[src/trunk]: src/distrib/utils/sysinst Moved from ./msg.mi.eng,v

[cgd <cgd%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/62a1679654c2
branches:  trunk
changeset: 473861:62a1679654c2
user:      cgd <cgd%NetBSD.org@localhost>
date:      Sun Jun 20 05:48:48 1999 +0000

description:
Moved from ./msg.mi.eng,v

diffstat:

 distrib/utils/sysinst/msg.mi.en |  724 ++++++++++++++++++++++++++++++++++++++++
 1 files changed, 724 insertions(+), 0 deletions(-)

diffs (truncated from 728 to 300 lines):

diff -r 5d0131918c2e -r 62a1679654c2 distrib/utils/sysinst/msg.mi.en
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/distrib/utils/sysinst/msg.mi.en   Sun Jun 20 05:48:48 1999 +0000
@@ -0,0 +1,724 @@
+/*     $NetBSD: msg.mi.en,v 1.43 1999/06/20 05:48:49 cgd Exp $ */
+
+/*
+ * Copyright 1997 Piermont Information Systems Inc.
+ * All rights reserved.
+ *
+ * Written by Philip A. Nelson for Piermont Information Systems Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *      This product includes software develooped for the NetBSD Project by
+ *      Piermont Information Systems Inc.
+ * 4. The name of Piermont Information Systems Inc. may not be used to endorse
+ *    or promote products derived from this software without specific prior
+ *    written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE 
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/* MI Message catalog -- english, machine independent */
+
+message usage
+{usage: sysinst [-r release]
+}
+
+message yes {Yes}
+
+message no {No}
+
+message install
+{install}
+
+message reinstall
+{re-install sets for}
+
+message upgrade
+{upgrade}
+
+message hello
+{Welcome to sysinst, the NetBSD-@@VERSION@@ system installation tool.
+This menu-driven tool is designed to help you install NetBSD to a hard
+disk, or upgrade an existing NetBSD system, with a minimum of work.
+In the following menus, you may change the current selection by
+either typing the reference letter (a, b, c, ...).  Arrow keys may also work.
+You activate the current selection from the menu by typing the enter key.
+
+If you booted from a floppy, you may now remove the disk.
+
+Thank you for using NetBSD!
+}
+
+message installusure
+{You have chosen to install NetBSD on your hard disk.  This will change
+information on your hard disk.  You should have made a full backup
+before this procedure!  This procedure will do the following things:
+       a) Partition your disk
+       b) Create new BSD file systems
+       c) Load and install distribution sets
+
+(After you enter the partition information but before your disk is 
+changed, you will have the opportunity to quit this procedure.)
+Shall we continue?  
+}
+
+message upgradeusure
+{Ok, lets upgrade NetBSD on your hard disk.  As always, this will
+change information on your hard disk.  You should have made a full backup
+before this procedure!  Do you really want to upgrade NetBSD?
+(This is your last warning before this procedure starts modifying your
+disks.)
+}
+
+message reinstallusure
+{Ok, lets unpack the NetBSD distribution sets to a bootable hard disk.
+This procedure just fetches and unpacks sets onto an pre-partitioned
+bootable disk. It does not label disks, upgrade bootblocks, or save
+any existing configuration info.  (Quit and choose `install' or
+`upgrade' if you want those options.)  You should have already done an
+`install' or `upgrade' before starting this procedure!
+
+Do you really want to re-install NetBSD distribution sets?
+(This is your last warning before this procedure starts modifying your
+disks.)
+}
+
+
+message nodisk
+{I can not find any hard disks for use by NetBSD.  You will be
+returned to the original menu.
+}
+
+message onedisk
+{I found only one disk, %s.  Therefore I assume you want to %s
+NetBSD on it.
+}
+
+message askdisk
+{I have found the following disks: %s
+\nOn which disk do you want to install NetBSD? }
+
+message badname
+{You did not choose one of the listed disks.  Please try again.
+The following disks are available: %s
+\nOn which disk do you want to install NetBSD? }
+
+message disktoosmall
+{Your hard disk is too small for a standard install. You will have to enter
+the partitions size by hand.
+}
+
+message pleasemountroot
+{The root device is not mounted.  Please mount it.
+
+Your selected target disk %s also holds the current root device.  I
+need to know whether I'm currently running out of the target root
+(%sa), or out of an alternate root (say, in %sb, your swap partition).
+I can't tell unless you mount the root.
+
+I'm aborting back to the main menu so you can fork a subshell.
+}
+
+message cylinders
+{cylinders}
+
+message heads
+{heads}
+
+message sectors
+{sectors}
+
+message size
+{size}
+
+message start
+{start}
+
+message offset
+{offset}
+
+message bsize
+{block size}
+
+message fsize
+{frag size}
+
+message mountpoint
+{mount point}
+
+message cylname
+{cyl}
+
+message secname
+{sec}
+
+message megname
+{meg}
+
+message layout
+{NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk
+into multiple BSD partitions.  You must now set up your BSD disklabel.
+You have several choices.  They are summarized below.
+-- Standard: the BSD disklabel partitions are computed by this program.
+-- Standard with X: twice the swap space, space for X binaries.
+-- Custom: you specify the sizes of all the BSD disklabel partitions.
+
+The NetBSD part of your disk is %.2f Megabytes.
+Standard requires at least %.2f Megabytes.
+Standard with X requires at least %.2f Megabytes.
+}
+
+message sizechoice
+{You have elected to specify partition sizes (either for the BSD
+disklabel, or on some ports, for MBR slices). You must first choose a
+size unit to use.  Choosing megabytes will give partition sizes close
+to your choice, but aligned to cylinder boundaries. Choosing sectors
+will allow you to more acurately specify the sizes.  On modern ZBR disks,
+acutal cylinder size varies across the disk and there is little real
+gain from cylinder alignment. On older disks, it is most efficient to
+choose partition sizes that are exact multiples of your actual
+cylinder size, which is %d sectors.
+}
+
+message defaultunit
+{Unless specified with 'M' (megabytes), 'c' (cylinders) or 's' sector
+at the end of input, sizes and offsets are in %s.
+}
+
+message startoutsidedisk
+{The start value you specified is beyond the end of the disk.
+}
+
+message endoutsidedisk
+{With this value, the partition end is beyond the end of the disk. Your
+partition size has been truncated to %d %s.
+}
+
+message fspart
+{We now have your BSD-disklabel partitions as (Size and Offset in %s):
+}
+
+message fspart_head
+{id:      Size    Offset       End FStype Bsize Fsize Mount point
+---      ----    ------       --- ------ ----- ----- -----------
+}
+
+
+message edfspart
+{You should set the file system (FS) kind first.  Then set the other values.
+
+The current values for partition %c are:
+
+}
+
+message not42bsd
+{Partition %c is not of type 4.2BSD and thus does not have a block and
+frag size to set.
+}
+
+message packname
+{Please enter a name for your NetBSD disk}
+
+message lastchance
+{Ok, we are now ready to install NetBSD on your hard disk.  Nothing has been
+written yet.  This is your last chance to quit this process before anything
+gets changed.  Shall we continue?
+}
+
+message disksetupdone
+{Okay, the first part of the procedure is finished. sysinst has
+written a disklabel to the target disk, and newfs'ed and fsck'ed
+the new partitions you specified for the target disk.
+If you see error messages above that indicate problems with the
+target-disk filesystems -- especially / and /usr --  abort now.
+
+If the target filesystems look good, the next step is to fetch and
+unpack the distribution filesets.  Press <return> to proceed.
+}
+
+message openfail
+{Could not open %s, error message was: %s.
+}
+
+message statfail
+{Can't get properties of %s, error message was: %s.
+}
+
+message unlink_fail
+{I was unable to delete %s, error message was: %s.
+}
+
+message rename_fail
+{I was unable to rename %s to %s, error message was: %s.
+}
+
+message deleting_files
+{As part of the upgrade procedure, the following have to be deleted:
+}
+
+message deleting_dirs
+{As part of the upgrade procedure, the following directories have to be
+deleted (I will rename those that are not empty):
+}
+
+message renamed_dir
+{The directory %s has been renamed to %s because it was not empty.
+}
+
+message cleanup_warn
+{Cleanup of the existing install failed. This may cause cause the extraction
+of the set to fail.
+}
+
+message nomount
+{Partition %c's type is not 4.2BSD or msdos and therefore does not have
+a mount point.}
+
+message mountfail