Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/netbsd-1-5]: src/distrib/notes/macppc Pull up revision 1.9 (requested by...



details:   https://anonhg.NetBSD.org/src/rev/03a07ef00624
branches:  netbsd-1-5
changeset: 491330:03a07ef00624
user:      he <he%NetBSD.org@localhost>
date:      Mon Apr 23 22:22:07 2001 +0000

description:
Pull up revision 1.9 (requested by mbw):
  Update to the macppc install documentation; OpenFirmware parts
  reorganized and other changes.

diffstat:

 distrib/notes/macppc/install |  21 ++++++++++++++++-----
 1 files changed, 16 insertions(+), 5 deletions(-)

diffs (60 lines):

diff -r 00ca6a8fc3b7 -r 03a07ef00624 distrib/notes/macppc/install
--- a/distrib/notes/macppc/install      Mon Apr 23 22:21:54 2001 +0000
+++ b/distrib/notes/macppc/install      Mon Apr 23 22:22:07 2001 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: install,v 1.2.10.3 2000/11/05 01:23:23 tv Exp $
+.\"    $NetBSD: install,v 1.2.10.4 2001/04/23 22:22:07 he Exp $
 .
 .Ss2 Booting the installer
 .
@@ -72,7 +72,8 @@
 .(bullet
 .Em Floppy disk
 .br
-(Open Firmware 1.x, Open Firmware 2.0.x)
+(Open Firmware 1.0.5, Open Firmware 1.1.22, Open Firmware 2.0.x, Open 
+Firmware 2.4)
 .Pp
 The floppy disk has a
 .Sq partition zero
@@ -205,12 +206,14 @@
 Here are some examples of what you might use to boot from such a drive:
 .Pp
 .Dl 0 > Ic "boot scsi/sd@0:9,ofwboot.xcf scsi/sd@0:10,netbsd"
-.Dl 0 > Ic "boot ide0/disk@0:7,ofwboot.xcf ide0/disk@0:9,ofwboot.xcf"
+.Dl 0 > Ic "boot ide0/disk@0:7,ofwboot.xcf ide0/disk@0:9,netbsd"
 .Dl 0 > Ic "boot hd:8,ofwboot.xcf ultra1:3,netbsd"
 .bullet)
 .
 .Ss2 Common Problems and Error Messages
-See the
+.
+This is a brief list of some of the Open Firmware problems you may run 
+into.  See the
 .Nx*M
 FAQ for a thorough list.
 .Lk http://www.netbsd.org/Ports/macppc/faq.html
@@ -283,7 +286,7 @@
 turn your brightness back up.
 .Pp
 Otherwise, you need a serial console. See the section entitled
-.Sx Getting to the Open Firmware Prompt
+.Sx Getting to the Open Firmware Prompt on Older Models
 .It
 Grey screen with flashing question mark
 .Pp
@@ -324,6 +327,14 @@
 .Lk http://www.netbsd.org/Ports/macppc/faq.html#pciide-lost-interrupt
 .bullet)
 .
+.Ss2 Milestone
+.
+If you've reached this point, then you must've gotten the 
+.Nx 
+installer to boot.  Congratulations!  That was the hard part.  From now 
+through the rest of this document, there should be no more Open Firmware 
+specific problems, so read everything because it applies to all models.
+.
 .so ../common/sysinst
 .
 Now, you can reboot to get to the Open Firmware prompt.  Once there, you



Home | Main Index | Thread Index | Old Index