[src/trunk]: src/sys/arch/arm/ti Use 297MHz for display clock

[jmcneill <jmcneill%NetBSD.org@localhost>]

details:   https://anonhg.NetBSD.org/src/rev/767019e2a7fb
branches:  trunk
changeset: 465076:767019e2a7fb
user:      jmcneill <jmcneill%NetBSD.org@localhost>
date:      Mon Nov 04 09:37:51 2019 +0000

description:
Use 297MHz for display clock

diffstat:

 sys/arch/arm/ti/am3_prcm.c |  13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diffs (55 lines):

diff -r 5b00868f18da -r 767019e2a7fb sys/arch/arm/ti/am3_prcm.c
--- a/sys/arch/arm/ti/am3_prcm.c        Mon Nov 04 09:11:00 2019 +0000
+++ b/sys/arch/arm/ti/am3_prcm.c        Mon Nov 04 09:37:51 2019 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: am3_prcm.c,v 1.9 2019/11/03 22:59:06 jmcneill Exp $ */
+/* $NetBSD: am3_prcm.c,v 1.10 2019/11/04 09:37:51 jmcneill Exp $ */
 
 /*-
  * Copyright (c) 2017 Jared McNeill <jmcneill%invisible.ca@localhost>
@@ -28,7 +28,7 @@
 
 #include <sys/cdefs.h>
 
-__KERNEL_RCSID(1, "$NetBSD: am3_prcm.c,v 1.9 2019/11/03 22:59:06 jmcneill Exp $");
+__KERNEL_RCSID(1, "$NetBSD: am3_prcm.c,v 1.10 2019/11/04 09:37:51 jmcneill Exp $");
 
 #include <sys/param.h>
 #include <sys/bus.h>
@@ -52,7 +52,6 @@
 #define        AM3_PRCM_CLKCTRL_MODULEMODE             __BITS(1,0)
 #define        AM3_PRCM_CLKCTRL_MODULEMODE_ENABLE      0x2
 
-/* WKUP */
 #define        AM3_PRCM_CM_IDLEST_DPLL_DISP    (AM3_PRCM_CM_WKUP + 0x48)
 #define         AM3_PRCM_CM_IDLEST_DPLL_DISP_ST_MN_BYPASS      __BIT(8)
 #define         AM3_PRCM_CM_IDLEST_DPLL_DISP_ST_DPLL_CLK       __BIT(0)
@@ -64,6 +63,8 @@
 #define          AM3_PRCM_CM_CLKMODE_DPLL_DISP_DPLL_EN_MN_BYPASS       4
 #define          AM3_PRCM_CM_CLKMODE_DPLL_DISP_DPLL_EN_LOCK            7
 
+#define        DPLL_DISP_RATE                          297000000
+
 static int am3_prcm_match(device_t, cfdata_t, void *);
 static void am3_prcm_attach(device_t, device_t, void *);
 
@@ -100,8 +101,8 @@
                        delay(10);
                }
 
-               /* Set DPLL frequency to 270 MHz */
-               val = __SHIFTIN(270, AM3_PRCM_CM_CLKSEL_DPLL_DISP_DPLL_MULT);
+               /* Set DPLL frequency to DPLL_DISP_RATE (297 MHz) */
+               val = __SHIFTIN(DPLL_DISP_RATE / 1000000, AM3_PRCM_CM_CLKSEL_DPLL_DISP_DPLL_MULT);
                val |= __SHIFTIN(24 - 1, AM3_PRCM_CM_CLKSEL_DPLL_DISP_DPLL_DIV);
                PRCM_WRITE(sc, AM3_PRCM_CM_CLKSEL_DPLL_DISP, val);
 
@@ -141,7 +142,7 @@
        TI_PRCM_FIXED("FIXED_24MHZ", 24000000),
        TI_PRCM_FIXED("FIXED_48MHZ", 48000000),
        TI_PRCM_FIXED("FIXED_96MHZ", 96000000),
-       TI_PRCM_FIXED("DISPLAY_CLK", 270000000),
+       TI_PRCM_FIXED("DISPLAY_CLK", DPLL_DISP_RATE),
        TI_PRCM_FIXED_FACTOR("PERIPH_CLK", 1, 1, "FIXED_48MHZ"),
        TI_PRCM_FIXED_FACTOR("MMC_CLK", 1, 1, "FIXED_96MHZ"),