Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-1-5]: src/sys/arch/i386/conf Sync with -current (approved by jhawk).
details: https://anonhg.NetBSD.org/src/rev/fd10588a4a92
branches: netbsd-1-5
changeset: 489725:fd10588a4a92
user: fvdl <fvdl%NetBSD.org@localhost>
date: Mon Oct 09 13:16:24 2000 +0000
description:
Sync with -current (approved by jhawk).
Versions:
INSTALL_LAPTOP: 1.1-1.4 (new)
GENERIC_LAPTOP: 1.1-1.2 (new)
INSTALL_SMALL: 1.57
INSTALL_TINY: 1.27
GENERIC_TINY: 1.22
INSTALL: 1.156
diffstat:
sys/arch/i386/conf/GENERIC_LAPTOP | 711 ++++++++++++++++++++++++++++++++++++++
sys/arch/i386/conf/GENERIC_TINY | 162 +++++---
sys/arch/i386/conf/INSTALL | 55 +-
sys/arch/i386/conf/INSTALL_LAPTOP | 476 +++++++++++++++++++++++++
sys/arch/i386/conf/INSTALL_SMALL | 33 +-
sys/arch/i386/conf/INSTALL_TINY | 70 +-
6 files changed, 1371 insertions(+), 136 deletions(-)
diffs (truncated from 1938 to 300 lines):
diff -r 12e1b15b3739 -r fd10588a4a92 sys/arch/i386/conf/GENERIC_LAPTOP
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/i386/conf/GENERIC_LAPTOP Mon Oct 09 13:16:24 2000 +0000
@@ -0,0 +1,711 @@
+# $NetBSD: GENERIC_LAPTOP,v 1.2.2.2 2000/10/09 13:16:24 fvdl Exp $
+#
+# GENERIC -- everything that's currently supported
+#
+
+include "arch/i386/conf/std.i386"
+
+#ident "GENERIC-$Revision: 1.2.2.2 $"
+
+maxusers 32 # estimated number of users
+
+# CPU support. At least one is REQUIRED.
+options I386_CPU
+options I486_CPU
+options I586_CPU
+options I686_CPU
+
+# CPU-related options.
+options MATH_EMULATE # floating point emulation
+options VM86 # virtual 8086 emulation
+options USER_LDT # user-settable LDT; used by WINE
+# eliminate delay no-ops in I/O; recommended on all but very old machines
+#options DUMMY_NOPS
+
+# delay between "rebooting ..." message and hardware reset, in milliseconds
+#options CPURESET_DELAY=2000
+
+# This option allows you to force a serial console at the specified
+# I/O address. see console(4) for details.
+#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
+# you don't want the option below ON iff you are using the
+# serial console option of the new boot strap code.
+#options CONS_OVERRIDE # Always use above! independent of boot info
+
+# The following options override the memory sizes passed in from the boot
+# block. Use them *only* if the boot block is unable to determine the correct
+# values. Note that the BIOS may *correctly* report less than 640k of base
+# memory if the extended BIOS data area is located at the top of base memory
+# (as is the case on most recent systems).
+#options REALBASEMEM=639 # size of base memory (in KB)
+#options REALEXTMEM=15360 # size of extended memory (in KB)
+
+# Standard system options
+
+options UCONSOLE # users can use TIOCCONS (for xconsole)
+options INSECURE # disable kernel security levels
+
+options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
+options NTP # NTP phase/frequency locked loop
+
+options KTRACE # system call tracing via ktrace(1)
+
+options SYSVMSG # System V-like message queues
+options SYSVSEM # System V-like semaphores
+options SYSVSHM # System V-like memory sharing
+#options SHMMAXPGS=1024 # 1024 pages is the default
+
+options LKM # loadable kernel modules
+
+# Diagnostic/debugging support options
+options DIAGNOSTIC # cheap kernel consistency checks
+#options DEBUG # expensive debugging checks/support
+#options KMEMSTATS # kernel memory statistics (vmstat -m)
+options DDB # in-kernel debugger
+options DDB_HISTORY_SIZE=512 # enable history editing in DDB
+#options KGDB # remote debugger
+#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
+#makeoptions DEBUG="-g" # compile full symbol table
+
+# Compatibility options
+options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
+options COMPAT_09 # NetBSD 0.9,
+options COMPAT_10 # NetBSD 1.0,
+options COMPAT_11 # NetBSD 1.1,
+options COMPAT_12 # NetBSD 1.2,
+options COMPAT_13 # NetBSD 1.3,
+options COMPAT_14 # NetBSD 1.4,
+options COMPAT_43 # and 4.3BSD
+options COMPAT_386BSD_MBRPART # recognize old partition ID
+
+options COMPAT_SVR4 # binary compatibility with SVR4
+options COMPAT_IBCS2 # binary compatibility with SCO and ISC
+options COMPAT_LINUX # binary compatibility with Linux
+options COMPAT_FREEBSD # binary compatibility with FreeBSD
+#options COMPAT_PECOFF # kernel support to run Win32 apps
+
+# File systems
+file-system FFS # UFS
+file-system EXT2FS # second extended file system (linux)
+file-system LFS # log-structured file system
+file-system MFS # memory file system
+file-system NFS # Network File System client
+file-system NTFS # Windows/NT file system (experimental)
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+file-system MSDOSFS # MS-DOS file system
+file-system FDESC # /dev/fd
+file-system KERNFS # /kern
+file-system NULLFS # loopback file system
+file-system OVERLAY # overlay file system
+file-system PORTAL # portal filesystem (still experimental)
+file-system PROCFS # /proc
+file-system UMAPFS # NULLFS + uid and gid remapping
+file-system UNION # union file system
+file-system CODA # Coda File System; also needs vcoda (below)
+
+# File system options
+options QUOTA # UFS quotas
+#options FFS_EI # FFS Endian Independent support
+options SOFTDEP # FFS soft updates support.
+options NFSSERVER # Network File System server
+#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
+ # immutable) behave as system flags.
+
+# Networking options
+#options GATEWAY # packet forwarding
+options INET # IP + ICMP + TCP + UDP
+options INET6 # IPV6
+#options IPSEC # IP security
+#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
+#options IPSEC_DEBUG # debug for IP security
+#options MROUTING # IP multicast routing
+options NS # XNS
+#options NSIP # XNS tunneling over IP
+options ISO,TPIP # OSI
+#options EON # OSI tunneling over IP
+options CCITT,LLC,HDLC # X.25
+options NETATALK # AppleTalk networking protocols
+options PPP_BSDCOMP # BSD-Compress compression support for PPP
+options PPP_DEFLATE # Deflate compression support for PPP
+options PPP_FILTER # Active filter support for PPP (requires bpf)
+options PFIL_HOOKS # pfil(9) packet filter hooks
+options IPFILTER_LOG # ipmon(8) log support
+
+# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
+#options TCP_COMPAT_42
+
+# These options enable verbose messages for several subsystems.
+# Warning, these may compile large string tables into the kernel!
+options MIIVERBOSE # verbose PHY autoconfig messages
+options PCIVERBOSE # verbose PCI device autoconfig messages
+#options PCI_CONFIG_DUMP # verbosely dump PCI config space
+#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
+options SCSIVERBOSE # human readable SCSI error messages
+options USBVERBOSE # verbose USB device autoconfig messages
+#options PNPBIOSVERBOSE # verbose PnP BIOS messages
+#options PNPBIOSDEBUG # more fulsome Pnp BIOS debugging messages
+
+options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
+
+#
+# wscons options
+#
+# builtin terminal emulations
+#options WSEMUL_SUN # sun terminal emulation
+options WSEMUL_VT100 # VT100 / VT220 emulation
+# different kernel output - see dev/wscons/wsdisplayvar.h
+options WS_KERNEL_FG=WSCOL_GREEN
+#options WS_KERNEL_BG=WSCOL_BLACK
+# compatibility to other console drivers
+options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
+options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
+options WSDISPLAY_COMPAT_USL # VT handling
+options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
+# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
+#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
+# allocate a number of virtual screens at autoconfiguration time
+#options WSDISPLAY_DEFAULTSCREENS=4
+# use a large software cursor that doesn't blink
+options PCDISPLAY_SOFTCURSOR
+# modify the screen type of the console; defaults to "80x25"
+#options WSCONS_DEFAULT_TYPE="80x24"
+
+# Kernel root file system and dump configuration.
+config netbsd root on ? type ?
+#config netbsd root on sd0a type ffs
+#config netbsd root on ? type nfs
+
+#
+# Device configuration
+#
+
+mainbus0 at root
+
+apm0 at mainbus0 # Advanced power management
+
+# Tuning for power management, see apm(4) for more details.
+#options APM_NO_IDLE # Don't call BIOS CPU idle function
+#options APM_V10_ONLY # Use only the APM 1.0 calls
+#options APM_NO_POWEROFF # Don't power off on halt(8)
+#options APM_POWER_PRINT # Print stats on the console
+#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
+
+
+# Basic Bus Support
+
+# Plug-and-Play BIOS and attached devices
+
+#pnpbios* at mainbus?
+
+# mainboard audio chips
+#ess* at pnpbios? index ? # ESS AudioDrive
+#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
+#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
+#ym* at pnpbios? index ? # OPL3-SA3
+
+# com port
+# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
+# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
+# will be no com0. A side effect is pcmcia (and other) com? previously
+# starting at com3 may attach as com1 or com2.
+#com* at pnpbios? index ? # serial ports
+
+# parallel port
+# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
+# "printer interfaces".
+#lpt* at pnpbios? index ? # parallel ports
+
+#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
+#fdc* at pnpbios? index ? # floppy controller
+
+# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
+#pciide* at pnpbios? index ?
+
+# PCI bus support
+pci* at mainbus? bus ?
+pci* at pchb? bus ?
+pci* at ppb? bus ?
+
+# Configure PCI using BIOS information
+options PCIBIOS # PCI BIOS support
+options PCIBIOSVERBOSE # PCI BIOS verbose info
+options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
+options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
+options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
+#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
+options PCIBIOS_INTR_GUESS # see pcibios(4)
+#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
+
+# PCI bridges
+pchb* at pci? dev ? function ? # PCI-Host bridges
+pcib* at pci? dev ? function ? # PCI-ISA bridges
+ppb* at pci? dev ? function ? # PCI-PCI bridges
+# XXX 'puc's aren't really bridges, but there's no better place for them here
+puc* at pci? dev ? function ? # PCI "universal" comm. cards
+
+# ISA bus support
+isa* at mainbus?
+isa* at pcib?
+
+# PCMCIA bus support
+pcmcia* at pcic? controller ? socket ?
+pcmcia* at tcic? controller ? socket ?
+
+# ISA PCMCIA controllers
+pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
+pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
+tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
+
+# PCI PCMCIA controllers
+pcic0 at pci? dev? function ?
+
+# ISA Plug-and-Play bus support
+isapnp0 at isa?
+
+# ISA Plug-and-Play PCMCIA controllers
+pcic* at isapnp?
+
+# CardBus bridge support
+cbb* at pci? dev ? function ?
+cardslot* at cbb?
+
+# CardBus bus support
+cardbus* at cardslot?
+pcmcia* at cardslot?
+
+# Coprocessor Support
+
+# Math Coprocessor support
+npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
+
+
+# Console Devices
+
+# ISA console
+#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
+# Keyboard layout configuration for pccons
+#options FRENCH_KBD
+#options FINNISH_KBD
+#options GERMAN_KBD
+#options NORWEGIAN_KBD
+# pccons-specific options:
+#options XSERVER_DDB # PF12 gets you into DDB when X is running
+#options XSERVER # X server support
+
+
+# wscons
Home |
Main Index |
Thread Index |
Old Index