Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/trunk]: src/sys/arch/amiga/conf Cut-down kernel for miniroot installation.



details:   https://anonhg.NetBSD.org/src/rev/2b5971a300b4
branches:  trunk
changeset: 471999:2b5971a300b4
user:      is <is%NetBSD.org@localhost>
date:      Sat Apr 17 19:05:19 1999 +0000

description:
Cut-down kernel for miniroot installation.
Leave everything out that isn't needed.

diffstat:

 sys/arch/amiga/conf/MDINSTALL |  285 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 285 insertions(+), 0 deletions(-)

diffs (289 lines):

diff -r 1d1cedf5235d -r 2b5971a300b4 sys/arch/amiga/conf/MDINSTALL
--- /dev/null   Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/amiga/conf/MDINSTALL     Sat Apr 17 19:05:19 1999 +0000
@@ -0,0 +1,285 @@
+#      $NetBSD: MDINSTALL,v 1.1 1999/04/17 19:05:19 is Exp $
+
+#
+# INSTALL kernel for ramdisk installation
+#
+
+include "arch/amiga/conf/std.amiga"
+
+maxusers       8
+options        RTC_OFFSET=0
+
+#
+# mainboards to support (in addition to Amiga)
+#
+options        DRACO
+options        BB060STUPIDROM  # You need this, if you have a non-DraCo
+                               # MC68060 with an OS ROM up to (at least) 
+                               # V40 (OS3.1) and want to boot with the
+                               # bootblock.
+                               # You do not need this if you have a DraCo,
+                               # have no 68060 or NEVER use the bootblock
+#
+# processors this kernel should support
+#
+options        M68060          # support for 060
+options        M060SP          # MC68060 software support (Required for 060)
+options        M68040          # support for 040
+options        FPSP            # MC68040 floating point support
+options        M68030          # support for 030
+options        M68020          # support for 020/851
+options        FPU_EMULATE     # FPU emulation
+#
+# Networking options
+#
+options        INET            # IP networking support (Required)
+options        PPP_BSDCOMP     # BSD-Compress compression support for PPP
+options        PPP_DEFLATE     # Deflate compression support for PPP
+options        PPP_FILTER      # Active filter support for PPP (requires bpf)
+
+# Filesystems
+file-system    FFS             # Berkeley fast file system
+file-system    MFS             # Memory based filesystem
+file-system    NFS             # Network File System client side code
+file-system    ADOSFS          # AmigaDOS file system
+file-system    CD9660          # ISO 9660 + Rock Ridge filesystem
+file-system    MSDOSFS         # MS-DOS filesystem
+file-system    KERNFS          # kernel data-structure filesystem
+
+#
+# Support for various kernel options
+#
+options        KTRACE          # system call tracing support
+options        NKMEMCLUSTERS=256       # Size of kernel malloc area
+options        UCONSOLE        # anyone can redirect a virtual console
+#options       INSECURE        # allow, among other insecure stuff, LKM 
+                               # loading in multi-user mode.
+options        SCSIVERBOSE     # Verbose SCSI errors
+
+options        NTP             # NTP phase/frequency locked loop
+
+#
+# Misc. debugging options
+#
+options        DDB             # Kernel debugger
+#options       DDB_HISTORY_SIZE=100    # Enable history editing in DDB
+options        DIAGNOSTIC      # Extra kernel sanity checks
+#options       DEBUG           # Enable misc. kernel debugging code
+#options       SYSCALL_DEBUG   # debug all syscalls.
+#options       SCSIDEBUG       # Add SCSI debugging statements
+#options       PANICBUTTON     # Forced crash via keypress (???)
+
+#
+# Amiga specific options
+#
+#options       LIMITMEM=24     # Do not use more than LIMITMEM MB of the
+                               # first bank of RAM. (default: unlimited)
+#options       NKPTADD=4       # set this for 4 additional KPT pages
+#options       NKPTADDSHIFT=24 # set this for 1 additional KPT page
+                               # per 16 MB (1<<24 bytes) of RAM
+                                # define and decrease this, or define and
+                                # increase NKPTADD if you get "out of PT pages"
+                                # panics.
+
+# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
+# before the 10 secondinterval ends, or that KBDRESET does work at all.
+#options       KBDRESET        # sync on Ctrl-Amiga-Amiga
+
+# These options improve performance with the built-in serial port
+# on slower Amigas.  Try the larger buffers first then lev6_defer.
+#options       SERIBUF_SIZE=4096
+#options       SEROBUF_SIZE=32
+#options       LEV6_DEFER      # defers l6 to l4 (below serial l5)
+
+options        RETINACONSOLE   # enable code to allow retina to be console
+options        ULOWELLCONSOLE  # enable code to allow a2410 to be console
+options        CL5426CONSOLE   # Cirrus console
+options        CV64CONSOLE     # CyberVision console
+options        TSENGCONSOLE    # Tseng console
+options        CV3DCONSOLE     # CyberVision 64/3D console
+
+options        GRF_ECS         # Enhanced Chip Set
+options        GRF_NTSC        # NTSC
+options        GRF_PAL         # PAL
+options        GRF_A2024       # Support for the A2024
+options        GRF_AGA         # AGA Chip Set
+options        GRF_AGA_VGA     # AGA VGAONLY timing
+options        GRF_SUPER72     # AGA Super-72
+#options       KFONT_8X11      # 8x11 font
+
+# This is how you would tell the kernel the A2410 oscillator frequencies:
+# The used frequencies are the defaults, and do not need option setting
+#options       ULOWELL_OSC1=36000000
+#options       ULOWELL_OSC2=66667000
+
+# This is how you specify the blitting speed, higher values may speed up blits
+# a littel bit.  If you raise this value too much some trash may appear.
+# the commented version is the default.
+#options       RH_MEMCLK=61000000
+# this option enables the 64 bit sprite which does not work
+# for quite a few people.  E.g. The cursor sprite will turn to a block
+# when moved to the top of the screen in X.
+#options       RH_64BIT_SPRITE
+# enables fast scroll code appears to now work on 040 systems.
+#options       RETINA_SPEED_HACK
+# enables the Hardwarecursor which does not work on some systems.
+#options       RH_HARDWARECURSOR
+
+grfcc0         at mainbus0             # custom chips
+grfrt0         at zbus0                # retina II
+grfrh0         at zbus0                # retina III
+grfcl*         at zbus0                # Picasso II/Piccalo/Spectrum
+grful0         at zbus0                # A2410
+grfcv0         at zbus0                # CyberVision 64
+grfet*         at zbus0                # Tseng (oMniBus, Domino, Merlin)
+grfcv3d0       at zbus0                # CyberVision 64/3D
+
+grf0           at grfcc0
+grf1           at grfrt0
+grf2           at grfrh0
+grf3           at grfcl?
+grf4           at grful0
+grf5           at grfcv0
+grf6           at grfet?
+grf7           at grfcv3d0
+
+ite0           at grf0                 # terminal emulators for grfs
+ite1           at grf1                 # terminal emulators for grfs
+ite2           at grf2                 # terminal emulators for grfs
+ite3           at grf3                 # terminal emulators for grfs
+ite4           at grf4                 # terminal emulators for grfs
+ite5           at grf5                 # terminal emulators for grfs
+ite6           at grf6                 # terminal emulators for grfs
+ite7           at grf7                 # terminal emulators for grfs
+
+msc0           at zbus0                # A2232 MSC multiport serial.
+mfc0           at zbus0                # MultiFaceCard I/O board
+mfcs0          at mfc0 unit 0          # MFC serial
+mfcs1          at mfc0 unit 1          # MFC serial
+#mfcp0         at mfc0 unit 0          # MFC parallel [not available yet]
+#mfc1          at zbus0                # MultiFaceCard 2nd I/O board
+#mfcs2         at mfc1 unit 0
+#mfcs3         at mfc1 unit 1
+#mfcp1         at mfc1 unit 0
+
+hyper*         at zbus?                # zbus HyperCom3 + HyperCom4
+#hyper*                at mainbus0             # not yet: HyperCom1 + HyperCom3
+com*           at hyper? port ?        # Hypercom3/4 serial ports
+#lpt*          at hyper? port ?        # not yet: Hypercom3 parallel port
+
+#
+# Amiga Mainboard devices (sans graphics and keyboard)
+#
+
+ser0           at mainbus0             # Amiga onboard serial
+par0           at mainbus0             # Amiga onboard parallel
+ms*            at mainbus0             # Amiga mice
+fdc0           at mainbus0             # Amiga FDC
+fd*            at fdc0 unit ?          # floppy disks on the later
+a34kbbc0       at mainbus0             # A3000/A4000 battery backed clock
+a2kbbc0        at mainbus0             # A2000 battery backed clock
+aucc*          at mainbus0             # Amiga CC audio
+audio*         at aucc?
+
+#
+# DraCo Mainboard devices (sans keyboard)
+#
+
+drbbc0         at mainbus0             # DraCo battery backed clock
+drsupio0       at mainbus0             # DraCo superio chip
+com*           at drsupio? port ?      # DraCo serial
+lpt0           at drsupio? port ?      # DraCo parallel
+
+#
+# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
+#
+
+# Ethernet cards:
+le*            at zbus0                # A2065, Ameristar, Ariadne
+ne*            at zbus0                # AriadneII
+ed0            at zbus0                # Hydra, ASDG LanRover
+es0            at zbus0                # CEI A4066 EthernetPLUS
+qn0            at zbus0                # Quicknet
+
+# Arcnet
+bah*           at zbus0                # C=/Ameristar A2060 / 560
+
+# Greater Valley Product Bus
+gvpbus*        at zbus0
+
+# scsi stuff, all possible
+gtsc0          at gvpbus?              # GVP series II scsi
+scsibus*       at gtsc0
+ahsc0          at mainbus0             # A3000 scsi
+scsibus*       at ahsc0
+atzsc0         at zbus0                # A2091 scsi
+scsibus*       at atzsc0
+wstsc0         at zbus0                # Wordsync II scsi
+scsibus*       at wstsc0
+ivsc0          at zbus0                # IVS scsi
+scsibus*       at ivsc0
+mlhsc0         at zbus0                # Hacker scsi
+scsibus*       at mlhsc0
+otgsc0         at zbus0                # 12 gauge scsi
+scsibus*       at otgsc0
+zssc0          at zbus0                # Zeus scsi
+scsibus*       at zssc0
+mgnsc0         at zbus0                # Magnum scsi
+scsibus*       at mgnsc0
+wesc0          at zbus0                # Warp Engine scsi
+scsibus*       at wesc0
+afsc0          at zbus0                # A4091 scsi
+scsibus*       at afsc0
+aftsc0         at mainbus0             # A4000T scsi
+scsibus*       at aftsc0
+flsc0          at zbus0                # FastlaneZ3 scsi
+scsibus*       at flsc0
+bzsc0          at zbus0                # Blizzard 1230 I,II scsi 
+scsibus*       at bzsc0
+bzivsc0        at zbus0                # Blizzard 12x0 IV scsi 
+scsibus*       at bzivsc0
+bztzsc0        at zbus0                # Blizzard 2060 scsi
+scsibus*       at bztzsc0
+cbsc0          at zbus0                # CyberSCSI I
+scsibus*       at cbsc0
+cbiisc0        at zbus0                # CyberSCSI II
+scsibus*       at cbiisc0
+cbiiisc0       at zbus0                # Cyberstorm mk.III/Cyberstorm PPC SCSI
+scsibus*       at cbiiisc0
+empsc0         at zbus0                # Emplant scsi
+scsibus*       at empsc0
+idesc0         at mainbus0             # A4000 & A1200 IDE
+scsibus*       at idesc0
+
+drsc0          at mainbus0             # DraCo scsi
+scsibus*       at drsc0
+
+
+# each hard drive from low target to high
+# will configure to the next available sd unit number
+sd*    at scsibus? target ? lun ?      # scsi disks
+st*    at scsibus? target ? lun ?      # scsi tapes
+cd*    at scsibus? target ? lun ?      # scsi cds
+
+pseudo-device  loop                    # loopback network interface
+pseudo-device  sl              1       # SLIP network interfaces
+pseudo-device  ppp             1       # PPP network interfaces
+
+pseudo-device  view            10      # views
+pseudo-device  pty             16      # pseudo ptys
+
+pseudo-device  vnd             4       # vnode pseudo-disks
+
+# rnd is EXPERIMENTAL at this point.
+#pseudo-device  rnd                     # /dev/random and in-kernel generator
+#options        RND_COM                 # use "com" randomness as well (BROKEN)
+
+config netbsd root on ? type ?
+
+# Enable the hooks used for initializing the root memory-disk.
+options        MEMORY_DISK_HOOKS
+options        MEMORY_DISK_IS_ROOT     # force root on memory disk
+options        MEMORY_DISK_SERVER=0    # no userspace memory disk support
+options        MINIROOTSIZE=2048       # size of memory disk, in blocks
+
+pseudo-device  md              1       # memory disk [ramdisk]



Home | Main Index | Thread Index | Old Index