Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/sa11x0 Update from hpcarm to remove iPAQ and Jo...
details: https://anonhg.NetBSD.org/src/rev/112bfddcec3c
branches: trunk
changeset: 513398:112bfddcec3c
user: rjs <rjs%NetBSD.org@localhost>
date: Mon Jul 30 15:58:56 2001 +0000
description:
Update from hpcarm to remove iPAQ and Jornada specific #defines.
diffstat:
sys/arch/arm/sa11x0/sa11x0_gpioreg.h | 118 +++++++---------------------------
1 files changed, 24 insertions(+), 94 deletions(-)
diffs (132 lines):
diff -r db7a35b56bc6 -r 112bfddcec3c sys/arch/arm/sa11x0/sa11x0_gpioreg.h
--- a/sys/arch/arm/sa11x0/sa11x0_gpioreg.h Mon Jul 30 15:31:49 2001 +0000
+++ b/sys/arch/arm/sa11x0/sa11x0_gpioreg.h Mon Jul 30 15:58:56 2001 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: sa11x0_gpioreg.h,v 1.1 2001/07/08 23:37:53 rjs Exp $ */
+/* $NetBSD: sa11x0_gpioreg.h,v 1.2 2001/07/30 15:58:56 rjs Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
@@ -69,99 +69,29 @@
#define GPIO(x) (0x00000001 << (x))
/*
- * iPAQ H3600 specific parameter
+ * SA-11x0 GPIOs parameter
*/
/*
-port I/O(Active) name desc
-0 I(L) PWR_ON# button detect: power-on
-1 I(L) IP_IRQ# cpu-interrupt
-2...9 O LDD{8..15} LCD DATA(8-15)
-10 I(L) CARD_IND1# PCMCIA Socket1 inserted detection
-11 I(L) CARD_IRQ1# PCMCIA slot1 IRQ
-12 O CLK_SET0 clock select 0 for audio codec
-13 O CLK_SET1 clock select 1 for audio codec
-14 I/O L3_SDA UDA1341 L3DATA
-15 O L3_MODE UDA1341 L3MODE
-16 O L3_SCLK UDA1341 L3SCLK
-17 I(L) CARD_IND0# PCMCIA Socket0 inserted detection
-18 I(L) KEY_ACT# button detect: center button
-19 I SYS_CLK Stereo audio codev external clock
-20 I(H) BAT_FAULT Battery fault
-21 I(L) CARD_IRQ0# PCMCIA slot0 IRQ
-22 I(L) LOCK# expansion pack lock/unlock signal
-23 I(H) COM_DCD RS-232 DCD
-24 I(H) OPT_IRQ expansion pach shared IRQ
-25 I(H) COM_CTS RS-232 CTS
-26 O(H) COM_RTS RS-232 RTS
-27 O(L) OPT_DETECT# Indicates presence of expansion pack inserted
-
-Extended GPIO
-0 O(H) VPEN Enables programming and erasing of Flash
-1 O(H) CARD_RESET CF/PCMCIA card reset signal
-2 O(H) OPT_RESET Expansion pack reset signal
-3 O(L) CODEC_RESET# onboard codec reset signal
-4 O(H) OPT_NVRAM_ON Enables power supply to the NVRAM of the
- Expansion pack.(=OPT_ON)
-5 O(H) OPT_ON Enables full power supply to the Expansion pack.
-6 O(H) LCD_ON Enables LCD 3.3V power supply
-7 O(H) RS232_ON Enables RS232
-8 O(H) LCD_PCI Enables power to LCD control IC
-9 O(H) IR_ON Enables power to IR module
-10 O(H) AUD_ON Enables power to audio output amp.
-11 O(H) AUD_PWR_ON Enables power to all audio modules.
-12 O(H) QMUTE Mutes yhe onboard audio codec
-13 O IR_FSEL FIR mode selection:H=FIR,L=SIR
-14 O(H) LCD_5V_ON Enables 5V to the LCD module
-15 O(H) LVDD_ON Enables 9V and -6.5V to the LCD module
+port name desc
+0 Reserved
+1 Reserved
+2...9 LDD{8..15} LCD DATA(8-15)
+10 SSP_TXD SSP transmit
+11 SSP_RXD SSP receive
+12 SSP_SCLK SSP serial clock
+13 SSP_SFRM SSP frameclock
+14 UART_TXD UART transmit
+15 UART_RXD UART receive
+16 GPCLK_OUT General-purpose clock out
+17 Reserved
+18 UART_SCLK Sample clock input
+19 SSP_CLK Sample clock input
+20 UART_SCLK3 Sample clock input
+21 MCP_CLK MCP dock in
+22 TREQA Either TIC request A
+23 TREQB Either TIC request B
+24 Reserved
+25 RTC Real Time Clock
+26 RCLK_OUT internal clock /2
+27 32KHZ_OUT Raw 32.768kHz osc output
*/
-
-#define GPIO_H3600_POWER_BUTTON GPIO (0)
-#define GPIO_H3600_PCMCIA_CD0 GPIO (17)
-#define GPIO_H3600_PCMCIA_CD1 GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ0 GPIO (21)
-#define GPIO_H3600_PCMCIA_IRQ1 GPIO (11)
-#define GPIO_H3600_OPT_LOCK GPIO (22)
-#define GPIO_H3600_OPT_IRQ GPIO (24)
-#define GPIO_H3600_OPT_DETECT GPIO (27)
-
-#define EGPIO_H3600_VPEN GPIO (0)
-#define EGPIO_H3600_CARD_RESET GPIO (1)
-#define EGPIO_H3600_OPT_RESET GPIO (2)
-#define EGPIO_H3600_CODEC_RESET GPIO (3)
-#define EGPIO_H3600_OPT_NVRAM_ON GPIO (4)
-#define EGPIO_H3600_OPT_ON GPIO (5)
-#define EGPIO_H3600_LCD33_ON GPIO (6)
-#define EGPIO_H3600_RS232_ON GPIO (7)
-#define EGPIO_H3600_LCD_PCI GPIO (8)
-#define EGPIO_H3600_IR_ON GPIO (9)
-#define EGPIO_H3600_AUD_ON GPIO (10)
-#define EGPIO_H3600_AUD_PWRON GPIO (11)
-#define EGPIO_H3600_QMUTE GPIO (12)
-#define EGPIO_H3600_IR_FSEL GPIO (13)
-#define EGPIO_H3600_LCD5_ON GPIO (14)
-#define EGPIO_H3600_LVDD_ON GPIO (15)
-
-#define EGPIO_INIT (EGPIO_H3600_OPT_NVRAM_ON| \
- EGPIO_H3600_LCD33_ON| \
- EGPIO_H3600_LCD_PCI| \
- EGPIO_H3600_AUD_ON) & 0xFFFF
-
-#define EGPIO_LCD_INIT EGPIO_H3600_LCD33_ON| \
- EGPIO_H3600_LCD_PCI| \
- EGPIO_H3600_LCD5_ON| \
- EGPIO_H3600_LVDD_ON
-
-#define IRQ_H3600_POWER_BUTTON IRQ_GPIO0
-#define IRQ_H3600_PCMCIA_CD0 IRQ_GPIO17
-#define IRQ_H3600_PCMCIA_CD1 IRQ_GPIO10
-#define IRQ_H3600_PCMCIA_IRQ0 IRQ_GPIO21
-#define IRQ_H3600_PCMCIA_IRQ1 IRQ_GPIO11
-#define IRQ_H3600_OPT_IRQ IRQ_GPIO24
-#define IRQ_H3600_OPT_DETECT IRQ_GPIO27
-
-/*
- * JORNADA720 specific parameter
- */
-
-#define JORNADA720_KBD_IRQ GPIO (0)
-#define JORNADA720_MOUSE_IRQ GPIO (9)
Home |
Main Index |
Thread Index |
Old Index