Source-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[src/netbsd-1-4]: src/sys/arch/amiga/dev Pull up revision 1.40. Approved by ...



details:   https://anonhg.NetBSD.org/src/rev/18328c630940
branches:  netbsd-1-4
changeset: 468333:18328c630940
user:      mhitch <mhitch%NetBSD.org@localhost>
date:      Sat Apr 17 18:22:35 1999 +0000

description:
Pull up revision 1.40.  Approved by Curt Sampson.
A request sense operation is required on ATAPI devices so the Unit Attention
status gets cleared.  Changing CDROM media now works without needing to reboot
the system.

diffstat:

 sys/arch/amiga/dev/idesc.c |  41 ++++++++++++++++++++++++++++++-----------
 1 files changed, 30 insertions(+), 11 deletions(-)

diffs (105 lines):

diff -r fe18d6154c7d -r 18328c630940 sys/arch/amiga/dev/idesc.c
--- a/sys/arch/amiga/dev/idesc.c        Sat Apr 17 17:55:14 1999 +0000
+++ b/sys/arch/amiga/dev/idesc.c        Sat Apr 17 18:22:35 1999 +0000
@@ -1,4 +1,4 @@
-/*     $NetBSD: idesc.c,v 1.38.2.1 1999/04/16 20:34:40 mhitch Exp $    */
+/*     $NetBSD: idesc.c,v 1.38.2.2 1999/04/17 18:22:35 mhitch Exp $    */
 
 /*
  * Copyright (c) 1994 Michael L. Hitch
@@ -219,6 +219,7 @@
 #define IDEF_ATAPI     0x02    /* it's an ATAPI device */
 #define IDEF_ACAPLEN   0x04
 #define        IDEF_ACAPDRQ    0x08
+#define        IDEF_SENSE      0x10    /* Doing a request sense command */
        short   sc_error;
        char    sc_drive;
        char    sc_state;
@@ -1140,6 +1141,7 @@
                        printf("idego: atapi cmd %02x\n", xs->cmd->opcode);
 #endif
                dev->sc_cur = ide;
+               ide->sc_flags &= ~IDEF_SENSE;
                return (idestart(dev));
        }
        if (xs->cmd->opcode != SCSI_READ_COMMAND && xs->cmd->opcode != READ_BIG &&
@@ -1393,8 +1395,8 @@
        u_short *bf;
 
        clen = dev->sc_flags & IDEF_ACAPLEN ? 16 : 12;
-       ide->sc_buf = xs->data;
-       ide->sc_bcount = xs->datalen;
+       ide->sc_buf = buf;
+       ide->sc_bcount = len;
 
        if (wait_for_unbusy(dev) != 0) {
                printf("ide_atapi_icmd: not ready, st = %02x\n",
@@ -1477,7 +1479,7 @@
                        printf("atapi_intr: controller busy\n");
                        return (0);
                } else {
-                       xs->error = XS_SENSE;
+                       xs->error = XS_SHORTSENSE;
                        xs->sense.atapi_sense = regs->ide_error;
                        ide_atapi_done(dev);
                        return (0);
@@ -1592,13 +1594,26 @@
                if (ide_debug)
                        printf("PHASE_COMPLETED\n");
 #endif
-               if (status & IDES_ERR) {
+               if (ide->sc_flags & IDEF_SENSE) {
+                       ide->sc_flags &= ~IDEF_SENSE;
+                       if ((status & IDES_ERR) == 0)
+                               xs->error = XS_SENSE;
+               } else if (status & IDES_ERR) {
+                       struct scsipi_sense rqs;
+
                        printf("ide_atapi_intr: error status %x err %x\n",
                            status, err);
-                       if (err & ~0x28) {      /* Ignore media change bits */
-                               xs->error = XS_SENSE;
-                               xs->sense.atapi_sense = err;
-                       }
+                       xs->error = XS_SHORTSENSE;
+                       xs->sense.atapi_sense = err;
+                       ide->sc_flags |= IDEF_SENSE;
+                       rqs.opcode = REQUEST_SENSE;
+                       rqs.byte2 = xs->sc_link->scsipi_scsi.lun << 5;
+                       rqs.length = sizeof(xs->sense.scsi_sense);
+                       rqs.unused[0] = rqs.unused[1] = rqs.control = 0;
+                       ide_atapi_icmd(dev, xs->sc_link->scsipi_scsi.target,
+                           &rqs, sizeof(rqs), &xs->sense.scsi_sense,
+                           sizeof(xs->sense.scsi_sense));
+                       return(1);
                }
                if (ide->sc_bcount != 0)
                        printf("ide_atapi_intr: %ld bytes remaining\n", ide->sc_bcount);
@@ -1610,7 +1625,7 @@
                }
                printf("ide_atapi_intr: unknown phase %x\n", phase);
                if (status & IDES_ERR) {
-                       xs->error = XS_SENSE;
+                       xs->error = XS_SHORTSENSE;
                        xs->sense.atapi_sense = err;
                } else
                        xs->error = XS_DRIVER_STUFFUP;
@@ -1626,7 +1641,7 @@
 {
        struct scsipi_xfer *xs = dev->sc_xs;
 
-       if (xs->error == XS_SENSE) {
+       if (xs->error == XS_SHORTSENSE) {
                int atapi_sense = xs->sense.atapi_sense;
 
                bzero((char *)&xs->sense.scsi_sense, sizeof(xs->sense.scsi_sense));
@@ -1643,5 +1658,9 @@
                ide_scsidone(dev, SCSI_CHECK);
                return;
        }
+       if (xs->error == XS_SENSE) {
+               ide_scsidone(dev, SCSI_CHECK);
+               return;
+       }
        ide_scsidone(dev, 0);           /* ??? */
 }



Home | Main Index | Thread Index | Old Index