Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/powerpc/include Add some IBM 4xx CPU PVR values; so...
details: https://anonhg.NetBSD.org/src/rev/408702dc876c
branches: trunk
changeset: 535177:408702dc876c
user: simonb <simonb%NetBSD.org@localhost>
date: Sun Aug 11 13:33:00 2002 +0000
description:
Add some IBM 4xx CPU PVR values; sort PVRs numerically.
White space nits.
diffstat:
sys/arch/powerpc/include/spr.h | 143 +++++++++++++++++++++-------------------
1 files changed, 76 insertions(+), 67 deletions(-)
diffs (180 lines):
diff -r cb4581d4dcb0 -r 408702dc876c sys/arch/powerpc/include/spr.h
--- a/sys/arch/powerpc/include/spr.h Sun Aug 11 13:32:20 2002 +0000
+++ b/sys/arch/powerpc/include/spr.h Sun Aug 11 13:33:00 2002 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: spr.h,v 1.23 2002/08/10 21:38:06 matt Exp $ */
+/* $NetBSD: spr.h,v 1.24 2002/08/11 13:33:00 simonb Exp $ */
#ifndef _POWERPC_SPR_H_
#define _POWERPC_SPR_H_
@@ -43,7 +43,7 @@
#define SPR_SRR0 0x01a /* 468 Save/Restore Register 0 */
#define SPR_SRR1 0x01b /* 468 Save/Restore Register 1 */
#define SPR_USPRG0 0x100 /* 4.. User SPR General 0 */
-#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
+#define SPR_VRSAVE 0x100 /* .6. AltiVec VRSAVE */
#define SPR_SPRG0 0x110 /* 468 SPR General 0 */
#define SPR_SPRG1 0x111 /* 468 SPR General 1 */
#define SPR_SPRG2 0x112 /* 468 SPR General 2 */
@@ -57,26 +57,35 @@
#define SPR_TBL 0x11c /* 468 Time Base Lower */
#define SPR_TBU 0x11d /* 468 Time Base Upper */
#define SPR_PVR 0x11f /* 468 Processor Version Register */
-#define MPC601 0x0001
-#define MPC603 0x0003
-#define MPC604 0x0004
-#define MPC602 0x0005
-#define MPC603e 0x0006
-#define MPC603ev 0x0007
-#define MPC750 0x0008
-#define MPC604ev 0x0009
-#define MPC7400 0x000c
-#define MPC620 0x0014
-#define IBMPOWER3 0x0041
-#define MPC860 0x0050
-#define MPC8240 0x0081
-#define IBM750FX 0x7000
-#define MPC7450 0x8000
-#define MPC7455 0x8001
-#define MPC7410 0x800c
-#define MPC8245 0x8081
-#define IBM405GP 0x4011
-#define IBM405L 0x4161
+#define MPC601 0x0001
+#define MPC603 0x0003
+#define MPC604 0x0004
+#define MPC602 0x0005
+#define MPC603e 0x0006
+#define MPC603ev 0x0007
+#define MPC750 0x0008
+#define MPC604ev 0x0009
+#define MPC7400 0x000c
+#define MPC620 0x0014
+#define IBM403 0x0020
+#define IBM401A1 0x0021
+#define IBM401B2 0x0022
+#define IBM401C2 0x0023
+#define IBM401D2 0x0024
+#define IBM401E2 0x0025
+#define IBM401F2 0x0026
+#define IBM401G2 0x0027
+#define IBMPOWER3 0x0041
+#define MPC860 0x0050
+#define MPC8240 0x0081
+#define IBM405GP 0x4011
+#define IBM405L 0x4161
+#define IBM750FX 0x7000
+#define MPC7450 0x8000
+#define MPC7455 0x8001
+#define MPC7410 0x800c
+#define MPC8245 0x8081
+
#define SPR_IBAT0U 0x210 /* .68 Instruction BAT Reg 0 Upper */
#define SPR_IBAT0L 0x211 /* .68 Instruction BAT Reg 0 Lower */
#define SPR_IBAT1U 0x212 /* .68 Instruction BAT Reg 1 Upper */
@@ -261,60 +270,60 @@
#define SPR_IAC2 0x3f5 /* 4.. Instruction Address Compare 2 */
#define SPR_DABR 0x3f5 /* .6. Data Address Breakpoint Register */
#define SPR_DAC1 0x3f6 /* 4.. Data Address Compare 1 */
-#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
-#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
-#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
-#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
-#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/
-#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
-#define MSSCR0_MBO 0x00400000 /* 9: must be one */
-#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
-#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
-#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */
+#define SPR_MSSCR0 0x3f6 /* .6. Memory SubSystem Control Register */
+#define MSSCR0_SHDEN 0x80000000 /* 0: Shared-state enable */
+#define MSSCR0_SHDPEN3 0x40000000 /* 1: ~SHD[01] signal enable in MEI mode */
+#define MSSCR0_L1INTVEN 0x38000000 /* 2-4: L1 data cache ~HIT intervention enable */
+#define MSSCR0_L2INTVEN 0x07000000 /* 5-7: L2 data cache ~HIT intervention enable*/
+#define MSSCR0_DL1HWF 0x00800000 /* 8: L1 data cache hardware flush */
+#define MSSCR0_MBO 0x00400000 /* 9: must be one */
+#define MSSCR0_EMODE 0x00200000 /* 10: MPX bus mode (read-only) */
+#define MSSCR0_ABD 0x00100000 /* 11: address bus driven (read-only) */
+#define MSSCR0_MBZ 0x000fffff /* 12-31: must be zero */
#define SPR_DAC2 0x3f7 /* 4.. Data Address Compare 2 */
#define SPR_L2PM 0x3f8 /* .6. L2 Private Memory Control Register */
#define SPR_L2CR 0x3f9 /* .6. L2 Control Register */
-#define L2CR_L2E 0x80000000 /* 0: L2 enable */
-#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
-#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
-#define L2SIZ_2M 0x00000000
-#define L2SIZ_256K 0x10000000
-#define L2SIZ_512K 0x20000000
-#define L2SIZ_1M 0x30000000
-#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
-#define L2CLK_DIS 0x00000000 /* disable L2 clock */
-#define L2CLK_10 0x02000000 /* core clock / 1 */
-#define L2CLK_15 0x04000000 /* / 1.5 */
-#define L2CLK_20 0x08000000 /* / 2 */
-#define L2CLK_25 0x0a000000 /* / 2.5 */
-#define L2CLK_30 0x0c000000 /* / 3 */
-#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
-#define L2RAM_FLOWTHRU_BURST 0x00000000
-#define L2RAM_PIPELINE_BURST 0x01000000
-#define L2RAM_PIPELINE_LATE 0x01800000
-#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
+#define L2CR_L2E 0x80000000 /* 0: L2 enable */
+#define L2CR_L2PE 0x40000000 /* 1: L2 data parity enable */
+#define L2CR_L2SIZ 0x30000000 /* 2-3: L2 size */
+#define L2SIZ_2M 0x00000000
+#define L2SIZ_256K 0x10000000
+#define L2SIZ_512K 0x20000000
+#define L2SIZ_1M 0x30000000
+#define L2CR_L2CLK 0x0e000000 /* 4-6: L2 clock ratio */
+#define L2CLK_DIS 0x00000000 /* disable L2 clock */
+#define L2CLK_10 0x02000000 /* core clock / 1 */
+#define L2CLK_15 0x04000000 /* / 1.5 */
+#define L2CLK_20 0x08000000 /* / 2 */
+#define L2CLK_25 0x0a000000 /* / 2.5 */
+#define L2CLK_30 0x0c000000 /* / 3 */
+#define L2CR_L2RAM 0x01800000 /* 7-8: L2 RAM type */
+#define L2RAM_FLOWTHRU_BURST 0x00000000
+#define L2RAM_PIPELINE_BURST 0x01000000
+#define L2RAM_PIPELINE_LATE 0x01800000
+#define L2CR_L2DO 0x00400000 /* 9: L2 data-only.
Setting this bit disables instruction
caching. */
-#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
-#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
+#define L2CR_L2I 0x00200000 /* 10: L2 global invalidate. */
+#define L2CR_L2CTL 0x00100000 /* 11: L2 RAM control (ZZ enable).
Enables automatic operation of the
L2ZZ (low-power mode) signal. */
-#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
-#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
-#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
-#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
-#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
-#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
-#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
-#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
-#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
-#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
-#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
-#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
+#define L2CR_L2WT 0x00080000 /* 12: L2 write-through. */
+#define L2CR_L2TS 0x00040000 /* 13: L2 test support. */
+#define L2CR_L2OH 0x00030000 /* 14-15: L2 output hold. */
+#define L2CR_L2SL 0x00008000 /* 16: L2 DLL slow. */
+#define L2CR_L2DF 0x00004000 /* 17: L2 differential clock. */
+#define L2CR_L2BYP 0x00002000 /* 18: L2 DLL bypass. */
+#define L2CR_L2FA 0x00001000 /* 19: L2 flush assist (for software flush). */
+#define L2CR_L2HWF 0x00000800 /* 20: L2 hardware flush. */
+#define L2CR_L2IO 0x00000400 /* 21: L2 instruction-only. */
+#define L2CR_L2CLKSTP 0x00000200 /* 22: L2 clock stop. */
+#define L2CR_L2DRO 0x00000100 /* 23: L2DLL rollover checkstop enable. */
+#define L2CR_L2IP 0x00000001 /* 31: L2 global invalidate in */
/* progress (read only). */
#define SPR_L3CR 0x3fa /* .6. L3 Control Register */
-#define L3CR_L3E 0x80000000 /* 0: L3 enable */
-#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
+#define L3CR_L3E 0x80000000 /* 0: L3 enable */
+#define L3CR_L3SIZ 0x10000000 /* 3: L3 size (0=1MB, 1=2MB) */
#define SPR_DCCR 0x3fa /* 4.. Data Cache Cachability Register */
#define SPR_ICCR 0x3fb /* 4.. Instruction Cache Cachability Register */
#define SPR_THRM1 0x3fc /* .6. Thermal Management Register */
Home |
Main Index |
Thread Index |
Old Index