[src/netbsd-1-4]: src/distrib/notes/atari pullup 1.12->1.14 (leo)

[perry <perry%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/87a6b88d5611
branches:  netbsd-1-4
changeset: 468597:87a6b88d5611
user:      perry <perry%NetBSD.org@localhost>
date:      Fri Apr 30 19:00:15 1999 +0000

description:
pullup 1.12->1.14 (leo)

diffstat:

 distrib/notes/atari/hardware |  39 +++++++++++++++++++++++++++------------
 1 files changed, 27 insertions(+), 12 deletions(-)

diffs (75 lines):

diff -r 75fc3646fd97 -r 87a6b88d5611 distrib/notes/atari/hardware
--- a/distrib/notes/atari/hardware      Fri Apr 30 18:59:17 1999 +0000
+++ b/distrib/notes/atari/hardware      Fri Apr 30 19:00:15 1999 +0000
@@ -1,4 +1,4 @@
-.\"    $NetBSD: hardware,v 1.10.2.2 1999/04/23 15:45:04 perry Exp $    
+.\"    $NetBSD: hardware,v 1.10.2.3 1999/04/30 19:00:15 perry Exp $    
 NetBSD/atari \*V runs on a TT030, Falcon and Hades. An FPU is not required.
 The minimum amount of RAM required is 4Mb. On the Hades, only the Tseng PCI
 VGA cards (et4000/et6000/et6100) are supported in the \*V release. When
@@ -16,6 +16,8 @@
 In addition of the rule of thumb for the swap size mentioned below, you
 probably want to make sure that the size of the swap partition does not
 drop below 20Mb (30Mb for systems with X).
+Another item are the add-on packages. You might want 20-30M (or more) in
+/local (or added to /usr) to store packages from the NetBSD package system.
 As you may note the recommended size of /usr is 20M greater than
 needed. This is to leave room for a kernel source and compile tree
 as you will probably want to compile your own kernel. (GENERIC is
@@ -28,13 +30,9 @@
 The builtin SCSI host adapter
 .      Bl -hyphen
 .              It
-Should support most SCSI-drives. The drives that are
-currently tested are:
-MAXTOR 7245S, MAXTOR 7080S, SEAGATE ST157N
+Should support most SCSI-drives.
 .              It
-Should support most tape drives. The drives that are
-currently tested are:
-TANDBERG 3600, TANDBERG 3800
+Should support most tape drives.
 .              It
 Should support most CD-ROM drives.
 .              It
@@ -55,13 +53,29 @@
 .      It
 The parallel printer
 .      It
-Riebl (and possibly PAM) ethernet cards on the VME bus.
-.      It
-IDE interface on both Falcon and Hades
+IDE interface on both Falcon and Hades (includes ATAPI support)
 .      It
 The serial interface on the first 68901 UART (modem1)
 .      It
-ET4000/ET6000/ET6100-PCI (VGA) on the Hades.
+VME-bus devices (TT030/Hades)
+.      Bl -hyphen
+.              It
+BVME410 ethernet
+.              It
+Circad Leonardo 24-bit VME graphics adapter
+.              It
+Crazy Dots VME et4000 graphics adapter
+.              It
+Riebl (and possibly PAM) ethernet cards on the VME bus.
+.      El
+.      It
+PCI-bus devices (Hades only)
+.      Bl -hyphen
+.              It
+ET4000/ET6000/ET6100-PCI (VGA console)
+.              It
+Adaptec 2940U
+.      El
 .      It
 ISA-bus devices (Hades only)
 .      Bl -hyphen
@@ -71,4 +85,5 @@
 .El
 .Pp
 This list is incomplete by definition. I can not test all SCSI peripherals,
-ISA cards or PCI cards...
+ISA cards or PCI cards... If you have problems with such a peripheral, please
+contact the port-atari mailing list.