Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/share/man/man4 Grammar police.



details:   https://anonhg.NetBSD.org/src/rev/0c91d4c64bc1
branches:  trunk
changeset: 507855:0c91d4c64bc1
user:      nathanw <nathanw%NetBSD.org@localhost>
date:      Sun Apr 01 20:27:50 2001 +0000

description:
Grammar police.

diffstat:

 share/man/man4/wss.4 |  19 +++++++++----------
 1 files changed, 9 insertions(+), 10 deletions(-)

diffs (41 lines):

diff -r fb92a552d23c -r 0c91d4c64bc1 share/man/man4/wss.4
--- a/share/man/man4/wss.4      Sun Apr 01 20:19:20 2001 +0000
+++ b/share/man/man4/wss.4      Sun Apr 01 20:27:50 2001 +0000
@@ -1,4 +1,4 @@
-.\"   $NetBSD: wss.4,v 1.15 1999/12/15 22:07:35 abs Exp $
+.\"   $NetBSD: wss.4,v 1.16 2001/04/01 20:27:50 nathanw Exp $
 .\"
 .\" Copyright (c) 1995 Michael Long.
 .\" All rights reserved.
@@ -41,8 +41,8 @@
 .Sh DESCRIPTION
 The
 .Nm
-driver supports Microsoft's Windows Sound System, MAD16 chip based
-hardware and their clones.
+driver supports Microsoft's Windows Sound System, the MAD16 chip based
+hardware, and their clones.
 .Pp
 The base I/O port is set by a jumper on the board; valid choices are
 0x530, 0x604, 0xE80, or 0xF40.
@@ -50,14 +50,13 @@
 The IRQ may be set to 7, 9, 10, or 11, and
 the DMA channel may be set to 0, 1, or 3.
 .Pp
-The configuration file must have bit 1 set in
+The device 
 .Cm flags
-to enable the MAD16 support.  This is to avoid potential
-conflicts with other devices when probing the MAD16 because it requires
-use of extra I/O ports not in the base port range.
-Chips needing this flag are, e.g., OPTi 82C928, 82C929, 82C831,
-and OAK OTI-601D.
-Bit 2 in 
+must have bit 0 (value 1) set to enable the MAD16 support.  This is to
+avoid potential conflicts with other devices when probing the MAD16
+because it requires use of extra I/O ports not in the base port range.
+Chips needing this flag include the OPTi 82C928, 82C929, 82C831, and
+the OAK OTI-601D.  Setting bit 1 (value 2) in
 .Cm flags
 disables the joystick port on MAD16 hardware.
 .Sh SEE ALSO



Home | Main Index | Thread Index | Old Index