[src/trunk]: src/sys/arch/x68k/conf Add ScanLogic SL811HS/T USB Host Controll...

[isaki <isaki%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/15d2ad6a4f66
branches:  trunk
changeset: 535171:15d2ad6a4f66
user:      isaki <isaki%NetBSD.org@localhost>
date:      Sun Aug 11 13:19:35 2002 +0000

description:
Add ScanLogic SL811HS/T USB Host Controller and USB stuff.

diffstat:

 sys/arch/x68k/conf/ALL |  116 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 112 insertions(+), 4 deletions(-)

diffs (144 lines):

diff -r 3bff60788e25 -r 15d2ad6a4f66 sys/arch/x68k/conf/ALL
--- a/sys/arch/x68k/conf/ALL    Sun Aug 11 13:18:57 2002 +0000
+++ b/sys/arch/x68k/conf/ALL    Sun Aug 11 13:19:35 2002 +0000
@@ -1,4 +1,4 @@
-#      $NetBSD: ALL,v 1.52 2002/06/17 05:14:28 lukem Exp $
+#      $NetBSD: ALL,v 1.53 2002/08/11 13:19:35 isaki Exp $
 
 #
 #      ALL -- everything that currently exist including experimental
@@ -8,7 +8,7 @@
 
 options        INCLUDE_CONFIG_FILE     # embed config file in kernel binary
 
-#ident                 "ALL-$Revision: 1.52 $"
+#ident                 "ALL-$Revision: 1.53 $"
 
 maxusers       32
 
@@ -111,8 +111,10 @@
 ## on the system console
 options        DEBUG
 
-## Make SCSI error messages more verbose when explaining their meanings.
-options        SCSIVERBOSE
+## These options enable verbose messages for several subsystems.
+## Warning, these may compile large string tables into the kernel!
+options        SCSIVERBOSE     # human readable SCSI error messages
+options        USBVERBOSE      # verbose USB device autoconfig messages
 
 ## `INSECURE' turns off the kernel security level (securelevel = 0 always).
 ## This allows writing to /dev/mem, loading kernel modules while multi-user,
@@ -264,6 +266,112 @@
 ne*    at neptune? addr 0x300                  # NE2000 or clone
 
 
+## MII/PHY support for USB ethernet
+acphy* at mii? phy ?
+
+## USB Controller and Devices; Experimental
+
+# Nereid USB controllers
+slhci0 at intio0 addr 0xece380 intr 251
+slhci1 at intio0 addr 0xeceb80 intr 250
+#options       SLHCI_DEBUG
+
+# USB bus support
+usb*   at slhci?
+
+# USB Hubs
+uhub*  at usb?
+uhub*  at uhub? port ? configuration ? interface ?
+
+# USB HID device
+uhidev*        at uhub? port ? configuration ? interface ?
+
+# USB Mice; not supported wscons yet
+#ums*  at uhidev? reportid ?
+#wsmouse* at ums? mux 0
+
+# USB Keyboards; not supported wscons yet
+#ukbd* at uhidev? reportid ?
+#wskbd*        at ukbd? console ? mux 1
+
+# USB Generic HID devices
+uhid*  at uhidev? reportid ?
+
+# USB Printer
+ulpt*  at uhub? port ? configuration ? interface ?
+
+# USB Modem
+umodem*        at uhub? port ? configuration ?
+ucom*  at umodem?
+
+# USB Mass Storage; wd not supported
+#umass*        at uhub? port ? configuration ? interface ?
+#atapibus* at umass? channel ?
+#scsibus* at umass? channel ?
+#wd* at umass?
+
+# USB audio
+uaudio*        at uhub? port ? configuration ?
+
+# USB MIDI
+umidi* at uhub? port ? configuration ?
+
+# USB IrDA
+# USB-IrDA bridge spec
+uirda* at uhub? port ? configuration ? interface ?
+irframe* at uirda?
+
+# SigmaTel STIr4200 USB/IrDA Bridge
+ustir* at uhub? port ?
+irframe* at ustir?
+
+# USB Ethernet adapters
+aue*   at uhub? port ?         # ADMtek AN986 Pegasus based adapters
+cue*   at uhub? port ?         # CATC USB-EL1201A based adapters
+kue*   at uhub? port ?         # Kawasaki LSI KL5KUSB101B based adapters
+url*   at uhub? port ?         # Realtek RTL8150L based adapters
+
+# Prolific PL2301/PL2302 host-to-host adapter
+upl*   at uhub? port ?
+
+# Serial adapters
+uftdi* at uhub? port ?         # FTDI FT8U100AX serial adapter
+ucom*  at uftdi? portno ?
+
+umct*  at uhub? port ?         # MCT USB-RS232 serial adapter
+ucom*  at umct? portno ?
+
+uplcom*        at uhub? port ?         # I/O DATA USB-RSAQ2 serial adapter
+ucom*  at uplcom? portno ?
+
+uvscom*        at uhub? port ?         # SUNTAC Slipper U VS-10U serial adapter
+ucom*  at uvscom? portno ?
+
+# Diamond Multimedia Rio 500
+urio*  at uhub? port ?
+
+# USB Handspring Visor
+uvisor*        at uhub? port ?
+ucom*  at uvisor?
+
+# USB scanners
+uscanner* at uhub? port ?
+
+# USB scanners that use SCSI emulation, e.g., HP5300
+usscanner* at uhub? port ?
+scsibus* at usscanner? channel ?
+
+# Y@P firmware loader
+uyap* at uhub? port ?
+
+# D-Link DSB-R100 USB radio
+udsbr* at uhub? port ?
+radio* at udsbr?
+
+# USB Generic driver
+ugen*  at uhub? port ?
+
+
 #### Pseudo devices
 
 ## A disk-like interface to files.  Can be used to create floppy, CD,