Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/arm/ti Fix inverted ti, needs-special-hs-handling pr...
details: https://anonhg.NetBSD.org/src/rev/3609ced71f67
branches: trunk
changeset: 465547:3609ced71f67
user: jmcneill <jmcneill%NetBSD.org@localhost>
date: Wed Nov 27 23:03:24 2019 +0000
description:
Fix inverted ti,needs-special-hs-handling property logic and enable EDMA support
diffstat:
sys/arch/arm/ti/ti_sdhc.c | 11 +++--------
1 files changed, 3 insertions(+), 8 deletions(-)
diffs (46 lines):
diff -r 72a89fa5911e -r 3609ced71f67 sys/arch/arm/ti/ti_sdhc.c
--- a/sys/arch/arm/ti/ti_sdhc.c Wed Nov 27 23:02:54 2019 +0000
+++ b/sys/arch/arm/ti/ti_sdhc.c Wed Nov 27 23:03:24 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: ti_sdhc.c,v 1.3 2019/10/29 22:19:13 jmcneill Exp $ */
+/* $NetBSD: ti_sdhc.c,v 1.4 2019/11/27 23:03:24 jmcneill Exp $ */
/*-
* Copyright (c) 2011 The NetBSD Foundation, Inc.
* All rights reserved.
@@ -29,7 +29,7 @@
*/
#include <sys/cdefs.h>
-__KERNEL_RCSID(0, "$NetBSD: ti_sdhc.c,v 1.3 2019/10/29 22:19:13 jmcneill Exp $");
+__KERNEL_RCSID(0, "$NetBSD: ti_sdhc.c,v 1.4 2019/11/27 23:03:24 jmcneill Exp $");
#include <sys/param.h>
#include <sys/systm.h>
@@ -180,7 +180,6 @@
sc->sc_addr = addr;
sc->sc_bst = faa->faa_bst;
-#if notyet
/* XXX use fdtbus_dma API */
int len;
const u_int *dmas = fdtbus_get_prop(phandle, "dmas", &len);
@@ -198,10 +197,6 @@
sc->sc_edma_chan[EDMA_CHAN_RX] = -1;
break;
}
-#else
- sc->sc_edma_chan[EDMA_CHAN_TX] = -1;
- sc->sc_edma_chan[EDMA_CHAN_RX] = -1;
-#endif
if (bus_space_map(sc->sc_bst, addr, size, 0, &sc->sc_bsh) != 0) {
aprint_error(": couldn't map registers\n");
@@ -219,7 +214,7 @@
sc->sc.sc_flags |= SDHC_FLAG_8BIT_MODE;
if (of_hasprop(phandle, "ti,needs-special-reset"))
sc->sc.sc_flags |= SDHC_FLAG_WAIT_RESET;
- if (of_hasprop(phandle, "ti,needs-special-hs-handling"))
+ if (!of_hasprop(phandle, "ti,needs-special-hs-handling"))
sc->sc.sc_flags |= SDHC_FLAG_NO_HS_BIT;
if (of_hasprop(phandle, "ti,dual-volt"))
sc->sc.sc_caps = SDHC_VOLTAGE_SUPP_3_0V;
Home |
Main Index |
Thread Index |
Old Index