Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/i386/conf Remove unused kernel configuration.



details:   https://anonhg.NetBSD.org/src/rev/c2f1ecf4d6ac
branches:  trunk
changeset: 581384:c2f1ecf4d6ac
user:      tron <tron%NetBSD.org@localhost>
date:      Wed Jun 01 09:44:12 2005 +0000

description:
Remove unused kernel configuration.

diffstat:

 sys/arch/i386/conf/DELPHI |  782 ----------------------------------------------
 1 files changed, 0 insertions(+), 782 deletions(-)

diffs (truncated from 786 to 300 lines):

diff -r bcc0c37eca33 -r c2f1ecf4d6ac sys/arch/i386/conf/DELPHI
--- a/sys/arch/i386/conf/DELPHI Wed Jun 01 09:16:07 2005 +0000
+++ /dev/null   Thu Jan 01 00:00:00 1970 +0000
@@ -1,782 +0,0 @@
-#      $NetBSD: DELPHI,v 1.51 2005/03/25 23:28:44 cube Exp $
-#
-#      DELPHI -- one of thorpej%zembu.com@localhost's devel machines
-#
-
-include "arch/i386/conf/std.i386"
-
-#options       INCLUDE_CONFIG_FILE     # embed config file in kernel binary
-
-ident          "DELPHI-$Revision: 1.51 $"
-
-maxusers       64              # estimated number of users
-
-# CPU support.  At least one is REQUIRED.
-#options       I386_CPU
-#options       I486_CPU
-#options       I586_CPU
-options        I686_CPU
-
-# CPU-related options.
-#options       MATH_EMULATE    # floating point emulation
-#options       VM86            # virtual 8086 emulation
-options        USER_LDT        # user-settable LDT; used by WINE
-
-# delay between "rebooting ..." message and hardware reset, in milliseconds
-#options       CPURESET_DELAY=2000
-
-# This option allows you to force a serial console at the specified
-# I/O address.   see console(4) for details.
-#options       CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
-#      you don't want the option below ON iff you are using the
-#      serial console option of the new boot strap code.
-#options       CONS_OVERRIDE   # Always use above! independent of boot info
-
-# The following options override the memory sizes passed in from the boot
-# block.  Use them *only* if the boot block is unable to determine the correct
-# values.  Note that the BIOS may *correctly* report less than 640k of base
-# memory if the extended BIOS data area is located at the top of base memory
-# (as is the case on most recent systems).
-#options       REALBASEMEM=639         # size of base memory (in KB)
-#options       REALEXTMEM=15360        # size of extended memory (in KB)
-
-# Standard system options
-
-options        INSECURE        # disable kernel security levels
-
-options        RTC_OFFSET=480  # hardware clock is this many mins. west of GMT
-options        NTP             # NTP phase/frequency locked loop
-
-options        KTRACE          # system call tracing via ktrace(1)
-
-options        SYSVMSG         # System V-like message queues
-options        SYSVSEM         # System V-like semaphores
-options        SYSVSHM         # System V-like memory sharing
-#options       SHMMAXPGS=2048  # 2048 pages is the default
-
-options        LKM             # loadable kernel modules
-
-#options       USERCONF        # userconf(4) support
-#options       PIPE_SOCKETPAIR # smaller, but slower pipe(2)
-#options       SYSCTL_INCLUDE_DESCR    # Include sysctl descriptions in kernel
-
-# Diagnostic/debugging support options
-options        DIAGNOSTIC      # expensive kernel consistency checks
-options        POOL_LOGSIZE=1000
-#options       DEBUG           # expensive debugging checks/support
-#options       KMEMSTATS       # kernel memory statistics (vmstat -m)
-options        DDB             # in-kernel debugger
-#options       DDB_ONPANIC=1   # see also sysctl(8): `ddb.onpanic'
-options        DDB_HISTORY_SIZE=100    # enable history editing in DDB
-#options       KGDB            # remote debugger
-#options       KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
-makeoptions    DEBUG="-g"      # compile full symbol table
-
-# Compatibility options
-#options       COMPAT_NOMID    # NetBSD 0.8, 386BSD, and BSDI
-#options       COMPAT_09       # NetBSD 0.9
-#options       COMPAT_10       # NetBSD 1.0
-#options       COMPAT_11       # NetBSD 1.1
-#options       COMPAT_12       # NetBSD 1.2, 386BSD, and BSDI
-#options       COMPAT_13       # NetBSD 1.3, 386BSD, and BSDI
-#options       COMPAT_14       # NetBSD 1.4
-#options       COMPAT_15       # NetBSD 1.5
-#options       COMPAT_16       # NetBSD 1.6
-#options       COMPAT_20       # NetBSD 2.0
-#options       COMPAT_43       # 4.3BSD, 386BSD, and BSDI
-#options       COMPAT_386BSD_MBRPART # recognize old partition ID
-#options       TCP_COMPAT_42   # 4.2BSD TCP/IP bug compat. Not recommended.
-
-#options       COMPAT_SVR4     # binary compatibility with SVR4
-#options       COMPAT_IBCS2    # binary compatibility with SCO and ISC
-options        COMPAT_LINUX    # binary compatibility with Linux
-#options       COMPAT_FREEBSD  # binary compatibility with FreeBSD
-options                COMPAT_BSDPTY   # /dev/[pt]ty?? ptys.
-
-# File systems
-file-system    FFS             # UFS
-file-system    EXT2FS          # second extended file system (linux)
-file-system    LFS             # log-structured file system
-file-system    MFS             # memory file system
-file-system    NFS             # Network File System client
-#file-system   NTFS            # Windows/NT file system (experimental)
-file-system    CD9660          # ISO 9660 + Rock Ridge file system
-file-system    MSDOSFS         # MS-DOS file system
-file-system    FDESC           # /dev/fd
-file-system    KERNFS          # /kern
-#file-system   NULLFS          # loopback file system
-#file-system   OVERLAY         # overlay file system
-#file-system   PORTAL          # portal filesystem (still experimental)
-file-system    PROCFS          # /proc
-#file-system   UMAPFS          # NULLFS + uid and gid remapping
-#file-system   UNION           # union file system
-#file-system   CODA            # Coda File System; also needs vcoda (below)
-
-# File system options
-#options       QUOTA           # UFS quotas
-#options       FFS_EI          # FFS Endian Independent support
-options        SOFTDEP         # FFS soft updates support.
-options        NFSSERVER       # Network File System server
-#options       FFS_NO_SNAPSHOT # ffs snapshots
-#options       EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
-                               # immutable) behave as system flags.
-
-# Networking options
-options        GATEWAY         # packet forwarding
-options        INET            # IP + ICMP + TCP + UDP
-options        INET6           # IPV6
-options        IPSEC           # IP security
-options        IPSEC_ESP       # IP security (encryption part; define w/IPSEC)
-#options       IPSEC_DEBUG     # debug for IP security
-options        MROUTING        # IP multicast routing
-options        PIM             # Protocol Independent Multicast
-#options       NS              # XNS
-#options       NSIP            # XNS tunneling over IP
-#options       ISO,TPIP        # OSI
-#options       EON             # OSI tunneling over IP
-#options       CCITT,LLC,HDLC  # X.25
-#options       NETATALK        # AppleTalk networking protocols
-#options       PPP_BSDCOMP     # BSD-Compress compression support for PPP
-#options       PPP_DEFLATE     # Deflate compression support for PPP
-#options       PPP_FILTER      # Active filter support for PPP (requires bpf)
-#options       PFIL_HOOKS      # pfil(9) packet filter hooks
-#options       IPFILTER_LOG    # ipmon(8) log support
-#options       TCP_DEBUG       # Record last TCP_NDEBUG packets with SO_DEBUG
-
-options        NMBCLUSTERS=16384 # max mbuf clusters (32M)
-
-
-# These options enable verbose messages for several subsystems.
-# Warning, these may compile large string tables into the kernel!
-#options       EISAVERBOSE     # verbose EISA device autoconfig messages
-options        PCIVERBOSE      # verbose PCI device autoconfig messages
-#options       PCMCIAVERBOSE   # verbose PCMCIA configuration messages
-options        SCSIVERBOSE     # human readable SCSI error messages
-#options       USBVERBOSE      # verbose USB device autoconfig messages
-#options       PNPBIOSVERBOSE  # verbose PnP BIOS messages
-
-#options       NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
-
-#
-# wscons options
-#
-# builtin terminal emulations
-#options       WSEMUL_SUN              # sun terminal emulation
-options        WSEMUL_VT100            # VT100 / VT220 emulation
-# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
-#options       WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
-#options       WS_DEFAULT_FG=WSCOL_WHITE
-#options       WS_DEFAULT_BG=WSCOL_BLACK
-#options       WS_DEFAULT_COLATTR="(0)"
-#options       WS_DEFAULT_MONOATTR="(0)"
-options        WS_KERNEL_FG=WSCOL_GREEN
-#options       WS_KERNEL_BG=WSCOL_BLACK
-#options       WS_KERNEL_COLATTR=""
-#options       WS_KERNEL_MONOATTR=""
-# customization of console border color
-#options       WSDISPLAY_CUSTOM_BORDER # border customization from wsconsctl(8)
-#options       WSDISPLAY_BORDER_COLOR=WSCOL_BLUE       # default color
-# compatibility to other console drivers
-options        WSDISPLAY_COMPAT_PCVT           # emulate some ioctls
-options        WSDISPLAY_COMPAT_SYSCONS        # emulate some ioctls
-options        WSDISPLAY_COMPAT_USL            # VT handling
-options        WSDISPLAY_COMPAT_RAWKBD         # can get raw scancodes
-# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
-#options       PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
-# allocate a number of virtual screens at autoconfiguration time
-#options       WSDISPLAY_DEFAULTSCREENS=4
-# use a large software cursor that doesn't blink
-options        PCDISPLAY_SOFTCURSOR
-
-# Kernel root file system and dump configuration.
-config         netbsd  root on ? type ?
-#config                netbsd  root on sd0a type ffs
-#config                netbsd  root on ? type nfs
-
-#
-# Device configuration
-#
-
-mainbus0 at root
-cpu0   at mainbus0
-#apm0  at mainbus0                     # Advanced power management
-
-# Tuning for power management, see apm(4) for more details.
-#options       APM_NO_IDLE             # Don't call BIOS CPU idle function
-#options       APM_V10_ONLY            # Use only the APM 1.0 calls
-#options       APM_NO_POWEROFF         # Don't power off on halt(8)
-#options       APM_POWER_PRINT         # Don't print stats on the console
-#options       APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
-
-
-# Basic Bus Support
-
-# PCI bus support
-pci*   at mainbus? bus ?
-pci*   at pchb? bus ?
-pci*   at ppb? bus ?
-
-# Configure PCI using BIOS information
-#options       PCIBIOS                 # PCI BIOS support
-#options       PCIBIOSVERBOSE          # PCI BIOS verbose info
-#options       PCIBIOS_INTR_FIXUP      # fixup PCI interrupt routing
-#options       PCIINTR_DEBUG           # super-verbose PCI interrupt fixup
-#options       PCIBIOS_BUS_FIXUP       # fixup PCI bus numbering
-
-# PCI bridges
-pchb*  at pci? dev ? function ?        # PCI-Host bridges
-#pceb* at pci? dev ? function ?        # PCI-EISA bridges
-pcib*  at pci? dev ? function ?        # PCI-ISA bridges
-ppb*   at pci? dev ? function ?        # PCI-PCI bridges
-# XXX 'puc's aren't really bridges, but there's no better place for them here
-#puc*  at pci? dev ? function ?        # PCI "universal" comm. cards
-
-# EISA bus support
-#eisa* at mainbus?
-#eisa* at pceb?
-
-# ISA bus support
-isa*   at mainbus?
-#isa*  at pceb?
-isa*   at pcib?
-
-# PCMCIA bus support
-#pcmcia*       at pcic? controller ? socket ?
-#pcmcia*       at tcic? controller ? socket ?
-
-# ISA PCMCIA controllers
-#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
-#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
-#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
-
-# PCI PCMCIA controllers
-#pcic0 at pci? dev? function ?
-
-# ISA Plug-and-Play bus support
-isapnp0        at isa?
-
-# ISA Plug-and-Play PCMCIA controllers
-#pcic* at isapnp?
-
-# CardBus bus support
-#cbb*          at pci? dev ? function ?
-#cardslot*     at cbb?
-
-#cardbus*      at cardslot?
-#pcmcia*       at cardslot?
-
-# Coprocessor Support
-
-# Math Coprocessor support
-npx0   at isa? port 0xf0 irq 13        # x86 math coprocessor
-
-
-# Console Devices
-
-# ISA console.  You can only configure one of these!
-#pc0   at isa? port 0x60 irq 1         # pccons generic PC console driver
-#vt0   at isa? port 0x60 irq 1         # PCVT console driver
-
-# Keyboard layout configuration for pccons
-#options       FRENCH_KBD
-#options       FINNISH_KBD
-#options       GERMAN_KBD
-#options       NORWEGIAN_KBD
-
-# wscons
-pckbc0         at isa?                 # pc keyboard controller
-pckbd*         at pckbc?               # PC keyboard
-pms*           at pckbc?               # PS/2 mouse for wsmouse
-#vga0          at isa?
-vga*           at pci? dev ? function ?
-pcdisplay0     at isa?                 # CGA, MDA, EGA, HGA
-wsdisplay*     at vga? console ?
-wsdisplay*     at pcdisplay? console ?
-wskbd*                 at pckbd? console ?
-wsmouse*       at pms? mux 0



Home | Main Index | Thread Index | Old Index