Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/x68k/conf include GENERIC, instead of defining all ...



details:   https://anonhg.NetBSD.org/src/rev/4cc13f9b92bd
branches:  trunk
changeset: 494322:4cc13f9b92bd
user:      minoura <minoura%NetBSD.org@localhost>
date:      Wed Jul 05 16:19:48 2000 +0000

description:
include GENERIC, instead of defining all the options and devices.

diffstat:

 sys/arch/x68k/conf/ZSCONS |  315 +---------------------------------------------
 1 files changed, 4 insertions(+), 311 deletions(-)

diffs (truncated from 324 to 300 lines):

diff -r b0aaf3065f76 -r 4cc13f9b92bd sys/arch/x68k/conf/ZSCONS
--- a/sys/arch/x68k/conf/ZSCONS Wed Jul 05 16:18:02 2000 +0000
+++ b/sys/arch/x68k/conf/ZSCONS Wed Jul 05 16:19:48 2000 +0000
@@ -1,316 +1,9 @@
-#      $NetBSD: ZSCONS,v 1.13 2000/06/14 22:02:44 veego Exp $
+#      $NetBSD: ZSCONS,v 1.14 2000/07/05 16:19:48 minoura Exp $
 
 #
-#      ZSCONS -- like GENERIC, but use zs console.
+#      ZSCONS -- like GENERIC, but use zs serial console.
 #
 
-include "arch/x68k/conf/std.x68k"
-
-#ident                 "ZSCONS-$Revision: 1.13 $"
-
-maxusers       32
-
-## System kernel configuration.  See options(4) for more detail.
-
-
-## Options for variants of the m68k MPU
-## you must have at least the correct one; REQUIRED
-options        M68030
-options        M68040
-options        M68060
-
-
-#### System options specific to the x68k port
-
-options        EXTENDED_MEMORY         # support for >16MB memory
-options        FPU_EMULATE             # software fpu emulation for MC68030
-options        FPSP                    # floating point emulation for MC68040
-options        M060SP                  # int/fp emulation for MC68060
-options        JUPITER                 # support for "Jupiter-X" accelerator
-#options       MAPPEDCOPY              # use page mapping for large copyin/copyout
-options        ZSCONSOLE,ZSCN_SPEED="9600"     # use serial console
-
-
-#### System options that are the same for all ports
-
-## Root device configuration: change the ?'s if you are going to use a
-## nonstandard root partition (other than where the kernel is booted from)
-## and/or nonstandard root type (not ffs or nfs).  Normally this can be
-## automagically determined at boot time.
-
-config         netbsd  root on ? type ?
-#config                netbsd  root on sd0 type ffs
-
-## RTC is offset from GMT; -540 means JST-9
-options        RTC_OFFSET=-540 # hardware clock is this many mins. west of GMT
-
-## System call tracing (see ktrace(1)).
-options        KTRACE
-
-## Collect statistics on kernel malloc's and free's.  This does have a
-## significant performance hit on slower machines, so it is intended for
-## diagnostic use only.
-#options       KMEMSTATS
-
-## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
-options        SYSVMSG         # System V message queues
-options        SYSVSEM         # System V semaphores
-options        SYSVSHM         # System V shared memory
-#options       SHMMAXPGS=1024  # 1024 pages is the default
-
-## Loadable kernel module support
-#options       LKM
-
-## NFS boot options; not supported currently: needs nfsboot program
-#options       NFS_BOOT_BOOTPARAM
-#options       NFS_BOOT_BOOTP
-#options       NFS_BOOT_DHCP
-
-#### Debugging options
-
-## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
-## serial console break or keyboard reset, where the PROM would normally
-## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
-#options       DDB                     # kernel dynamic debugger
-#options       DDB_HISTORY_SIZE=100    # enable history editing in DDB
-#options       DDB_ONPANIC=1           # see also sysctl(8): `ddb.onpanic'
-#options       PANICBUTTON             # interrupt switch invokes DDB
-
-## You may also use gdb, on another computer connected to this machine over
-## a serial port.  Both KGDBDEV and KGDBRATE should be specified; KGDBDEV is
-## a dev_t encoded device number of the serial port to use.
-## KGDB is not supported for now.
-#options       KGDB            # support for kernel gdb
-#options       KGDBDEV=0xc00   # kgdb device number
-#options       KGDBRATE=9600   # baud rate
-
-## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
-## such that gdb(1) can be used on a kernel coredump.
-
-#makeoptions   DEBUG="-g"
-
-## Adds code to the kernel that does internal consistency checks, and will
-## cause the kernel to panic if corruption of internal data structures
-## is detected.
-#options       DIAGNOSTIC      # extra kernel sanity checking
-
-## Enable (possibly expensive) debugging code that may also display messages
-## on the system console
-#options       DEBUG
-
-## Make SCSI error messages more verbose when explaining their meanings.
-options        SCSIVERBOSE
-
-## `INSECURE' turns off the kernel security level (securelevel = 0 always).
-## This allows writing to /dev/mem, loading kernel modules while multi-user,
-## and other insecurities good only for development work.  Do not use this
-## option on a production machine.
-#options       INSECURE
-
-## Allow non-root users to grab /dev/console with programs such as xconsole.
-## `xconsole' therefore does not need setuid root with this option enabled.
-#options       UCONSOLE
-
-## `FDSCRIPTS' allows non-readable but executable scripts by providing a
-## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
-## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
-## opaque file mechanism.  Perl calls this "secure setuid scripts."
-
-#options       FDSCRIPTS
-#options       SETUIDSCRIPTS
-
-## Options for compatibility with previous releases foreign system binaries.
-
-options        COMPAT_43       # 4.3BSD system interfaces
-options        COMPAT_09       # NetBSD 0.9 binary compatibility
-options        COMPAT_10       # NetBSD 1.0 binary compatibility
-options        COMPAT_11       # NetBSD 1.1 binary compatibility
-options        COMPAT_12       # NetBSD 1.2 binary compatibility
-options        COMPAT_13       # NetBSD 1.3 binary compatibility
-options        COMPAT_14       # NetBSD 1.4 binary compatibility
-#options       COMPAT_M68K4K   # NetBSD/m68k4k binaries
-#options       COMPAT_SUNOS    # SunOS 4.x binary compatibility; broken
-#options       COMPAT_SVR4     # SVR4 binary compatibility; broken
-#options       COMPAT_LINUX    # Linux/m68k binary compatibility
-#options       EXEC_ELF32      # 32-bit ELF executables (Linux, SVR4)
-
-## File systems.
-file-system    FFS             # Berkeley Fast Filesystem
-file-system    NFS             # Sun NFS-compatible filesystem client
-file-system    KERNFS          # kernel data-structure filesystem
-#file-system   NULLFS          # NULL layered filesystem (buggy)
-#file-system   OVERLAY         # overlay file system
-file-system    MFS             # memory-based filesystem
-#file-system   FDESC           # user file descriptor filesystem
-file-system    UMAPFS          # uid/gid remapping filesystem
-#file-system   LFS             # Log-structured filesystem (experimental)
-#file-system   PORTAL          # portal filesystem (experimental)
-file-system    PROCFS          # /proc
-file-system    CD9660          # ISO 9660 + Rock Ridge file system
-#file-system   UNION           # union file system (a little buggy)
-file-system    MSDOSFS         # MS-DOS FAT filesystem(s).
-#file-system   ADOSFS          # AmigaDOS filesystem
-
-## File system options.
-options        NFSSERVER       # Sun NFS-compatible filesystem server
-options        QUOTA           # FFS quotas
-#options       FFS_EI          # FFS Endian Independent support
-#options       SOFTDEP         # FFS soft updates support.
+include "arch/x68k/conf/GENERIC"
 
-## Network protocol support.  In most environments, INET is required.
-options        INET            # IP (Internet Protocol) v4
-options        INET6           # IPV6
-#options       IPSEC           # IP security
-#options       IPSEC_ESP       # IP security (encryption part; define w/IPSEC)
-#options       IPSEC_DEBUG     # debug for IP security
-options        TCP_COMPAT_42   # 4.2BSD IP implementation compatibility
-#options       GATEWAY         # packet forwarding ("router switch")
-#options       MROUTING        # packet forwarding of multicast packets
-#options       DIRECTED_BROADCAST      # allow broadcasts through routers
-#options       NS              # Xerox NS networking
-#options       NSIP            # Xerox NS tunneling over IP
-#options       ISO,TPIP        # OSI networking
-#options       EON             # OSI tunneling over IP
-#options       CCITT,LLC,HDLC  # X.25 packet switched protocol
-options        NETATALK        # AppleTalk (over Ethernet) protocol
-options        NTP             # Network Time Protocol in-kernel support
-#options       PPS_SYNC        # Add serial line synchronization for NTP
-options        PFIL_HOOKS      # Add pfil(9) hooks, intended for custom LKMs.
-options        IPFILTER_LOG    # Add ipmon(8) logging for ipfilter device
-options        PPP_BSDCOMP     # Add BSD compression to ppp device
-options        PPP_DEFLATE     # Add deflate (libz) compression to ppp device
-options        PPP_FILTER      # Add active filters for ppp (via bpf)
-
-
-
-#### Device configurations
-
-## Fundamental devices; see also std.x68k
-dmac0  at intio0 addr 0xe84000         # DMA controler
-xel0   at intio0
-opm0   at intio0 addr 0xe90000         # OPM: required for fdc
-
-## Display devices and console
-grfbus0        at mainbus0                     # bitmapped displays
-grf0   at grfbus0                      # multiplane graphics
-grf1   at grfbus0                      # flexible graphics
-
-#kbd0  at mfp0                         # standard keyboard
-#ite0  at grf0                         # internal terminal emulator
-#options       ITE_KERNEL_ATTR=4       # bold for kernel messages
-                                       # see /sys/arch/x68k/dev/itevar.h
-pseudo-device  pow             2       # software power switch
-
-## floppy disks
-fdc0   at intio0 addr 0xe94000 intr 96 dma 0 dmaintr 100 # floppy controler
-fd*    at fdc0 unit ?                  # builtin floppy drives
-
-## SCSI devices
-scsirom0 at intio0 addr 0xfc0000               # Built-in SCSI BIOS
-scsirom1 at intio0 addr 0xea0020               # External SCSI BIOS
-spc0   at scsirom0                             # genuin SCSI
-spc1   at scsirom1                             # genuin SCSI
-scsibus* at spc?
-mha0   at scsirom1                             # Mankai MK-HA1 (Mach-2)
-scsibus* at mha0
-
-sd*    at scsibus? target ? lun ?      # SCSI disks
-cd*    at scsibus? target ? lun ?      # SCSI CD-ROMs
-st*    at scsibus? target ? lun ?      # SCSI tapes
-#ss*   at scsibus? target ? lun ?      # SCSI scanners
-ch*    at scsibus? target ? lun ?      # SCSI changer devices
-#uk*   at scsibus? target ? lun ?      # SCSI unknown devices
-
-## Ports
-zsc0   at intio0 addr 0xe98000 intr 112
-zstty0 at zsc0 channel 0               # built-in RS-232C
-ms0    at zsc0 channel 1               # standard mouse
-#zsc1  at intio0 addr 0xeafc00 intr 113
-#zstty2        at zsc1 channel 0
-#zstty3        at zsc1 channel 1
-#zsc2  at intio0 addr 0xeafc10 intr 114
-#zstty4        at zsc2 channel 0
-#zstty5        at zsc2 channel 1
-par0   at intio0 addr 0xe8c000         # Builtin printer port
-
-pseudo-device  sram                    # battery-backuped static RAM
-pseudo-device  bell                    # OPM bell
-
-xcom0  at mainbus0                     # NS16550 fast serial
-xcom1  at mainbus0
-
-## Audio device; broken
-#okiadpcm0 at intio0 addr 0xe92000 intr 106 errintr 107 dma 3
-#audio*        at okiadpcm*
-
-## Network interfaces
-neptune0 at intio0 addr 0xece000 intr 249      # Neptune-X
-neptune1 at intio0 addr 0xece400 intr 249      # Neptune-X at alt. addr.
-ne0    at neptune? addr 0x300                  # NE2000 or clone
-#se0   at scsibus? target ? lun ?              # Ether+; broken
-
-
-#### Pseudo devices
-
-## A disk-like interface to files.  Can be used to create floppy, CD,
-## miniroot images, etc.
-
-pseudo-device  vnd     4
-
-## Concatenated and striped disks; with this, you can create a software-based
-## disk array similar to a "RAID 0" setup.  See ccd(4).
-
-pseudo-device  ccd     4
-
-## RAIDframe disk driver: software RAID driver.  See raid(4).
-
-pseudo-device  raid    4
-#options       RAID_AUTOCONFIG         # auto-configuration of RAID components
-
-## Memory disk device, used on boot floppies with compressed
-## kernel-plus-root-disk images.
-
-#pseudo-device md      1
-
-## Loopback network interface; required
-pseudo-device  loop
-
-## SLIP and CSLIP interfaces, for IP over a serial line.
-pseudo-device  sl              1
-
-## PPP, the successor to SLIP.  See pppd(8).
-pseudo-device  ppp             1
-
-## Network "tunnel" device, allowing protocol stacks to run in the userland.
-## This is used by the third-party user-mode "ppp" program, and others.
-pseudo-device  tun             4
-
-## Generic L3 over IP tunnel
-#pseudo-device gre             2       # generic L3 over IP tunnel
-
-## Berkeley Packet Filter, required to run RARPD.  A generic C-language
-## interface that allows selective examining of incoming packets.
-pseudo-device  bpfilter        8



Home | Main Index | Thread Index | Old Index