Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/i386/conf sync with GENERIC 1.501. comment out dev...
details: https://anonhg.NetBSD.org/src/rev/26835ffd7418
branches: trunk
changeset: 533839:26835ffd7418
user: itojun <itojun%NetBSD.org@localhost>
date: Wed Jul 10 08:41:28 2002 +0000
description:
sync with GENERIC 1.501. comment out devices that are not present.
(you can strip it down even more by commenting out unneeded filesystems)
diffstat:
sys/arch/i386/conf/LAMB | 66 +++++++++++++++++++++++++++---------------------
1 files changed, 37 insertions(+), 29 deletions(-)
diffs (142 lines):
diff -r 864abe0efc5c -r 26835ffd7418 sys/arch/i386/conf/LAMB
--- a/sys/arch/i386/conf/LAMB Wed Jul 10 08:37:40 2002 +0000
+++ b/sys/arch/i386/conf/LAMB Wed Jul 10 08:41:28 2002 +0000
@@ -1,13 +1,13 @@
-# $NetBSD: LAMB,v 1.24 2002/06/17 05:14:13 lukem Exp $
+# $NetBSD: LAMB,v 1.25 2002/07/10 08:41:28 itojun Exp $
#
# LAMB - a complete kernel for wildlab LAMB, http://www.wildlab.com/
#
-include "arch/i386/conf/std.i386"
+include "arch/i386/conf/std.i386"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
-#ident "GENERIC-$Revision: 1.24 $"
+#ident "GENERIC-Revision: 1.501"
maxusers 32 # estimated number of users
@@ -54,6 +54,7 @@
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
+options SYSTRACE # system call vetting via systrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
@@ -67,7 +68,7 @@
options LKM # loadable kernel modules
#options USERCONF # userconf(4) support
-#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
+#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options TIMER_FREQ=1189200 # LAMB uses nonstandard timer freq
@@ -179,6 +180,12 @@
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
+# work around a hardware bug that loaded fonts don't work; found on ATI cards
+#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
+# the following enables some functions to get mouse console support.
+# if you want a really secure system, it may be better not to enable them,
+# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
+#options WSDISPLAY_CHARFUNCS # mouse console support
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
@@ -265,15 +272,16 @@
# wscons
-pckbc0 at isa? # pc keyboard controller
-pckbd* at pckbc? # PC keyboard
-pms* at pckbc? # PS/2 mouse for wsmouse
-vga0 at isa?
-pcdisplay0 at isa? # CGA, MDA, EGA, HGA
-wsdisplay* at vga? console ?
-wsdisplay* at pcdisplay? console ?
-wskbd* at pckbd? console ?
-wsmouse* at pms? mux 0
+#pckbc0 at isa? # pc keyboard controller
+#pckbd* at pckbc? # PC keyboard
+#pms* at pckbc? # PS/2 mouse for wsmouse
+#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
+#vga0 at isa?
+#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
+#wsdisplay* at vga? console ?
+#wsdisplay* at pcdisplay? console ?
+#wskbd* at pckbd? console ?
+#wsmouse* at pms? mux 0
# no buzzer installed
#pcppi0 at isa?
@@ -315,15 +323,6 @@
# 0x0000 means "use whatever the drive claims to support".
wd* at wdc? channel ? drive ? flags 0x0000
-# ATAPI bus support
-atapibus* at wdc? channel ?
-
-# ATAPI devices
-# flags have the same meaning as for IDE drives.
-cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
-sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
-uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
-
# Network Interfaces
@@ -341,8 +340,16 @@
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
-#pseudo-device raid 4 # RAIDframe disk driver
-#options RAID_AUTOCONFIG # auto-configuration of RAID components
+pseudo-device raid 8 # RAIDframe disk driver
+options RAID_AUTOCONFIG # auto-configuration of RAID components
+#Options to enable various other RAIDframe RAID types.
+#options RF_INCLUDE_EVENODD=1
+#options RF_INCLUDE_RAID5_RS=1
+#options RF_INCLUDE_PARITYLOGGING=1
+#options RF_INCLUDE_CHAINDECLUSTER=1
+#options RF_INCLUDE_INTERDECLUSTER=1
+#options RF_INCLUDE_PARITY_DECLUSTERING=1
+#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
@@ -351,8 +358,10 @@
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
+pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
+#pseudo-device irframetty # IrDA frame line discipline
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
@@ -363,8 +372,8 @@
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
-pseudo-device tb 1 # tablet line discipline
-pseudo-device sequencer 1 # MIDI sequencer
+#pseudo-device tb 1 # tablet line discipline
+#pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
@@ -374,6 +383,5 @@
pseudo-device vcoda 4 # coda minicache <-> venus comm.
# wscons pseudo-devices
-pseudo-device wsmux # mouse & keyboard multiplexor
-pseudo-device wsfont
-
+#pseudo-device wsmux # mouse & keyboard multiplexor
+#pseudo-device wsfont
Home |
Main Index |
Thread Index |
Old Index