Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-1-5]: src/distrib/notes/i386 Pull up revision 1.103 (requested by...
details: https://anonhg.NetBSD.org/src/rev/e2fa68f83136
branches: netbsd-1-5
changeset: 493027:e2fa68f83136
user: he <he%NetBSD.org@localhost>
date: Fri Mar 29 23:09:15 2002 +0000
description:
Pull up revision 1.103 (requested by he):
Expand tabulators for reasonable .html formatting.
diffstat:
distrib/notes/i386/hardware | 150 ++++++++++++++++++++++----------------------
1 files changed, 75 insertions(+), 75 deletions(-)
diffs (254 lines):
diff -r db99a55451cd -r e2fa68f83136 distrib/notes/i386/hardware
--- a/distrib/notes/i386/hardware Fri Mar 29 22:51:48 2002 +0000
+++ b/distrib/notes/i386/hardware Fri Mar 29 23:09:15 2002 +0000
@@ -1,4 +1,4 @@
-.\" $NetBSD: hardware,v 1.71.2.20 2002/03/25 17:58:32 he Exp $
+.\" $NetBSD: hardware,v 1.71.2.21 2002/03/29 23:09:15 he Exp $
.
.Nx \*V
runs on ISA (AT-Bus), EISA, PCI, and VL-bus systems
@@ -615,170 +615,170 @@
be configured as follows:
.\"(disp
.Bd -literal
-Device Name Port IRQ DRQ Misc
------- ---- ---- --- --- ----
-Serial ports com0 0x3f8 4 [8250/16450/16550/clones]
- com1 0x2f8 3 [8250/16450/16550/clones]
- com2 0x3e8 5 [8250/16450/16550/clones]
+Device Name Port IRQ DRQ Misc
+------ ---- ---- --- --- ----
+Serial ports com0 0x3f8 4 [8250/16450/16550/clones]
+ com1 0x2f8 3 [8250/16450/16550/clones]
+ com2 0x3e8 5 [8250/16450/16550/clones]
-Parallel ports lpt0 0x378 7 [interrupt-driven or polling]
- lpt1 0x278 [polling only]
- lpt2 0x3bc [polling only]
+Parallel ports lpt0 0x378 7 [interrupt-driven or polling]
+ lpt1 0x278 [polling only]
+ lpt2 0x3bc [polling only]
Floppy controller
- fdc0 0x3f0 6 2 [supports two disks]
+ fdc0 0x3f0 6 2 [supports two disks]
AHA-154x, AHA-174x (in compatibility mode), or BT-54x SCSI host adapters
- aha0 0x330 any any
- aha1 0x334 any any
+ aha0 0x330 any any
+ aha1 0x334 any any
AHA-174x SCSI host adapters (in enhanced mode)
- ahb0 any any any
+ ahb0 any any any
AHA-152x, AIC-6260- or AIC-6360-based SCSI host adapters
- aic0 0x340 11 6
+ aic0 0x340 11 6
-AHA-2X4X or AIC-7xxx-based SCSI host adapters [precise list: see NetBSD
- ahc0 any any any System Requirements and
- Supported Devices]
+AHA-2X4X or AIC-7xxx-based SCSI host adapters [precise list: see NetBSD
+ ahc0 any any any System Requirements and
+ Supported Devices]
AdvanSys ABP-9x0[U][A] SCSI host adapters
- adv0 any any any
+ adv0 any any any
AdvanSys ABP-940UW[68], ABP-970UW[68], ASB3940UW-00 SCSI host adapters
- adw0 any any any
+ adw0 any any any
AMD PCscsi-PCI based SCSI host adapters
- pcscp0 any any any
+ pcscp0 any any any
BusLogic BT445, BT74x, or BT9xx SCSI host adapters
- bha0 0x330 any any
- bha1 0x334 any any
+ bha0 0x330 any any
+ bha1 0x334 any any
Seagate/Future Domain SCSI
- sea0 any 5 any iomem 0xd8000
+ sea0 any 5 any iomem 0xd8000
Symbios Logic/NCR 53C8xx, 53c1010-33 and 53c1510D based PCI SCSI host adapters
- siop0 any any any
+ siop0 any any any
Ultrastor 14f, 24f (if it works), or 34f SCSI host adapters
- uha0 0x330 any any
- uha1 0x340 any any
+ uha0 0x330 any any
+ uha1 0x340 any any
Western Digital WD7000 based ISA SCSI host adapters
- wds0 0x350 15 6
- wds1 0x358 11 5
+ wds0 0x350 15 6
+ wds1 0x358 11 5
PCI IDE hard disk controllers
- pciide0 any any any [supports four devices]
+ pciide0 any any any [supports four devices]
MFM/ESDI/IDE/RLL hard disk controllers
- wdc0 0x1f0 14 [supports two devices]
- wdc1 0x170 15 [supports two devices]
+ wdc0 0x1f0 14 [supports two devices]
+ wdc1 0x170 15 [supports two devices]
-ATA disks wd0, wd1, ...
+ATA disks wd0, wd1, ...
SCSI and ATAPI disks sd0, sd1, ...
-SCSI tapes st0, st1, ...
+SCSI tapes st0, st1, ...
SCSI and ATAPI CD-ROMs cd0, cd1, ...
- For each SCSI and IDE controller found, the SCSI or ATA(PI) devices
- present on the bus are probed in increasing ID order for SCSI and
- master/slave order for ATA(PI). So the first SCSI drive found will
- be called sd0, the second sd1, and so on ...
+ For each SCSI and IDE controller found, the SCSI or ATA(PI) devices
+ present on the bus are probed in increasing ID order for SCSI and
+ master/slave order for ATA(PI). So the first SCSI drive found will
+ be called sd0, the second sd1, and so on ...
StarLAN cards
- ai0 0x360 7 any iomem 0xd0000
+ ai0 0x360 7 any iomem 0xd0000
FMV-180 series cards
- fmv0 0x2a0 any
+ fmv0 0x2a0 any
AT1700 cards
- ate0 0x2a0 any
+ ate0 0x2a0 any
Intel EtherExpress/16 cards
- ix0 0x300 10
+ ix0 0x300 10
Intel EtherExpress PRO 10 ISA cards
- iy0 0x360 any
+ iy0 0x360 any
CS8900 Ethernet cards
- cs0 0x300 any any
+ cs0 0x300 any any
3Com 3c501 Ethernet cards
- el0 0x300 9
+ el0 0x300 9
3Com 3c503 Ethernet cards
- ec0 0x250 9 iomem 0xd8000
+ ec0 0x250 9 iomem 0xd8000
3Com 3c505 Ethernet cards
- eg0 0x280 9
+ eg0 0x280 9
3Com 3c507 Ethernet cards
- ef0 0x360 7 iomem 0xd0000
+ ef0 0x360 7 iomem 0xd0000
Novell NE1000, or NE2000 Ethernet boards
- ne0 0x280 9
- ne1 0x300 10
+ ne0 0x280 9
+ ne1 0x300 10
Novell NE2100 Ethernet boards
- ne2 0x320 9 7
+ ne2 0x320 9 7
BICC IsoLan cards
- ne3 0x320 10 7
+ ne3 0x320 10 7
SMC/WD 8003, 8013, Elite16, and Elite16 Ultra Ethernet boards
- we0 0x280 9 iomem 0xd0000
- we1 0x300 10 iomem 0xcc000
+ we0 0x280 9 iomem 0xd0000
+ we1 0x300 10 iomem 0xcc000
3COM 3c509 or 3COM 3c579 Ethernet boards
- ep0 any any
+ ep0 any any
3COM 3x59X PCI Ethernet boards
- ep0 any any [you must assign an interrupt in your
- PCI BIOS, or let it do so for you]
+ ep0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
3COM 3x90X PCI Ethernet boards
- ex0 any any [you must assign an interrupt in your
- PCI BIOS, or let it do so for you]
+ ex0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
Intel EtherExpress PRO 10 ISA
- iy0 0x360 any
+ iy0 0x360 any
Intel EtherExpress 100 Fast Ethernet adapters
- fxp0 any any [you must assign an interrupt in your
- PCI BIOS, or let it do so for you]
+ fxp0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
SMC91C9x based Ethernet cards
- sm0 0x300 10
+ sm0 0x300 10
PCnet-PCI based Ethernet boards; see above for partial list
- le0 any any [you must assign an interrupt in your
- PCI BIOS, or let it do so for you]
+ le0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
DC21x4x based Ethernet boards; see above for partial list
- de0 any any [you must assign an interrupt in your
- PCI BIOS, or let it do so for you]
+ de0 any any [you must assign an interrupt in your
+ PCI BIOS, or let it do so for you]
Digital EtherWORKS III (DE203/DE204/DE205) LEMAC
- lc0 0x320 any
+ lc0 0x320 any
Qlogic ISP [12]0x0 SCSI/FibreChannel boards
- isp0 any any
+ isp0 any any
Efficient Networks EN-155 and Adaptec AIC-590x ATM interfaces
- en0 any any
+ en0 any any
SMC EPIC/100 Fast Ethernet boards
- epic0 any any
+ epic0 any any
Texas Instruments ThunderLAN based ethernet boards
- tl0 any any
+ tl0 any any
VIA VT3043(Rhine) and VT86C100A(Rhine-II) based ethernet boards
- vr0 any any
+ vr0 any any
IBM TROPIC based Token-Ring cards
- tr0 0xa20 any iomem 0xd8000
- tr1 0xa24 any iomem 0xd0000
- tr2 any any
+ tr0 0xa20 any iomem 0xd8000
+ tr1 0xa24 any iomem 0xd0000
+ tr2 any any
.disp)
Home |
Main Index |
Thread Index |
Old Index