Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/evbsh3/conf Computex's SH7750 evaluation board
details: https://anonhg.NetBSD.org/src/rev/cf1e0770c8bd
branches: trunk
changeset: 483912:cf1e0770c8bd
user: msaitoh <msaitoh%NetBSD.org@localhost>
date: Mon Mar 20 20:11:00 2000 +0000
description:
Computex's SH7750 evaluation board
diffstat:
sys/arch/evbsh3/conf/COMPUTEX7750 | 159 ++++++++++++++++++++++++++++++++++++++
1 files changed, 159 insertions(+), 0 deletions(-)
diffs (163 lines):
diff -r 30d791e6fa1d -r cf1e0770c8bd sys/arch/evbsh3/conf/COMPUTEX7750
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/evbsh3/conf/COMPUTEX7750 Mon Mar 20 20:11:00 2000 +0000
@@ -0,0 +1,159 @@
+# $NetBSD: COMPUTEX7750,v 1.1 2000/03/20 20:11:00 msaitoh Exp $
+#
+# GENERIC -- everything that's currently supported
+#
+
+include "arch/evbsh3/conf/std.evbsh3"
+
+# Enable the hooks used for initializing the root memory-disk.
+options MEMORY_DISK_HOOKS
+options MEMORY_DISK_IS_ROOT # force root on memory disk
+options MEMORY_DISK_SERVER=0 # no userspace memory disk support
+options MINIROOTSIZE=2880 # size of memory disk, in blocks
+
+maxusers 16 # estimated number of users
+
+# CPU support
+options SH7750
+options SH4
+options SH4_PCMCIA
+options EVBSH4
+options MMEYE
+#options MMEYE_NEW_INT
+#options MMEYE_50M
+#options MMEYE_NO_CACHE
+options PCLOCK=33333300 # 33.3333MHz
+options IOM_ROM_BEGIN=0x00000000
+options IOM_ROM_SIZE=0x00100000 # 1MB
+options IOM_RAM_BEGIN=0x8c000000
+options IOM_RAM_SIZE=0x02000000 # 32MB
+options INITTODR_ALWAYS_USE_RTC
+options BRAINS
+options USE_RTCCLK
+options SYNC_CLOCK_TO_RTC
+
+options TEXT_START_ADDR=0x88010000
+
+options BSC_BCR1_VAL =0x0000000c
+options BSC_BCR2_VAL =0xff34
+options BSC_WCR1_VAL =0x07770777
+options BSC_WCR2_VAL =0xffff4e27
+options BSC_WCR3_VAL =0x07777777
+#options BSC_MCR_VAL =0xc0010014
+options BSC_MCR_VAL =0x80010014
+#options BSC_PCR_VAL =0x08eb
+options BSC_RTCSR_VAL =0xa508
+#options BSC_RTCNT_VAL =0xa500
+options BSC_RTCOR_VAL =0xa582
+#options BSC_RFCR_VAL =0xa400
+options FRQCR_VAL =0x0e23
+options BSC_SDMR3_VAL =0xff940110
+
+# Standard system options
+#options UCONSOLE # users can use TIOCCONS (for xconsole)
+#options INSECURE # disable kernel security levels
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+options HZ=64 # clock interrupt generates every 1/HZ sec
+#options NTP # NTP phase/frequency locked loop
+
+#options KTRACE # system call tracing via ktrace(1)
+options PMAP_NEW # new pmap interface
+
+#options SYSVMSG # System V-like message queues
+#options SYSVSEM # System V-like semaphores
+#options SYSVSHM # System V-like memory sharing
+#options SHMMAXPGS=1024 # 1024 pages is the default
+
+# Diagnostic/debugging support options
+#options DIAGNOSTIC # cheap kernel consistency checks
+#options DEBUG # expensive debugging checks/support
+#options DDB # in-kernel debugger
+#makeoptions DEBUG="-g" # compile full symbol table
+#options SYSCALL_DEBUG
+#options UVMHIST
+#options UVMHIST_PRINT
+
+# Compatibility options
+options COMPAT_13 # NetBSD 1.3
+options COMPAT_43 # and 4.3BSD
+
+# Executable format options
+options EXEC_COFF # COFF executables
+#options EXEC_ELF32 # 32-bit ELF executables
+
+# File systems
+file-system FFS # UFS
+file-system MFS # memory file system
+#file-system NFS # Network File System client
+#file-system PROCFS # /proc
+#file-system KERNFS # /kern
+file-system NULLFS # loopback file system
+file-system UMAPFS # NULLFS + uid and gid remapping
+
+# File system options
+#options QUOTA # UFS quotas
+#options NFSSERVER # Network File System server
+
+# Networking options
+#options INET # IP + ICMP + TCP + UDP
+#options NFS_BOOT_DHCP # Support DHCP NFS root
+
+#options PCIVERBOSE # verbose PCI device autoconfig messages
+#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
+
+# Kernel root file system and dump configuration.
+#config netbsd root on ? type nfs
+#config netbsd root on wd0a type ffs
+config netbsd root on ? type ffs
+
+#
+# Device configuration
+#
+
+mainbus0 at root
+
+shb* at mainbus?
+
+# Serial Devices
+
+options SCICONSOLE,SCICN_SPEED=115200
+sci0 at shb? port 0xffe00000 irq 11
+
+#options SCIFCN_SPEED=115200
+#scif0 at shb? port 0xffe80000 irq 12
+
+#com0 at shb? port 0xa4000000 irq 11
+#com1 at shb? port 0xa4000008 irq 12
+
+# SH PCMCIA controllers
+#shpcic0 at shb? port 0xb000000a iomem 0xb8000000 iosiz 0x1000000
+#shpcic1 at shb? port 0xb000000c iomem 0xb9000000 iosiz 0x1000000
+
+# PCMCIA bus support
+#pcmcia* at shpcic? controller ? socket ?
+
+#com* at pcmcia? function ? # Modems and serial cards
+#wdc* at pcmcia? function ?
+#wd* at wdc? drive ? # the drives themselves
+
+#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
+#mbe* at pcmcia? function ? # MB8696x based Ethernet
+#ne* at pcmcia? function ? # NE2000-compatible Ethernet
+#sm* at pcmcia? function ? # Megahertz Ethernet
+
+#pseudo-device vnd 4 # disk-like interface to files
+#pseudo-device bpfilter 8 # Berkeley packet filter
+#pseudo-device ipfilter # IP filter (firewall) and NAT
+#pseudo-device loop # network loopback
+pseudo-device pty 16 # pseudo-terminals
+#pseudo-device ppp 2 # Point-to-Point Protocol
+#pseudo-device tun 2 # network tunneling over tty
+
+# Enable the hooks used for initializing the root memory-disk.
+#options MEMORY_DISK_HOOKS
+#options MEMORY_DISK_IS_ROOT # force root on memory disk
+#options MEMORY_DISK_SERVER=0 # no userspace memory disk support
+#options MINIROOTSIZE=3074 # size of memory disk, in blocks
+
+pseudo-device md 1 # memory disk device (ramdisk)
Home |
Main Index |
Thread Index |
Old Index