Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/i386/conf Kernel configuration file for my Abit BP6...
details: https://anonhg.NetBSD.org/src/rev/8609f89e37b0
branches: trunk
changeset: 485008:8609f89e37b0
user: thorpej <thorpej%NetBSD.org@localhost>
date: Sun Apr 16 19:46:21 2000 +0000
description:
Kernel configuration file for my Abit BP6+dual Celeron machine. This
could be used as an example configuration file for that motherboard.
diffstat:
sys/arch/i386/conf/SWINGER | 831 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 831 insertions(+), 0 deletions(-)
diffs (truncated from 835 to 300 lines):
diff -r 6312a8150cb2 -r 8609f89e37b0 sys/arch/i386/conf/SWINGER
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/i386/conf/SWINGER Sun Apr 16 19:46:21 2000 +0000
@@ -0,0 +1,831 @@
+# from NetBSD: GENERIC,v 1.325 2000/04/14 14:53:32 augustss Exp
+#
+# SWINGER -- thorpej's Abit BP6+dual Celeron
+#
+
+include "arch/i386/conf/std.i386"
+
+#ident "SWINGER-$Revision: 1.1 $"
+
+maxusers 64 # estimated number of users
+
+# CPU support. At least one is REQUIRED.
+#options I386_CPU
+#options I486_CPU
+#options I586_CPU
+options I686_CPU
+
+# CPU-related options.
+#options MATH_EMULATE # floating point emulation
+#options VM86 # virtual 8086 emulation
+options USER_LDT # user-settable LDT; used by WINE
+# eliminate delay no-ops in I/O; recommended on all but very old machines
+#options DUMMY_NOPS
+
+# delay between "rebooting ..." message and hardware reset, in milliseconds
+#options CPURESET_DELAY=2000
+
+# Misc. i386-specific options
+options XSERVER # X server support in console drivers
+#options XSERVER_DDB # PF12 gets you into DDB when X is running
+
+# This option allows you to force a serial console at the specified
+# I/O address. see console(4) for details.
+#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
+# you don't want the option below ON iff you are using the
+# serial console option of the new boot strap code.
+#options CONS_OVERRIDE # Always use above! independent of boot info
+
+# The following options override the memory sizes passed in from the boot
+# block. Use them *only* if the boot block is unable to determine the correct
+# values. Note that the BIOS may *correctly* report less than 640k of base
+# memory if the extended BIOS data area is located at the top of base memory
+# (as is the case on most recent systems).
+#options REALBASEMEM=639 # size of base memory (in KB)
+#options REALEXTMEM=15360 # size of extended memory (in KB)
+
+# Standard system options
+
+options UCONSOLE # users can use TIOCCONS (for xconsole)
+options INSECURE # disable kernel security levels
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+options NTP # NTP phase/frequency locked loop
+
+options KTRACE # system call tracing via ktrace(1)
+
+options SYSVMSG # System V-like message queues
+options SYSVSEM # System V-like semaphores
+options SYSVSHM # System V-like memory sharing
+#options SHMMAXPGS=1024 # 1024 pages is the default
+
+options LKM # loadable kernel modules
+
+# Diagnostic/debugging support options
+options DIAGNOSTIC # cheap kernel consistency checks
+#options DEBUG # expensive debugging checks/support
+options KMEMSTATS # kernel memory statistics (vmstat -m)
+options DDB # in-kernel debugger
+options DDB_HISTORY_SIZE=100 # enable history editing in DDB
+#options KGDB # remote debugger
+#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
+#makeoptions DEBUG="-g" # compile full symbol table
+
+# Compatibility options
+#options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
+options COMPAT_09 # NetBSD 0.9,
+options COMPAT_10 # NetBSD 1.0,
+options COMPAT_11 # NetBSD 1.1,
+options COMPAT_12 # NetBSD 1.2,
+options COMPAT_13 # NetBSD 1.3,
+options COMPAT_14 # NetBSD 1.4,
+options COMPAT_43 # and 4.3BSD
+#options COMPAT_386BSD_MBRPART # recognize old partition ID
+
+#options COMPAT_SVR4 # binary compatibility with SVR4
+#options COMPAT_IBCS2 # binary compatibility with SCO and ISC
+options COMPAT_LINUX # binary compatibility with Linux
+#options COMPAT_FREEBSD # binary compatibility with FreeBSD
+
+#options COMPAT_AOUT # binary compat for NetBSD a.out binaries
+
+# File systems
+file-system FFS # UFS
+file-system EXT2FS # second extended file system (linux)
+file-system LFS # log-structured file system
+file-system MFS # memory file system
+file-system NFS # Network File System client
+file-system NTFS # Windows/NT file system (experimental)
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+file-system MSDOSFS # MS-DOS file system
+file-system FDESC # /dev/fd
+file-system KERNFS # /kern
+#file-system NULLFS # loopback file system
+#file-system OVERLAY # overlay file system
+#file-system PORTAL # portal filesystem (still experimental)
+file-system PROCFS # /proc
+#file-system UMAPFS # NULLFS + uid and gid remapping
+#file-system UNION # union file system
+#file-system CODA # Coda File System; also needs vcoda (below)
+
+# File system options
+#options QUOTA # UFS quotas
+#options FFS_EI # FFS Endian Independent support
+options SOFTDEP # FFS soft updates support.
+options NFSSERVER # Network File System server
+#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
+ # immutable) behave as system flags.
+
+# Pull in config fragments for kernel crypto. This is required for
+# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
+# one of these, based on whether you use crypto-us or crypto-intl, and
+# adjust the prefixes as necessary.
+
+prefix ../crypto-us/sys
+cinclude "conf/files.crypto-us"
+prefix
+
+#prefix ../crypto-intl/sys
+#cinclude "conf/files.crypto-intl"
+#prefix
+
+# Networking options
+#options GATEWAY # packet forwarding
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+options IPSEC # IP security
+options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
+#options IPSEC_DEBUG # debug for IP security
+#options MROUTING # IP multicast routing
+#options NS # XNS
+#options NSIP # XNS tunneling over IP
+#options ISO,TPIP # OSI
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25
+options NETATALK # AppleTalk networking protocols
+#options PPP_BSDCOMP # BSD-Compress compression support for PPP
+#options PPP_DEFLATE # Deflate compression support for PPP
+#options PPP_FILTER # Active filter support for PPP (requires bpf)
+options PFIL_HOOKS # pfil(9) packet filter hooks
+#options IPFILTER_LOG # ipmon(8) log support
+
+# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
+#options TCP_COMPAT_42
+
+# These options enable verbose messages for several subsystems.
+# Warning, these may compile large string tables into the kernel!
+#options EISAVERBOSE # verbose EISA device autoconfig messages
+options PCIVERBOSE # verbose PCI device autoconfig messages
+#options PCI_CONFIG_DUMP # verbosely dump PCI config space
+#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
+options SCSIVERBOSE # human readable SCSI error messages
+options USBVERBOSE # verbose USB device autoconfig messages
+#options PNPBIOSVERBOSE # verbose PnP BIOS messages
+
+#options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
+
+#
+# wscons options
+#
+# builtin terminal emulations
+#options WSEMUL_SUN # sun terminal emulation
+options WSEMUL_VT100 # VT100 / VT220 emulation
+# different kernel output - see dev/wscons/wsdisplayvar.h
+options WS_KERNEL_FG=WSCOL_GREEN
+#options WS_KERNEL_BG=WSCOL_BLACK
+# compatibility to other console drivers
+options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
+options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
+options WSDISPLAY_COMPAT_USL # VT handling
+options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
+# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
+#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
+# allocate a number of virtual screens at autoconfiguration time
+#options WSDISPLAY_DEFAULTSCREENS=4
+# use a large software cursor that doesn't blink
+options PCDISPLAY_SOFTCURSOR
+
+# Kernel root file system and dump configuration.
+config netbsd root on ? type ?
+#config netbsd root on sd0a type ffs
+#config netbsd root on ? type nfs
+
+#
+# Device configuration
+#
+
+mainbus0 at root
+
+#apm0 at mainbus0 # Advanced power management
+
+# Tuning for power management, see apm(4) for more details.
+#options APM_NO_IDLE # Don't call BIOS CPU idle function
+#options APM_V10_ONLY # Use only the APM 1.0 calls
+#options APM_NO_POWEROFF # Don't power off on halt(8)
+#options APM_POWER_PRINT # Don't print stats on the console
+#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
+
+
+# Basic Bus Support
+
+# PCI bus support
+pci* at mainbus? bus ?
+pci* at pchb? bus ?
+pci* at ppb? bus ?
+
+# Configure PCI using BIOS information
+options PCIBIOS # PCI BIOS support
+options PCIBIOSVERBOSE # PCI BIOS verbose info
+#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
+#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
+#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
+
+# PCI bridges
+pchb* at pci? dev ? function ? # PCI-Host bridges
+#pceb* at pci? dev ? function ? # PCI-EISA bridges
+pcib* at pci? dev ? function ? # PCI-ISA bridges
+ppb* at pci? dev ? function ? # PCI-PCI bridges
+# XXX 'puc's aren't really bridges, but there's no better place for them here
+#puc* at pci? dev ? function ? # PCI "universal" comm. cards
+
+# EISA bus support
+#eisa* at mainbus?
+#eisa* at pceb?
+
+# ISA bus support
+isa* at mainbus?
+#isa* at pceb?
+isa* at pcib?
+
+# PCMCIA bus support
+#pcmcia* at pcic? controller ? socket ?
+#pcmcia* at tcic? controller ? socket ?
+
+# ISA PCMCIA controllers
+#pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
+#pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
+#tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
+
+# PCI PCMCIA controllers
+#pcic0 at pci? dev? function ?
+
+# ISA Plug-and-Play bus support
+isapnp0 at isa?
+
+# ISA Plug-and-Play PCMCIA controllers
+#pcic* at isapnp?
+
+# CardBus bus support
+#cbb* at pci? dev ? function ?
+#cardslot* at cbb?
+
+#cardbus* at cardslot?
+#pcmcia* at cardslot?
+
+# Coprocessor Support
+
+# Math Coprocessor support
+npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
+
+
+# Console Devices
+
+# ISA console. You can only configure one of these!
+#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
+#vt0 at isa? port 0x60 irq 1 # PCVT console driver
+
+# Keyboard layout configuration for pccons
+#options FRENCH_KBD
+#options FINNISH_KBD
+#options GERMAN_KBD
+#options NORWEGIAN_KBD
+
+# wscons
+pckbc0 at isa? # pc keyboard controller
+pckbd* at pckbc? # PC keyboard
+# "opms" should not be enabled together with "pms" or "pmsi"
+pms* at pckbc? # PS/2 mouse for wsmouse
+pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
+#opms* at pckbc? # backwards compatible PS/2 mouse
+#vga0 at isa?
+vga* at pci? dev ? function ?
+#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
+wsdisplay* at vga? console ?
+#wsdisplay* at pcdisplay? console ?
+wskbd* at pckbd? console ?
+wsmouse* at pms? mux 0
Home |
Main Index |
Thread Index |
Old Index