Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/dev/qbus Waked up from the dead



details:   https://anonhg.NetBSD.org/src/rev/2c9ba9f6687e
branches:  trunk
changeset: 482082:2c9ba9f6687e
user:      ragge <ragge%NetBSD.org@localhost>
date:      Sun Feb 13 13:01:14 2000 +0000

description:
Waked up from the dead

diffstat:

 sys/dev/qbus/ubareg.h |  241 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 241 insertions(+), 0 deletions(-)

diffs (245 lines):

diff -r 5f1807fca87f -r 2c9ba9f6687e sys/dev/qbus/ubareg.h
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/dev/qbus/ubareg.h     Sun Feb 13 13:01:14 2000 +0000
@@ -0,0 +1,241 @@
+/*     $NetBSD: ubareg.h,v 1.15 2000/02/13 13:01:14 ragge Exp $ */
+
+/*-
+ * Copyright (c) 1982, 1986 The Regents of the University of California.
+ * All rights reserved.
+ * (c) UNIX System Laboratories, Inc.
+ * All or some portions of this file are derived from material licensed
+ * to the University of California by American Telephone and Telegraph
+ * Co. or Unix System Laboratories, Inc. and are reproduced herein with
+ * the permission of UNIX System Laboratories, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *     This product includes software developed by the University of
+ *     California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *     @(#)ubareg.h    7.8 (Berkeley) 5/9/91
+ */
+
+/*
+ * VAX UNIBUS adapter registers
+ */
+
+/*
+ * "UNIBUS" adaptor types.
+ * This code is used for both UNIBUSes and Q-buses
+ * with different types of adaptors.
+ * Definition of a type includes support code for that type.
+ */
+
+#if VAX780 || VAX8600
+#define DW780  1               /* has adaptor regs, sr: 780/785/8600 */
+#else
+#undef DW780
+#endif
+
+
+#if VAX750
+#define DW750  2               /* has adaptor regs, no sr: 750, 730 */
+#endif
+
+#if VAX730
+#define DW730  3               /* has adaptor regs, no sr: 750, 730 */
+#endif
+
+#if VAX630 || VAX650
+#define QBA    4               /* 22-bit Q-bus, no adaptor regs: uVAX II */
+#endif
+
+/*
+ * Size of unibus memory address space in pages
+ * (also number of map registers).
+ * QBAPAGES should be 8192, but we don't need nearly that much
+ * address space, and the return from the allocation routine
+ * can accommodate at most 2047 (ubavar.h: UBA_MAXMR);
+ * QBAPAGES must be at least UBAPAGES. Choose pragmatically.
+ * 
+ * Is there ever any need to have QBAPAGES != UBAPAGES???
+ * Wont work now anyway, QBAPAGES _must_ be .eq. UBAPAGES.
+ */
+#define UBAPAGES       496
+#define NUBMREG                496
+#define        QBAPAGES        1024
+#define UBAIOADDR      0760000         /* start of I/O page */
+#define UBAIOPAGES     16
+#define        UBAIOSIZE       8192            /* 8K I/O space */
+
+#ifndef _LOCORE
+#if 0
+/*
+ * DW780/DW750 hardware registers
+ */
+struct uba_regs {
+       int     uba_cnfgr;              /* configuration register */
+       int     uba_cr;                 /* control register */
+       int     uba_sr;                 /* status register */
+       int     uba_dcr;                /* diagnostic control register */
+       int     uba_fmer;               /* failed map entry register */
+       int     uba_fubar;              /* failed UNIBUS address register */
+       int     pad1[2];
+       int     uba_brsvr[4];
+       int     uba_brrvr[4];           /* receive vector registers */
+       int     uba_dpr[16];            /* buffered data path register */
+       int     pad2[480];
+       struct pte uba_map[UBAPAGES];   /* unibus map register */
+       int     pad3[UBAIOPAGES];       /* no maps for device address space */
+};
+#endif
+#endif
+
+#ifdef DW780
+/* uba_cnfgr */
+#define UBACNFGR_UBINIT 0x00040000     /* unibus init asserted */
+#define UBACNFGR_UBPDN 0x00020000      /* unibus power down */
+#define UBACNFGR_UBIC  0x00010000      /* unibus init complete */
+
+#define UBACNFGR_BITS \
+"\40\40PARFLT\37WSQFLT\36URDFLT\35ISQFLT\34MXTFLT\33XMTFLT\30ADPDN\27ADPUP\23UBINIT\22UBPDN\21UBIC"
+
+/* uba_cr */
+#define UBACR_MRD16    0x40000000      /* map reg disable bit 4 */
+#define UBACR_MRD8     0x20000000      /* map reg disable bit 3 */
+#define UBACR_MRD4     0x10000000      /* map reg disable bit 2 */
+#define UBACR_MRD2     0x08000000      /* map reg disable bit 1 */
+#define UBACR_MRD1     0x04000000      /* map reg disable bit 0 */
+#define UBACR_IFS      0x00000040      /* interrupt field switch */
+#define UBACR_BRIE     0x00000020      /* BR interrupt enable */
+#define UBACR_USEFIE   0x00000010      /* UNIBUS to SBI error field IE */
+#define UBACR_SUEFIE   0x00000008      /* SBI to UNIBUS error field IE */
+#define UBACR_CNFIE    0x00000004      /* configuration IE */
+#define UBACR_UPF      0x00000002      /* UNIBUS power fail */
+#define UBACR_ADINIT   0x00000001      /* adapter init */
+
+/* uba_sr */
+#define UBASR_BR7FULL  0x08000000      /* BR7 receive vector reg full */
+#define UBASR_BR6FULL  0x04000000      /* BR6 receive vector reg full */
+#define UBASR_BR5FULL  0x02000000      /* BR5 receive vector reg full */
+#define UBASR_BR4FULL  0x01000000      /* BR4 receive vector reg full */
+#define UBASR_RDTO     0x00000400      /* UNIBUS to SBI read data timeout */
+#define UBASR_RDS      0x00000200      /* read data substitute */
+#define UBASR_CRD      0x00000100      /* corrected read data */
+#define UBASR_CXTER    0x00000080      /* command transmit error */
+#define UBASR_CXTMO    0x00000040      /* command transmit timeout */
+#define UBASR_DPPE     0x00000020      /* data path parity error */
+#define UBASR_IVMR     0x00000010      /* invalid map register */
+#define UBASR_MRPF     0x00000008      /* map register parity failure */
+#define UBASR_LEB      0x00000004      /* lost error */
+#define UBASR_UBSTO    0x00000002      /* UNIBUS select timeout */
+#define UBASR_UBSSYNTO 0x00000001      /* UNIBUS slave sync timeout */
+
+#define UBASR_BITS \
+"\20\13RDTO\12RDS\11CRD\10CXTER\7CXTMO\6DPPE\5IVMR\4MRPF\3LEB\2UBSTO\1UBSSYNTO"
+
+/* uba_brrvr[] */
+#define UBABRRVR_AIRI  0x80000000      /* adapter interrupt request */
+#define UBABRRVR_DIV   0x0000ffff      /* device interrupt vector field */
+#endif
+ 
+/* uba_dpr */
+#ifdef DW780
+#define UBADPR_BNE     0x80000000      /* buffer not empty - purge */
+#define UBADPR_BTE     0x40000000      /* buffer transfer error */
+#define UBADPR_DPF     0x20000000      /* DP function (RO) */
+#define UBADPR_BS      0x007f0000      /* buffer state field */
+#define UBADPR_BUBA    0x0000ffff      /* buffered UNIBUS address */
+#endif
+#ifdef DW750
+#define UBADPR_ERROR   0x80000000      /* error occurred */
+#define UBADPR_NXM     0x40000000      /* nxm from memory */
+#define UBADPR_UCE     0x20000000      /* uncorrectable error */
+#define UBADPR_PURGE   0x00000001      /* purge bdp */
+#endif
+
+/* uba_mr[] */
+#define UBAMR_MRV      0x80000000      /* map register valid */
+#define UBAMR_BO       0x02000000      /* byte offset bit */
+#define UBAMR_DPDB     0x01e00000      /* data path designator field */
+#define UBAMR_SBIPFN   0x001fffff      /* SBI page address field */
+
+#define UBAMR_DPSHIFT  21              /* shift to data path designator */
+
+/*
+ * Number of unibus buffered data paths and possible uba's per cpu type.
+ */
+#define NBDP8600       15
+#define NBDP780                15
+#define NBDPBUA                5
+#define NBDP750                3
+#define NBDP730                0
+#define MAXNBDP                15
+
+/*
+ * Symbolic BUS addresses for UBAs.
+ */
+
+#if VAX630 || VAX650
+#define QBAMAP 0x20088000
+#define QMEM   0x30000000
+#define QIOPAGE        0x20000000
+/*
+ * Q-bus control registers
+ */
+#define QIPCR          0x1f40          /* from start of iopage */
+/* bits in QIPCR */
+#define Q_DBIRQ                0x0001          /* doorbell interrupt request */
+#define Q_LMEAE                0x0020          /* local mem external access enable */
+#define Q_DBIIE                0x0040          /* doorbell interrupt enable */
+#define Q_AUXHLT       0x0100          /* auxiliary processor halt */
+#define Q_DMAQPE       0x8000          /* Q22 bus address space parity error */
+#endif
+
+#if VAX730
+#define UMEM730                0xfc0000
+#endif
+
+#if VAX750
+#define UMEM750(i)     (0xfc0000-(i)*0x40000)
+#endif
+
+#if VAX780
+#define UMEM780(i)     (0x20100000+(i)*0x40000)
+#endif
+
+#if VAX8200            /* BEWARE, argument is node, not ubanum */
+#define UMEM8200(i)    (0x20400000+(i)*0x40000)
+#endif
+
+#if VAX8600 || VAX780
+#define UMEMA8600(i)   (0x20100000+(i)*0x40000)
+#define UMEMB8600(i)   (0x22100000+(i)*0x40000)
+#endif
+
+/*
+ * Macro to offset a UNIBUS device address, often expressed as
+ * something like 0172520, by forcing it into the last 8K
+ * of UNIBUS memory space.
+ */
+#define ubdevreg(addr) ((addr) & 017777)



Home | Main Index | Thread Index | Old Index