Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/netbsd-1-4]: src/sys/arch/sun3/conf sync with GENERIC
details: https://anonhg.NetBSD.org/src/rev/12e434f8effa
branches: netbsd-1-4
changeset: 468119:12e434f8effa
user: gwr <gwr%NetBSD.org@localhost>
date: Thu Apr 08 07:00:59 1999 +0000
description:
sync with GENERIC
diffstat:
sys/arch/sun3/conf/FOUR_TTYS | 190 ++++++++++++++++++++++++++++++++++++++++
sys/arch/sun3/conf/INSTALL | 186 +++++++++++++++++++++++++++++++++++++++
sys/arch/sun3/conf/KGDB | 201 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 577 insertions(+), 0 deletions(-)
diffs (truncated from 589 to 300 lines):
diff -r 5a300624cfaf -r 12e434f8effa sys/arch/sun3/conf/FOUR_TTYS
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/sun3/conf/FOUR_TTYS Thu Apr 08 07:00:59 1999 +0000
@@ -0,0 +1,190 @@
+# $NetBSD: FOUR_TTYS,v 1.20.2.2 1999/04/08 07:00:59 gwr Exp $
+
+# FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
+# like GENERIC but both zs chips are used as ttys
+
+include "arch/sun3/conf/std.sun3"
+
+# Machines to be supported by this kernel
+options FPU_EMULATE
+options HAVECACHE # Sun3/260 VAC
+
+# Needs to be set per system. i.e change these as you see fit
+maxusers 4
+
+# Standard system options
+options KTRACE # system call tracing
+options SYSVMSG # System V message queues
+options SYSVSEM # System V semaphores
+options SYSVSHM # System V shared memory
+#options SHMMAXPGS=1024 # 1024 pages is the default
+options LKM # loadable kernel modules
+#options INSECURE # disable kernel security level
+#options UCONSOLE # Allow non-root TIOCCONS
+
+# Which kernel debugger? Uncomment either this:
+options DDB
+# ... or these for KGDB (gdb remote target)
+#makeoptions DEBUG="-g" # debugging symbols for gdb
+#options KGDB
+#options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
+
+# Other debugging options
+#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
+#options DEBUG # kernel debugging code
+#options DIAGNOSTIC # extra kernel sanity checking
+#options KMEMSTATS # kernel memory statistics (vmstat -m)
+#options PMAP_DEBUG
+#options SCSIDEBUG
+#options SCSIVERBOSE # Verbose SCSI errors
+
+# Compatability options
+options COMPAT_SUNOS # can run SunOS 4.1.1 executables
+options COMPAT_43 # and 4.3BSD and ...
+options COMPAT_10 # NetBSD 1.0
+options COMPAT_11 # NetBSD 1.1
+options COMPAT_12 # NetBSD 1.2
+options COMPAT_13 # NetBSD 1.3
+#options COMPAT_LINUX # can run Linux/m68k executables
+#options EXEC_ELF32 # 32-bit ELF executables (Linux)
+
+# Filesystem options
+file-system FFS # Berkeley Fast Filesystem
+file-system NFS # Sun NFS client support
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+file-system FDESC # /dev/fd/*
+file-system KERNFS # /kern
+file-system NULLFS # loopback file system
+file-system PROCFS # /proc
+file-system UNION # union file system
+file-system MFS # memory-based filesystem
+
+options NFSSERVER # nfs server support
+options QUOTA # FFS quotas
+#options FFS_EI # FFS Endian Independant support
+
+# Networking options
+options INET # IP prototol stack support
+options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
+#options GATEWAY # IP packet forwarding
+#options ISO,TPIP # OSI networking
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25
+#options PFIL_HOOKS # pfil(9) packet filter hooks.
+
+# Work-around for root on slow servers (insurance...)
+options NFS_BOOT_RWSIZE=1024
+options NFS_BOOT_BOOTPARAM
+
+config netbsd root on ? type ?
+
+# On-board I/O space (required)
+include "arch/sun3/conf/obio.sun3"
+
+# On-board memory (optional)
+# See frame-buffers
+obmem0 at mainbus?
+
+# VME bus support (optional)
+# One unit for each address space
+vme0 at mainbus? # A16/D16
+vme1 at mainbus? # A16/D32
+vme2 at mainbus? # A24/D16
+vme3 at mainbus? # A24/D32
+vme4 at mainbus? # A32/D16
+vme5 at mainbus? # A32/D32
+
+#
+# Serial ports
+#
+zstty0 at zsc1 channel 0 # ttya
+zstty1 at zsc1 channel 1 # ttyb
+#
+# Note that by ommitting "kdb0" and "ms0" one can build
+# a kernel that operates four plain serial lines, where
+# two of them are data-leads-only ports wired up using
+# a custom cable on the keyboard connector. The flags 1
+# part sets TIOCFLAG_SOFTCAR (remember, data-leads-only).
+# Note: the signal levels on these are 0/5 Volt TTL.
+#
+zstty2 at zsc0 channel 0 flags 1 # ttyc
+zstty3 at zsc0 channel 1 flags 1 # ttyd
+
+#
+# Network devices
+#
+
+# Intel Ethernet (onboard, or VME)
+ie0 at obio0 addr 0x0C0000 ipl 3
+ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
+
+# Lance Ethernet (only onboard)
+le0 at obio0 addr 0x120000 ipl 3
+
+# All Sun3 machines with an "le" (3/50, 3/60) should be
+# presumed to have the old, buggy LANCE chip. (Rev. C)
+options LANCE_REVC_BUG
+
+#
+# Disk and tape devices
+#
+
+# Sun3 "si" SCSI controller (NCR 5380)
+# See GENERIC for the flags description.
+si0 at obio0 addr 0x140000 ipl 2
+si0 at vme2 addr 0x200000 ipl 2 vect 0x40
+si1 at vme2 addr 0x204000 ipl 2 vect 0x41
+
+# Xylogics 450/451 controllers (VME A16/D16)
+xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
+xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
+xy* at xyc? drive ?
+
+# Xylogics 7053 controllers (VME A16/D32)
+xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
+xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
+xd* at xdc? drive ?
+
+# Xylogics 472 tape controllers?
+
+# Sun3/E SCSI+Ethernet board (VME A24/D16)
+# Note: the board uses vect and vect+1
+sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
+sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
+si* at sebuf?
+ie* at sebuf?
+
+#
+# Frame buffer devices
+# (not useful if no kbd, right?)
+
+#
+# SCSI infrastructure
+#
+scsibus* at scsi?
+
+sd* at scsibus? target ? lun ? # SCSI disks
+st* at scsibus? target ? lun ? # SCSI tapes
+cd* at scsibus? target ? lun ? # SCSI CD-ROMs
+ch* at scsibus? target ? lun ? # SCSI changer devices
+ss* at scsibus? target ? lun ? # SCSI scanners
+uk* at scsibus? target ? lun ? # unknown SCSI devices
+
+# Memory-disk drivers
+pseudo-device md 2
+
+# Misc.
+pseudo-device loop 1 # network loopback
+pseudo-device bpfilter 8 # packet filter
+pseudo-device sl 2 # CSLIP
+pseudo-device ppp 2 # PPP
+pseudo-device tun 2 # network tunneling over tty
+#pseudo-device gre 2 # generic L3 over IP tunnel
+#pseudo-device ipfilter # ip filter
+# rnd is EXPERIMENTAL
+#pseudo-device rnd # /dev/random and in-kernel generator
+
+pseudo-device pty 32 # pseudo-terminals
+#pseudo-device vnd 4 # paging to files
+#pseudo-device ccd 4 # concatenated disks
+#pseudo-device raid 4 # RAIDframe disk driver
diff -r 5a300624cfaf -r 12e434f8effa sys/arch/sun3/conf/INSTALL
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sys/arch/sun3/conf/INSTALL Thu Apr 08 07:00:59 1999 +0000
@@ -0,0 +1,186 @@
+# $NetBSD: INSTALL,v 1.3.2.2 1999/04/08 07:00:59 gwr Exp $
+#
+# INSTALL - Installation kernel for the Sun3
+#
+# This kernel is derived from GENERIC with some features commented out.
+#
+# This kernel does NOT support X, mice, non-NetBSD emulation, etc.
+#
+
+include "arch/sun3/conf/std.sun3"
+
+# Machines to be supported by this kernel
+options FPU_EMULATE
+options HAVECACHE # Sun3/260 VAC
+
+# Needs to be set per system. i.e change these as you see fit
+maxusers 2
+
+# Standard system options
+#options KTRACE # system call tracing
+#options SYSVMSG # System V message queues
+#options SYSVSEM # System V semaphores
+#options SYSVSHM # System V shared memory
+#options SHMMAXPGS=1024 # 1024 pages is the default
+#options LKM # loadable kernel modules
+#options INSECURE # disable kernel security level
+#options UCONSOLE # Allow non-root TIOCCONS
+
+# Which kernel debugger? Uncomment either this:
+#options DDB
+# ... or these for KGDB (gdb remote target)
+#makeoptions DEBUG="-g" # debugging symbols for gdb
+#options KGDB
+#options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
+
+# Other debugging options
+#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
+#options DEBUG # kernel debugging code
+#options DIAGNOSTIC # extra kernel sanity checking
+#options KMEMSTATS # kernel memory statistics (vmstat -m)
+#options PMAP_DEBUG
+#options SCSIDEBUG
+#options SCSIVERBOSE # Verbose SCSI errors
+
+# Compatability options
+#options COMPAT_SUNOS # can run SunOS 4.1.1 executables
+#options COMPAT_43 # and 4.3BSD and ...
+#options COMPAT_10 # NetBSD 1.0
+#options COMPAT_11 # NetBSD 1.1
+#options COMPAT_12 # NetBSD 1.2
+options COMPAT_13 # NetBSD 1.3
+#options COMPAT_LINUX # can run Linux/m68k executables
+#options EXEC_ELF32 # 32-bit ELF executables (Linux)
+
+# Filesystem options
+file-system FFS # Berkeley Fast Filesystem
+file-system NFS # Sun NFS client support
+file-system CD9660 # ISO 9660 + Rock Ridge file system
+#file-system FDESC # /dev/fd/*
+file-system KERNFS # /kern
+#file-system NULLFS # loopback file system
+#file-system PROCFS # /proc
+#file-system UNION # union file system
+#file-system MFS # memory-based filesystem
+
+#options NFSSERVER # nfs server support
+#options QUOTA # FFS quotas
+#options FFS_EI # FFS Endian Independant support
+
+# Networking options
+options INET # IP prototol stack support
+options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
+#options GATEWAY # IP packet forwarding
+#options ISO,TPIP # OSI networking
+#options EON # OSI tunneling over IP
+#options CCITT,LLC,HDLC # X.25
+#options PFIL_HOOKS # pfil(9) packet filter hooks.
+
+# Work-around for root on slow servers (insurance...)
+options NFS_BOOT_RWSIZE=1024
+options NFS_BOOT_BOOTPARAM
+
+config netbsd root on ? type ?
+
+# On-board I/O space (required)
+include "arch/sun3/conf/obio.sun3"
+
+# On-board memory (optional)
+# See frame-buffers
+# obmem0 at mainbus?
+
+# VME bus support (optional)
+# One unit for each address space
+vme0 at mainbus? # A16/D16
+vme1 at mainbus? # A16/D32
+vme2 at mainbus? # A24/D16
+vme3 at mainbus? # A24/D32
+vme4 at mainbus? # A32/D16
+vme5 at mainbus? # A32/D32
+
+#
+# Serial ports
Home |
Main Index |
Thread Index |
Old Index