Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-1-5]: src/etc/default pull up rev 1.4 (approved by thorpej):
details: https://anonhg.NetBSD.org/src/rev/5cc093f60bf7
branches: netbsd-1-5
changeset: 489628:5cc093f60bf7
user: lukem <lukem%NetBSD.org@localhost>
date: Mon Oct 02 03:09:12 2000 +0000
description:
pull up rev 1.4 (approved by thorpej):
move default config files from /etc/default -> /etc/defaults, to be
consistent with what FreeBSD uses /etc/defaults for, and since SVR4
uses /etc/default for another purpose.
as discussed on tech-userlevel, and no objections were made.
diffstat:
etc/default/rc.conf | 173 ----------------------------------------------------
1 files changed, 0 insertions(+), 173 deletions(-)
diffs (177 lines):
diff -r 94d5781f9ec9 -r 5cc093f60bf7 etc/default/rc.conf
--- a/etc/default/rc.conf Mon Oct 02 03:06:38 2000 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,173 +0,0 @@
-# $NetBSD: rc.conf,v 1.1.2.3 2000/09/22 02:42:45 hubertf Exp $
-#
-# /etc/default/rc.conf --
-# default configuration of /etc/rc.conf
-#
-# see rc.conf(5) for more information.
-#
-
-#
-# Use program=YES to enable program, NO to disable it. program_flags are
-# passed to the program on the command line.
-#
-
-# Uncomment this if you want to use local paths in rc.
-#
-#export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin
-
-# If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.
-#
-do_rcshutdown=YES
-
-# Basic network configuration
-#
-
-# Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu).
-# If blank, use /etc/myname.
-#
-hostname=""
-
-# If there's only one way out of your network, set this to the hostname
-# or the IP address of the router that will get your packets off the LAN.
-# If blank, use /etc/mygate.
-#
-defaultroute=""
-
-# The NIS domain name (formerly known as Yellow Pages); not in any way
-# related to Internet domain names.
-# If blank, use /etc/defaultdomain.
-#
-domainname=""
-
-# Filesystems to mount early in boot-up.
-# Note that `/var' is needed in $critical_filesystems_beforenet (or
-# implied as part of `/') as certain services that need /var (such as
-# dhclient) may be needed to get the network operational enough to mount
-# the $critical_filesystems.
-#
-critical_filesystems_beforenet="/var"
-critical_filesystems="/usr"
-
-# Set this to YES if you have purposefully setup no swap partitions and
-# don't want to be warned about it.
-#
-no_swap=NO
-
-# One-time actions and programs on boot-up.
-#
-lkm=NO # run /etc/rc.lkm
-savecore=YES savecore_flags="-z"
-clear_tmp=YES # clear /tmp after reboot
-update_motd=YES # updates /etc/motd
-dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot
-accounting=NO # needs /var/account/acct
-
-# NOTE: default coredump name now set in /etc/sysctl.conf
-
-# Security setting. If $securelevel is non-empty, the system securelevel
-# is set to this value early in the boot sequence. Otherwise the default
-# action is taken (see init(8)).
-#
-securelevel="" # securelevel to set to
-
-# To set the IP address of an interface either use
-# ifconfig_xxN="IP-NO"
-# where xxN is the interface. If this variable is not set then
-# contents of the file /etc/ifconfig.xxN is used.
-
-# Networking startup.
-#
-ipfilter=NO # uses /etc/ipf.conf
-ipnat=NO # uses /etc/ipnat.conf
-ipsec=NO # uses /etc/ipsec.conf
-ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages
-auto_ifconfig=YES # config all avail. interfaces
-net_interfaces="" # used only if above is NO
-flushroutes=YES # flush routes in netstart
-dhclient=NO # behave as a DHCP client
-dhclient_flags="" # blank: config all interfaces
-ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall
-ppp_peers="" # /etc/ppp/peers to call
-ip6mode=host # host, autohost or router
-rtsol=NO rtsol_flags="" # for ip6mode=autohost only
-
-# Daemons required by servers. These are not needed for strictly client use.
-#
-
-# inetd is used to start the IP-based services enabled in /etc/inetd.conf
-#
-inetd=YES inetd_flags="-l" # -l logs libwrap
-
-# rpcbind (formerly known as 'portmap') is used to look up RPC-based services.
-#
-rpcbind=NO rpcbind_flags="-l" # -l logs libwrap
-
-# Commonly used daemons.
-#
-syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only
-cron=YES
-named=NO named_flags=""
-timed=NO timed_flags=""
-ntpd=NO ntpd_flags=""
-sendmail=NO sendmail_flags="-bd -q30m"
-postfix=NO
-lpd=NO lpd_flags="-s" # -s "secure" unix domain only
-sshd=NO sshd_flags=""
-
-# Routing daemons.
-#
-routed=NO routed_flags="-q"
-gated=NO gated_flags=""
-mrouted=NO mrouted_flags=""
-route6d=NO route6d_flags=""
-rtsold=NO rtsold_flags="" # for ip6mode=autohost only
-
-# Daemons used to boot other hosts over a network.
-#
-rarpd=NO rarpd_flags="-a"
-bootparamd=NO bootparamd_flags=""
-dhcpd=NO dhcpd_flags="-q"
-dhcrelay=NO dhcrelay_flags=""
-rbootd=NO rbootd_flags=""
-mopd=NO mopd_flags="-a"
-rtadvd=NO rtadvd_flags=""
-
-# X11 daemons.
-#
-xfs=NO xfs_flags="" # X11 font server
-xdm=NO xdm_flags="" # X11 display manager; needs
- # wscons=YES for local displays.
-
-# YP (NIS) daemons.
-#
-ypbind=NO ypbind_flags=""
-ypserv=NO ypserv_flags="-d"
-yppasswdd=NO yppasswdd_flags=""
-
-# NFS daemons and parameters.
-#
-nfs_client=NO # enable client daemons
-nfs_server=NO # enable server daemons
- mountd_flags=""
- nfsd_flags="-6tun 4"
-lockd=NO lockd_flags=""
-statd=NO statd_flags=""
-amd=NO amd_flags="-l syslog -x error,noinfo,nostats"
- amd_dir=/amd # mount dir
- amd_master=/etc/amd/master # master map
-
-# Heimdal Kerberos 5 KDC (with Kerberos IV compatibility)
-kdc=NO kdc_flags=""
-
-# Other daemons.
-#
-rwhod=NO
-
-# Hardware daemons.
-#
-apmd=NO apmd_flags="" # APM power management daemon.
-screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker
-
-# Configuration of "wscons" console driver virtual screens.
-#
-wscons=NO wscons_flags="" # setup wscons from wscons.conf
Home |
Main Index |
Thread Index |
Old Index