type.
+If collection is still enabled, timing information is still
+collected and mixed into the internal entropy pool,
+but no entropy is assumed to be present.
 .It Fl e
 Enable entropy estimation using the collected timing information
 for the given device name or device type.
@@ -113,7 +114,7 @@
 The
 .Nm
 program was written by
-.An Michael Graff 
+.An Michael Graff
 .Aq explorer%flame.org@localhost .
 .Sh BUGS
 Turning on entropy estimation from unsafe or predictable sources will
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/route/route.8
--- a/sbin/route/route.8        Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/route/route.8        Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: route.8,v 1.29 2002/02/08 13:32:32 hubertf Exp $
+.\"    $NetBSD: route.8,v 1.30 2002/10/03 15:41:46 wiz Exp $
 .\"
 .\" Copyright (c) 1983, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -328,8 +328,8 @@
 .Sh EXIT STATUS
 The
 .Nm
-utility exits 0 on success, and \*[Gt]0 if an error occurs.  This includes
-the use of the
+utility exits 0 on success, and \*[Gt]0 if an error occurs.
+This includes the use of the
 .Cm get
 command to look up a route that is incomplete.
 .Sh EXAMPLES
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/routed/routed.8
--- a/sbin/routed/routed.8      Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/routed/routed.8      Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: routed.8,v 1.37 2002/05/12 15:48:37 wiz Exp $
+.\"    $NetBSD: routed.8,v 1.38 2002/10/03 15:41:46 wiz Exp $
 .\"
 .\" Copyright (c) 1983, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -206,10 +206,10 @@
 if multi-homed to ensure all interfaces are used.
 .Pp
 The Router Discovery standard requires that advertisements
-have a default "lifetime" of 30 minutes.  That means should
-something happen, a client can be without a good route for
-30 minutes.  It is a good idea to reduce the default to 45
-seconds using
+have a default "lifetime" of 30 minutes.
+That means should something happen,
+a client can be without a good route for 30 minutes.
+It is a good idea to reduce the default to 45 seconds using
 .Fl P Cm rdisc_interval=45
 on the command line or
 .Cm rdisc_interval=45
@@ -280,8 +280,8 @@
 This is typically used on a gateway to the Internet,
 or on a gateway that uses another routing protocol whose routes
 are not reported to other local routers.
-Notice that because a metric of 1 is used, this feature is
-dangerous.  It is more commonly accidentally used to create chaos with a
+Notice that because a metric of 1 is used, this feature is dangerous.
+It is more commonly accidentally used to create chaos with a
 routing loop than to solve problems.
 .It Fl h
 cause host or point-to-point routes to not be advertised,
@@ -528,7 +528,8 @@
 The network number must specify a full, 32-bit value, as in 192.0.2.0
 instead of 192.0.2.
 .Pp
-Do not use this feature unless necessary.  It is dangerous.
+Do not use this feature unless necessary.
+It is dangerous.
 .It Cm ripv1_mask Ns \&= Ns Ar nname/mask1,mask2
 specifies that netmask of the network of which
 .Cm nname/mask1
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/savecore/savecore.8
--- a/sbin/savecore/savecore.8  Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/savecore/savecore.8  Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: savecore.8,v 1.26 2001/11/16 11:21:39 wiz Exp $
+.\"    $NetBSD: savecore.8,v 1.27 2002/10/03 15:41:46 wiz Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
 .\"    The Regents of the University of California.  All rights reserved.
@@ -81,7 +81,8 @@
 full bug report should be filed using
 .Xr send-pr 1 ,
 containing as much information as possible about the circumstances of
-the crash.  Since crash dumps are typically very large and may contain
+the crash.
+Since crash dumps are typically very large and may contain
 whatever (potentially confidential) information was in memory at the
 time of the crash, do
 .Em NOT
diff -r ad149f5d4df5 -r c29f0941cf76 sbin/scsictl/scsictl.8
--- a/sbin/scsictl/scsictl.8    Thu Oct 03 07:51:10 2002 +0000
+++ b/sbin/scsictl/scsictl.8    Thu Oct 03 15:41:44 2002 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: scsictl.8,v 1.16 2002/09/03 16:56:05 thorpej Exp $
+.\"    $NetBSD: scsictl.8,v 1.17 2002/10/03 15:41:47 wiz Exp $
 .\"
 .\" Copyright (c) 1998, 2002 The NetBSD Foundation, Inc.
 .\" All rights reserved.
@@ -52,9 +52,9 @@
 .Sh DESCRIPTION
 .Nm
 allows a user or system administrator to issue commands to and otherwise
-control SCSI devices and busses.  It is used by specifying a device or
-bus to manipulate, the command to perform, and any arguments the command
-may require.
+control SCSI devices and busses.
+It is used by specifying a device or bus to manipulate,
+the command to perform, and any arguments the command may require.
 .Nm
 determines if the specified device is an actual device or a SCSI bus
 automatically, and selects the appropriate command set.
@@ -74,35 +74,39 @@
 .Oc
 .Oc
 .Pp
-(Low level) format the named device. If the optional
+(Low level) format the named device.
+If the optional
 .Li blocksize
 parameter is provided, the device geometry will be modified to
 use the specified
 .Li blocksize .
 If this parameter is different form the Current or Default Mode Page 3
 parameters, the device will update Mode Page 3 at the successful
-completion of the Format.  Device geometry may change as a result of
-using a new device
+completion of the Format.
+Device geometry may change as a result of using a new device
 .Li blocksize .
 When the optional
 .Li blocksize
 parameter is specified, the Defect List on the drive will revert to
 the original primary defect list created at the time of manufacture
-if available.  The drive will usually recertify itself
-during the Format and add any other defective blocks to the new Defect
-List.  Some disks may not support the ability to change the blocksize and
-may enter a Degraded Mode when fed a Format command of this type.  If this
-happens the standard recovery for the drive requires issuing a correct
-Format command, i.e. one without the blocksize parameter.
+if available.
+The drive will usually recertify itself during the Format
+and add any other defective blocks to the new Defect List.
+Some disks may not support the ability to change the blocksize and
+may enter a Degraded Mode when fed a Format command of this type.
+If this happens the standard recovery for the drive requires issuing
+a correct Format command, i.e. one without the blocksize parameter.
 .Pp
 When the
 .Li immediate
 parameter is also specified, the disk is instructed to return from the
-format command right away. It continues to format, and every ten seconds
+format command right away.
+It continues to format, and every ten seconds
 .Nm
-issues a TEST UNIT READY command to check the associated sense data. This
-associated sense data has a progress indicator which indicates how far
-the format is progressing. Note well that most SCSI disk drives prior to
+issues a TEST UNIT READY command to check the associated sense data.
+This associated sense data has a progress indicator which indicates
+how far the format is progressing.
+Note well that most SCSI disk drives prior to
 a few years ago do not support this option.
 .Pp
 .Nm identify
@@ -120,8 +124,8 @@
 Issues a
 .Li REASSIGN BLOCKS
 command to the device, adding the specified blocks to the
-grown defect list.  This command is only supported on
-direct access devices.
+grown defect list.
+This command is only supported on direct access devices.
 .Pp
 .Nm release
 .Pp
@@ -137,8 +141,8 @@
 .Pp
 .Nm reset
 .Pp
-Reset the device.  This command is only supported for devices which
-support the
+Reset the device.
+This command is only supported for devices which support the
 .Li SCIOCRESET
 ioctl.
 .Pp
@@ -146,22 +150,22 @@
 .Pp
 Send a
 .Dq START
-command to the device.  This is useful typically only for
-disk devices.
+command to the device.
+This is useful typically only for disk devices.
 .Pp